158557
2
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
LISTENING TO THE TUNER
1. Press the POWER ON/OFF (22).
2. Press the TUNER Button(9), the TUNER LED Indicator(25) will light up.
3. Open the Control Button Cover(17).
4. Select AM/FM band by the Band Switch (14).
5. Select your radio station by turning TUNING Knob(7 & 28) and adjust the volume level by pressing
VOLUME / Button(21)
6. Press X-BASS Button(19) if extra bass is desired. The X-BASS LED indicator(5) will light up.
FOR BEST RECEPTION :
FM : Loose the FM Antenna wire(33), when select the stereo mode by the MONO /STEREO Push Switch(13), and the stereo
broadcast was received, FM STEREO LED(2) will light up.
AM : This unit is equip with a built-in directional ferrite antenna, so move and rotate the unit.
7. To stop listen the radio, press the POWER ON/OFF (22).
LISTEN TO THE CD
1. Press the POWER ON/OFF (22).
2. Press the CD button(8), the CD LED Indicator(24) will light up and the CD Track Number Display(1) will show ”.
3. Insert the disc (Label side up) to the CD Compartment(29 & 30), the total number of track is displayed(1).
4. Press CD PLAY/PAUSE Button(10) to start playing and adjust the VOLUME level(21).
5. Press the X-BASS Button(19) if extra bass is desired. The X-BASS LED indicator(5) will light up.
NOTE : Use also CD PLAY/PAUSE button(10) to suspend momentarily the playing track. The current track number
blinks on the display(1), and press again to resume play.
6. Press CD STOP button(11) to stop listen the CD.
OTHER CD PLAYER FUNCTIONS
CD SKIP/FAST SEARCH Button(18) : Press to skip forward to the next track or repeatedly to skip several
tracks. Press Button return to the beginning of the track, or press repeatedly to skip backward several tracks. Press and
hold the or button to search quickly within a track.
REPEAT BUTTON(15) : A single Track or whole CD can be repeated as any time as you like.
a) Press once to repeat your select track, the REPEAT LED (3) will blinks
b) Press twice to play the disc continuously, the REPEAT LED (3) will light up.
c) Press again to switch off this function.
MIX BUTTON(12) : Press to play randomly all the track & REPEAT ALL, the MIX LED(6) and REPEAT LED will light up and
the selected track number are displayed(1).
PROGRAM BUTTON(16) : To select your own musical program.
a) Insert the disc(29 & 30), the total number of the tracks is displayed(1).
b) Press PROG. Button(16), the PROGRAM LED Indicator(23) and the track No. and CD
TRACK NUMBER DISPLAY (1) " " will blinks.
c) Select with SKIP/FAST SEARCH (18) your desired track, then press PROGRAM
Button(16) to store your program in memory and the " " & PROGRAM LED blinks. Redo
this operation as many times as necessary. 16 tracks can memorised.
d) Press CD PLAY/PAUSE Button(10) to start playing and the PROGRAM LED Indicator(23)
will become light up.
e) Press CD Stop Button(11) to stop the disc. PROGRAM LED(23) continue light on. Press stop
Button (11) again to cancel this function.
- 3 - - 4 -
POWER SUPPLY
This set operates at AC 240V - 50Hz
1. Insert the AC Power Cord(32) into a convenient standard outlet.
Note: If the unit is switched off by pressing the STANDBY button on the remote control, it will be kept in the memory of
standby. To turn on the unit:
- by presing the STANDBY button on the remote control or
- by pressing the POWER ON/OFF button (22) on the unit. Wait for about 5 seconds, press the same button again. The unit
will be reset to tuner mode and the tuner LED indicator (25) will light on.
CONNECT THE SPEAKER
1. Loose the Speaker Wire(35) and connect to the Speaker Terminal(31),
BLACK/WHITE wire connect to RED terminal,
BLACK wire connect to BLACK terminal.
2. Locate two speakers to a far distance can get the good stereo effect.
Black &
White
Black
REMOTE HANDSET
1. STAND BY : turn unit on/off (STANDBY mode)
2. CD : turn CD mode on
3. SKIP / SEARCH :
skip the CD track or search within a track.
4. VOLUME + / - : turn volume up / down
5. PLAY : play or pause CD play
6. STOP : stop CD play
7. TUNER : turn tuner mode on and select waveband
USE OF REMOTE CONTROL
1. Open the Battery Compartment
2. Insert two AAA batteries (not supplied), make sure to match
“+” and “-” of the batteries to marks in the battery
compartment.
3. Close the battery compartment.
4. Point the remote control at the remote sensor, operate in the range of 5 meters and 60º from the front of the
remote sensor. Make sure there is no barrier between them.
Notes: 1. Batteries can last for about 6 months generally. Change the batteries if the remote control does not work.
2. If the remote control is not used for a long time, remove the batteries to prevent battery leakage.
3. Do not charge, heat open, or short-circuit the batteries. Do not throw batteries into a fire.
1
2
4
3
5
6
7
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai qx 2100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai qx 2100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Akai qx 2100

Akai qx 2100 Gebruiksaanwijzing - Français - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info