630525
15
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
15
Gate: The length of the note events of the sequence, shown as a percentage of the
current time division setting. The available range is 00% (very short and staccato-
sounding; certain devices may not respond to notes this short) to 99% (longer and
legato-sounding). The default setting is 50%.
Swing: The amount of swing—a “shuffle” or triplet-based feel—that is applied to the
sequence. The available range is 50% (no swing, the default setting) to 75%
(completely swung).
Important: The swing setting is affected by the time division. Furthermore, if your time
division is triplet-based, swing will not be applied.
Recording
To record a sequence in real time:
1. Press Seq Rec. The sequencer will start recording immediately and Seq On/Off will be lit.
If you used Edit Mode to change the button or message that starts the sequencer’s
playback (Play or MIDI Start), the sequencer will not start recording until you press Play
or send it a MIDI Start message.
2. Press the pads to record their note events and velocities as steps in the sequence. You
can play and record multiple pads simultaneously. The step buttons will show the note
events for the last pad you pressed.
The sequence will loop until you stop it. As it loops, if you record a note event over an
existing one for the same pad, the new note event will replace the old one. Otherwise, your
previously recorded note events will remain in the sequence.
3. Press Seq Rec to stop recording.
4. Press Seq On/Off to stop playback.
If you used Edit Mode to change the button or message that stops the sequencer’s
playback (Stop or MIDI Stop), the sequencer will not stop recording until you press Stop
or send it a MIDI Stop message.
Editing
You can edit a sequence while it is playing or stopped. You can do this by using the pads and
step buttons or by using just the display, Cursors, and Data Dial.
To enter or erase note events in a sequence using the pads and step buttons:
1. Press Seq Edit to enter Sequence Edit Mode.
2. Press the pad whose note events you want to edit. The current pad number will appear next
to Track in the display, and any note events for that pad will appear in the step buttons.
The current pad will be lit green when it has a note event on the current step or red when
the current step is empty. The other pads will be lit amber when they have note events on
the current step or blue when the current step is empty.
3. To add a note event for that pad, press an unlit step button.
To erase a note event for that pad, press a lit step button.
4. To add or erase note events for another pad, repeat Steps 2–3.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai MPD232 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai MPD232 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 3,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info