630548
22
Verklein
Vergroot
Pagina terug
1/373
Pagina verder
22
39. << / >> (Start / End): Use these buttons to move the audio pointer left/right, one bar at a time. Hold
Locate and press one of these buttons to move the audio pointer to the start or end of the
Sequence Grid.
40. Locate: Hold this button down to activate the secondary functions of the < / > and << / >> buttons
(i.e., |< / >| and Start / End, respectively).
41. Erase: As a Sequence is playing, hold this button down and press a pad to delete the note event
for that pad at the current playback position. This is a quick way to delete note events from your
Sequence without having to stop playback.
42. Tap Tempo: Press this button in time with the desired tempo to enter a new tempo (in BPM) in the
software.
I/O and Level Controls
43. Mic In / Phono In Switch: Use this switch to select the Mic In or Phono In jacks on the rear panel.
If you are using a mic or other line-level audio source connected to the Mic In jacks, select Mic In.
If you are using a phono-level device like a turntable connected to the Phono In jacks, select
Phono In.
44. Rec Gain: Use this knob to adjust the gain of the incoming signal from the Mic In or Phono In
jacks on the rear panel. Monitor the recording level by viewing the level meter (LEDs) above the Mic
In / Phono In Switch. Be careful when setting this knob at higher levels, which can cause the
signal to distort.
45. Direct Mon: Use this knob to adjust the balance between the Input and Comp signals in the
headphones. The Input signal consists of the Mic In or Phono In jacks—turn the knob all the way
to Input for zero-latency direct monitoring. The Comp signal is the normal software playback.
When not recording, we recommend turning this knob all the way to the Comp position.
46. Main Volume: Use this knob to adjust the volume level of the Stereo Out jacks.
47.
Vintage Mode: Press this to toggle through the available Vintage Modes. The MPC3000 and
MPC60 settings emulate the sounds of those classic MPCs, while the Other setting emulates the
sound of vintage sampling drum machines. When none of the LEDs are lit, Vintage Mode is off.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Akai MPC Software bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai MPC Software in de taal/talen: Engels als bijlage per email.

De handleiding is 20,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info