496561
5
Verklein
Vergroot
Pagina terug
1/101
Pagina verder
En
ENGLISH
5
POSITIONING THE SPEAKERS
To achieve the optimum effects obtainable with the Dolby
Digital or the Dolby Pro Logic system, it is important to position
the speakers properly. Refer to the following illustration to
find out the best location in your room.
L&R: Front speakers
C: Center speaker
Position in the center of the two front speakers. In addition,
position on or below the TV set, if connecting a TV set to the
unit.
LS&RS: Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area. Align them horizontally, about 1
meter (3.2 feet) above ear height.
NOTE
Sound output from the center and the surround speakers is
only available when the Dolby Digital system, the Dolby Pro
Logic system, or the DSP Surround system is activated with
the appropriate setting.
To mount the surround speakers on the wall
Mount each speaker on a spot that can hold its weight.
AM antenna
FM antenna
PREPARATIONS
5 Connect the supplied antennas.
Connect the FM antenna to FM 75 terminals and the AM
antenna to AM LOOP terminals.
6 Connect your video equipment (DVD player, LD
player, video tape player, etc.).
If your video equipment has an OPTICAL OUT jack
;
Connect the AUDIO OUT jacks of the video equipment to
the VIDEO1/DVD/AUX jacks of this unit with an optional
audio connecting cord with RCA phono plugs (red plug to
the R jack, white plug to the L jack).
Connect the OPTICAL OUT jack to the DIGITAL IN OPTICAL
(VIDEO 1) jack of this unit with an optional optical connecting
cord.
If your video equipment has a COAXIAL OUT jack
;
Connect the AUDIO OUT jacks of the video equipment to
the VIDEO2/LD/MD jacks of this unit with an optional audio
connecting cord with RCA phono plugs (red plug to the R
jack, white plug to the L jack).
Connect the COAXIAL OUT jack to the DIGITAL IN
COAXIAL (VIDEO 2) jack of this unit with an optional coaxial
connecting cord.
NOTE
Input to the DIGITAL IN OPTICAL jack is selected with
the VIDEO1/DVD/AUX button, while input to the DIGITAL
IN COAXIAL jack is selected with the VIDEO2/LD/MD
button (see Listening to external equipment, page 32).
Analog connection should thus be made to the input jacks
with the corresponding names depending on the type of
digital connection, as described above.
The illustration shows the connection to the VIDEO1/DVD/
AUX jacks.
If your video equipment has both OPTICAL and COAXIAL
OUT jacks, choose either connection.
When connecting an LD player via its AC-3 RF OUT jack,
use an RF demodulator to separate the analog visual
signals and the digital audio signals. Refer the operating
instructions of the LD player.
If your video equipment does not have a digital out jack
;
Connect the AUDIO OUT jacks of the video equipment to
the VIDEO1/DVD/AUX jacks of this unit with an optional
audio connecting cord with RCA phono plugs (red plug to
the R jack, white plug to the L jack).
7 Connect the television to the video equipment.
Refer to the Operating Instructions of the connected
equipment for details.
8 Connect the AC cord to an AC outlet.
The DEMO will begin when the AC cord is plugged into an
AC outlet for the first time. To deactivate the DEMO, set the
clock.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aiwa NSX-DS8 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aiwa NSX-DS8 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 5,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info