496137
25
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
-
Page 45
-
Note: You can find and download the complete Installation guide at
our web site www.aiptek.de under "Technische Hilfe / Anleitungen"
Win98-Users: Please be sure that your operating system is Windows
98 SE (second edition). The camera will not function properly using
the Windows 98 (first edition) operating system
¾ The Live Mode functions properly but downloading pictures and
videos in not possible.
This problem could occur if the drivers were not properly installed. The
drivers include three components that windows will automatically
install and integrate into your system one after another. If one or more
components were improperly installed, some features may not
available or operate correctly
Note: You can find and download the complete Installation guide at
our web site www.aiptek.de under "Technische Hilfe / Anleitungen"
.
¾ When I open the Mega Cam Manager I receive the message
”Camera can not be connected” or “Camera busy”.
If you receive this message, there could be a number of reasons for
this problem. Please refer to the following possibilities:
When you connect the camera to the USB – Port, the camera should
automatically turn on (check the display on the reverse side of the
camera). Remove the batteries from the camera and connect –
disconnect – connect the camera from the USB Cable. You should
hear a short beep and the camera should turn on automatically.
If the camera remains off, then the camera is most likely defect or the
USB Port is not supplying enough power to the camera. Try installing
the camera to a different computer if possible. If the camera installs
properly then the problem is due to a faulty operating system.
Ensure that the camera has been correctly recognised by your
operating system. Go to the Device Manager and connect the camera
to the USB Cable. Three new components should appear, one under
Cameras and Scanners and two under Universal Serial Bus
Controller. If not then the camera has not been properly recognised.
Note: You can find and download the complete Installation guide at
bit itkd d "T h i h Hilf / A l it "
-
Page 46
-
¾ While in the PC-Mode, the picture freezes after a couple of
seconds.
This problem could occur with cameras that have an older main board.
A modification of the main board is necessary. Please contact your
dealer or send the camera directly to us (Only for customers living in
Germany).
¾ The PC crashed when making videos from the PC-Mode using
Windows 98SE
This problem can occur when the DMA of the hard drive controller is not
activated (Windows 98SE default setting).
Do the following to check the DMA-mode setting:
Open the device manager and click on the “+” next to the entry “drives”.
Double click on “GENERIC DISK TYPE” then click on “Settings”.
Under “Options” you will see a box next to DMA. Click on this box to
activate the DMA-mode. You must reboot the computer in order for the
changes to take effect.
Attention: Not all hard drives support the DMA-mode. Refer to your
manual or contact the manufacture to see if your hard drive is
supported.
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aiptek mini pencam plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aiptek mini pencam plus in de taal/talen: Engels als bijlage per email.

De handleiding is 2,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Aiptek mini pencam plus

Aiptek mini pencam plus Gebruiksaanwijzing - Deutsch - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info