618082
17
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
17
F11 OPERATING MANUAL
© 2002 Design, 2013 Doc. No. 12-7285-r01 (5/3/13)
Set RTI (Repeating Time Interval) Alarm, information includes (Fig. 30):
> Graphic RTI with min_sec icons.
> Time (min:sec).
> Graphic ON (or OFF), flashing.
A (< 2 sec) - to step forward through the selections of OFF, ON, and SET.
M (< 2 sec) - to step back through the selections.
S (2 sec) - to step back to Set SRT.
S (< 2 sec) - to save the setting.
> If OFF or ON is saved, operation will advance to Set RDI Alarm.
> If SET is saved, the Minute digits will flash.
A (< 2 sec) - to step upward through the Minute set points from 0: to 9: one at a time.
M (< 2 sec) - to step back through the Minute set points one at a time.
S (2 sec) - to step back to SET flashing.
S (< 2 sec) - to save the Minute setting and flash the Seconds digits.
A (hold) - to scroll upward through the Second set points at a rate of 8 per second from :00* to :59 in increments of 1 second.
*Starts at :10 (sec) minimum when Minutes are set for 0: (min).
A (< 2 sec) - to step upward through the Second set points one at a time.
M (< 2 sec) - to step back through the Second set points one at a time.
S (2 sec) - to step back to Minutes digits flashing.
S (< 2 sec) - to save the min:sec setting (digits solid) and flash the graphic SEt allowing ON or OFF to be selected/saved.
Set RDI (Repeating Depth Interval) Alarm, information includes (Fig. 31):
> Graphic RDI.
> Depth interval with FT (or M) icon.
> Graphic ON (or OFF), flashing.
A (< 2 sec) - to step forward through the selections of OFF, ON, and SET.
M (< 2 sec) - to step back through the selections.
S (2 sec) - to step back to Set RTI Alarm.
S (< 2 sec) - to save the setting.
> If OFF or ON is saved, operation will advance to Set DA1 Alarm.
> If SET is saved, the Depth digits will flash.
A (hold) - to scroll upward through the Depth set points at a rate of 8 per second from 10 to 100 FT (3 to 33 M) in increments
of 1 FT (1 M).
A (< 2 sec) - to step upward through the set points one at a time.
M (< 2 sec) - to step back through the set points one at a time.
S (2 sec) - to step back to SET flashing.
S (< 2 sec) - to save the setting (digits solid) and flash the graphic SEt allowing ON or OFF to be selected/saved.
Set DA1 Depth Alarm (DA2 to DA6 similar), information includes (Fig. 32):
> Graphic DA1.
> Depth with FT (or M) icon.
> Set point ON (or OFF), flashing.
A (< 2 sec) - to step forward through the selections of OFF, ON, and SET.
M (< 2 sec) - to step back through the selections.
S (2 sec) - to step back to Set RDI Alarm.
S (< 2 sec) - to save the setting.
> If OFF or ON is saved, operation will advance to Set DA2 Alarm.
> If SET is saved, the Depth digits will flash.
A (hold) - to scroll upward through the Depth set points at a rate of 8 per second from 10 to 495 FT (3 to 150 M) in increments
of 1 FT (1 M).
A (< 2 sec) - to step upward through the Depth set points one at a time.
M (< 2 sec) - to step back through the Depth set points one at a time.
S (2 sec) - to step back to SEt flashing.
S (< 2 sec) - to save the Depth setting and display the Set DA1 Audible screen.
Fig. 32 - SET DA DEPTH
Fig. 31 - SET RDI ALARM
Fig. 30 - SET RTI ALARM
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aeris F11 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aeris F11 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info