646705
2
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
1
1. Transmission source
The source where the signal will be transmitted.
2. Signal transmission indication
Blink to confirm that the last setting has been transmitted to the unit.
3. “ON/OFF” Button
Press once to start the air conditioner unit.
Press again to stop the unit.
4. Temperature setting
To set the desired room temperature, press the or button to increase or decrease the set temperature.
The temperature setting range is from 16°C to 30°C (Optional setting 20°C to 30°C).
Press both buttons simultaneously to toggle and from °C to °F setting.
5. Operation mode
Press the MODE button to select the type of operating mode.
For cooling only unit, the available modes are: COOL ( ), DRY ( ) and FAN ( ).
6. Fan speed selection
Press the button continuously will toggle the fan speed in the following order:
Low –––
:
Med –––
:
High –––
:
Auto
Stop pressing when the desired fan speed appears on the display screen.
7. Turbo function
Press for fast cooling.
The temperature will be decreased if in COOL or DRY mode.
Fan speed will be increased if it is not at maximum speed.
The temperature and fan speed will resume to user setting if is pressed again or after 20 minutes.
Available under COOL and DRY modes only.
8. ON timer setting
Press the SET button will activate the on timer function.
Set the desired on time by pressing the SET button continuously. If the timer is set to 7.30am, the air conditioner will
turn on at 7.30am sharp.
Press the CLR button to cancel the on timer setting.
9. OFF timer setting
Press the SET button will activate the off timer function.
Set the desired off time by pressing the SET button continuously.
Press the CLR button to cancel the off timer setting.
10. Automatic air swing (optional)
Press the SWING button to activate the automatic air swing function.
To distribute the air to a specific direction, press the SWING button and wait until the louver move to the desired
direction and press the button once again.
11. Sleep mode setting
Press the SLEEP button will activate the sleep mode function.
This is an energy saving option. When the unit is operating under cooling mode, the set temperature is
increased by 0.5°C after the first half an hour, 1°C after the second half an hour and total of 2°C after
the following 1 hour. This function will prevent excessive cooling during summer season.
This function is available under COOL and AUTO mode.
12. Clock time setting
Press + button to increase the clock time.
Press -- button to decrease the clock time.
13. Personalize setting
Press and hold for 3s, then will blink. Press again to cycle between and .
Set the desire setting, then leave the handset for 4s without pressing any key and it will save the setting into the
programme.
Press once to activate the P1 setting, press again to cycle between P1 and P2.
Press any key to deactivate the personalize setting.
14. Ionizer setting (optional)
Press will activate the ionizer function.
Press again to deactivate the function.
OPERATING GUIDE
+2 C
+1 C
- 1 C
- 2 C
0 0.5 1 1.5 2
CONTENTS
- Operating Guide page 1
- G12 Remote Controller Indication page 2
- Indicator Lights page 4
- Installation of Aroma page 5
- Auto Random Re-Start Function page 5
- Service and Maintenance page 5
- Troubleshooting page 6
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Acson G12 Remote Controller Indication bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Acson G12 Remote Controller Indication in de taal/talen: Engels als bijlage per email.

De handleiding is 0,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info