621837
4
Verklein
Vergroot
Pagina terug
1/114
Pagina verder
CAMIP5N1
V. 05 04/06/2015 4 ©Velleman nv
4
lens
10
power LED
5
microphone
11
network LED
6
Wi-Fi antenna
12
5V DC input jack (2A)
6. Hardware installation and operation
1. Choose a location for the camera, keeping following guidelines in mind:
o Do not install the camera in locations where extremely high or low temperatures or excessive vibrations
may occur.
o Avoid mounting the camera near high electro-magnetic fields.
o Do not aim the camera at the sun or other extremely bright objects.
2. The camera can be used free standing or in combination with the included mounting bracket. When the
mounting bracket is used, attach it to the wall or ceiling using the 2 included screws. Place the camera on
top and secure it with the centre screw. Determine the desired angle and tighten the joint screws.
3. Connect the antenna [6] to the antenna connector and/or connect a network cable (included) to the 8P8C
(RJ45) jack [9].
Note: it is possible to connect the camera straight to the 8P8C (RJ45) port of a computer. In this case a
crossed cable (not incl.) should be used and network settings must be configured manually.
4. An external microphone (not incl.) can be connected to the audio input [8].
5. When desired, an external speaker system can be connected to the audio output [7].
6. Plug the DC connector of the power adaptor into the 5VDC input jack [12]. Only use the included adaptor
or one with the same specifications.
7. Plug the adaptor into a suitable mains outlet (100~240V AC/50~60Hz).
Notes:
It takes about 30 seconds for the camera to initialise.
During initialisation the camera will start moving to test the pan/tilt functionality.
If the image appears out of focus, turn the lens [4] to adjust.
7. Installing the software
To use the camera, you need to install the software IP Camera Tool on your computer.
7.1 Microsoft Windows
Software requirements
To work with the IP Camera Tool, you need a recent version of one of the following browsers:
Internet Explorer (32 bits version only)
Mozilla Firefox
Google Chrome
Safari
Opera
Note: the functions and layout of the surveillance tool vary depending on the browser you are using. The
images in this manual are from Internet Explorer on Microsoft Windows.
Installing the IP Camera Tool
The package contains a cd-rom with the required software.
1. Insert the cd-rom in the computer and locate the software installer (IPCamSetup.exe).
2. Double-click the installer to launch the installation wizard and go through the steps of the wizard.
If you are using Windows XP, you may need to restart your PC to complete the installation.
3. You will find the shortcut IP Camera tool on your desktop.
7.2 Apple Macintosh
Software requirements
To work with the IP Camera Tool, you need a recent version of one of the following browsers:
Mozilla Firefox
Google Chrome
Safari
Opera
Installing the IP Camera Tool
The package contains a cd-rom with the required software.
1. Locate the IP Camera Tool for Mac on the CD.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AVTech - Velleman CAMIP5N1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AVTech - Velleman CAMIP5N1 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 1,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van AVTech - Velleman CAMIP5N1

AVTech - Velleman CAMIP5N1 Installatiehandleiding - Alle talen - 49 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info