621841
5
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
CAMIP21
V. 02 – 01/07/2015 5
Proceed as follows:
1
Take the
hole
measurements
based on the camera stand.
Pre
-
d
rill
a hole with the 5
bit and drill the final hole with the 15 mm bit. Next, place a nylon plug
(included)
Also provide a hole for the power cable.
2
Secure the camera stand on the surface using the
included screws and a #2 Phillips
screwdriver. Make sure not to overtighten
the screws as this may damage the camera stand.
3
Loosen the thumbscrew. Adjust the proper angle and secure with the T-
bolt
7. Operation
7.1 Before You Start
ATTENTION
Before connecting your CAMIP21 camera to the power source, first
connect it to your Wifi router using the included
Ethernet cable.
After the camera is connected to the router, connect it to the power
source
and wait until both the red and green LEDs flash. Do not begin
the setup process until both LEDs become steady (roughly 45
seconds).
Follow the steps in the following pages to complete the setup.
©Velleman nv
a hole with the 5
mm drill
(included)
in each hole.
included screws and a #2 Phillips
the screws as this may damage the camera stand.
bolt
.
Before connecting your CAMIP21 camera to the power source, first
Ethernet cable.
After the camera is connected to the router, connect it to the power
and wait until both the red and green LEDs flash. Do not begin
seconds).
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AVTech - Velleman CAMIP21 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AVTech - Velleman CAMIP21 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 1,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info