520607
4
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
4
1. Important Information
Keep these instructions in a safe place and pass them on to
possible future owners.
Use device for room heating within enclosed rooms only.
Repairs and corrective measures may only be carried out by
skilled technicians.
Disconnect the power supply in the event of fault (pull out
the device plug or switch off the fuse).
Do not use this device next to the bathtub, shower,
washbasin or swimming pool.
The device carries the symbol shown on the right,
which indicates that the heating device must under
no circumstances be covered with any objects.
Children or persons who are not capable of operating the
device safely must not operate the heating device. Ensure
that children do not play with the device.
Caution! Potential dangers can arise when the device
switches on automatically, e.g. devices which have been
covered or blocked by objects since they were last used can
cause fire.
Do not operate the heating device in rooms where highly
flammable substances are used (e.g. solvents, etc.).
Do not lay the connecting cable across the device.
2. Technical Device Description
Heat output: 2000 W Degree of protection: IP21
Connection voltage: 1/N~, 230-240 V, 50 Hz
Dimensions in mm: (W x H x D) 235 x 569 x 235
3. Installation
Do not cover the heating device with any objects; fire hazard!
The fan heater may only be used as shown, i.e. on a horizontal,
even surface. Using it on deep pile carpets is not permitted.
Please use caution when installing it in front of flammable
objects. The power plug must always be accessible.
Observe the minimum clearances.
4. Electrical Connection
The voltage information on the type plate must match the local
mains voltage.
The indicator lamp is lit, when the device is plugged in.
When the power cord of this device is damaged, it must be
replaced by a qualified person, in order to avoid risks.
5. Operation
Start the heater by pressing the on/off button.
5.1 Setting the operating mode
Pressing the "Operating mode" button allows you to choose
between the following functions.
5.1.1 Automatic mode
The device heats at the high heating level. You can set the
temperature you want using the +/- buttons. The device
switches off automatically when the set temperature is reached
and back on again when the temperature falls below the value
set.
5.1.2 Fan mode
Fan on without heating.
5.1.3 Heating mode - low heating level
The device heats at 50% of the maximum heat output. The
temperature cannot be set.
5.1.4 Heating mode - high heating level
The device heats at the maximum heat output. The
temperature cannot be set. All of the valid settings made using
the buttons are confirmed by an acoustic signal. The settings
made last are saved as long as the device is plugged in.
5.2 Rotating mode
Pressing the "OSC" button switches rotating mode on and off.
The heater rotates by a total of 90° to the left an d right in fan or
heating mode.
5.3 Timer
Pressing the "Timer" (remaining time) button limits the heater's
operating time. If, for instance, "1HR" is set, the device
switches off after one hour has elapsed. It is only possible to
set full hours up to a maximum of 8 hours of remaining time.
Warning!
Depending on the size of the room, heat requirement and
thermostat setting, rooms may overheat if the heating is not
controlled. This can be dangerous for people who are not able
to leave the room as it gets too hot.
Operating Instructions
Fan Heater HC 210 TSD
GB
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AKO HC 210 TSD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AKO HC 210 TSD in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info