382748
3
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
2
ENGLISH
STEP 570 X, STEP 600 X
Always disconnect the plug from the socket before carrying out any work on the
machine.
1. Push the tension lever as far as it will go,
as shown in the illustration.
2. Fit the saw blade into the groove in the
support roller and push it firmly into the
plunger as far as it will go; the lug of the
saw blade must be in the plunger (see
illustration).
3. Release the tension lever and the saw
blade is gripped automatically.
4. Check that the saw blade fits firmly (wear protective
gloves!); the slot in the plunger must always be at an
angle to the saw blade (see illustration below).
When fixing the saw blade it might be in a slightly
sloping position.
When first cutting it will adjust automatically.
Brief description
15
0
B
A
III
II
I
0
Modifications: Text, diagrams and data are
correct at the time of printing. In the interest of
continuous improvement of our products,
technical specifications are subject to alteration
without prior notice.
The on-off switch can be fixed in the
On- position for continuous operation
by means of the locking button.
The on-off switch is shaped in such a way
that it can be used from the forward or the
rear holding position.
The built-in pendulum stroke improves the cutting performance.
The pendulum stroke of the saw blade means it is only pressed
against the material on the reverse stroke (working stroke) and
lifted off the material on the forward stroke.
Result: better extraction of sawdust, lower friction > higher cutting
performance.
The pendulum stroke can be adjusted by the pendulum stroke
control and thus adapted to different kinds of material.
The sawdust blower removes sawdust ahead of
the cut very practical when sawing along a line.
The anti-splintering device almost entirely
prevents the edge of the wood from
splintering.
Integrated suction channel
for connection to a
vacuum-cleaner.
The vibration damper permits quieter running by
means of a counterweight on the plunger.
Integrated tool storage for
spare blade.
The base plate can be tilted to both sides by 45
o
for bevel cuts.
The stroke-rate (= movements per minute of the saw
blade) can be infinitely varied by means of the
adjustment wheel.
The saw blade can be changed in seconds by
using the tension lever.
Transparent cover for optimum sawdust removal.
Inserting the
saw-blade
15
0
II
I
0
3

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

AEG-step-570-x

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG step 570 x bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG step 570 x in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info