426976
2
Verklein
Vergroot
Pagina terug
1/83
Pagina verder
1
ENGLISH
OF 500 S, OFE 710
You are demanding and expect to purchase quality goods – quality offered by Atlas
Copco. We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely. We are sure that buying an AEG Electric Power
Tool from Atlas Copco was the right choice!
OF 500 S OFE 710
Nominal power 500 W 710 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No-load speed 34 000 min
-1
30 000 min
-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum no–load speed in case of
ineffective no–load speed limitation 39 000 min
-1
. . . . . . . . . . . . . . . . . . . . . . .
Cage stroke 50 mm 50 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Collet diameter 6 mm, 8 mm, 1/4”* 6 mm, 8 mm, 1/4”*. . . . . . . . . . . . .
Router diameter (HSS/HM) max. 36 mm max. 36 mm. . . . . . . . . . . . . . . . . .
Abrasive grinding body diam. max.
for ceramic resin 20 mm 20 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
for plastic resin 38 mm 38 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear neck diameter 43 mm 43 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 2,9 kg 2,9 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
*Not included in standard equipment, available as an accessory.
J Please pay attention to the safety instructions in the attached leaflet!
J Always use the protective shields on the machine.
J Always wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
J Sawdust and splinters must not be removed while the machine is running.
J Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
J Always disconnect the plug from the socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
J Keep mains lead clear from working range of the machine. Always lead the cable
away behind you.
J Only use professionally grinded router cutters.
J All inserted tools which are used must be admitted for the max. speed of rotation!
J The workpieces sould be clamped down before cutting.
J Put the router back to original position after usage (loosen clamping lever to secure
cage).
J After switching off, the machine will not be idle immediately. (After–running of the
work spindle.)
J Only move the workpiece in counter rotation to cutter (only work oppositely oriented)!
For security, use devices such as safety– and pressure device, guide slide, rip fence,
etc.
J For ceramic abrasives or silicane rubber polishers with a safe peripheral speed of
45 m/s, the grinding body diameter must not exceed 20 mm.
With synthetic resin plastic abrasives with a safe peripheral speed of 80 m/s, the
grinding body diameter must not exceed 38 mm
J The dust that arises when working with this tool can be detrimental to health (e.g.
when working oak or beech wood, stones, paint, which could contain lead or other
harmful chemicals) and therefore not reach the body.
Use a dust absorption system and wear a suitable dust protection mask.
Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
J Typically the A-weighted noise levels of the tool are:
Sound pressure level = 82 dB (A). Sound power level = 95 dB (A).
Wear ear protectors!
J Typically the weighted acceleration is 4 m/s
2
.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Mains
connection
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

AEG-of-500-s

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG of 500 s bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG of 500 s in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 4,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info