464429
7
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
Energy consumption monitoring
The thermostat calculates the average switch-on time thus making it possible to monitor energy consumption.
The thermostat displays the energy consumption as a percentage for the last 2, 30 or 365 days.
Calculation of operational costs per day: (switch-on time:100) x kW x kWh price x 24 hours per day.
Example: 30% displayed for the last 365 days.
Heating system wattage: 0.32 kW (e.g. thermo floor 2 m2 with 160 W/m2).
Power costs 0.15 EUR / kWh
Calculation (30:100) x 0.32 kW x 0.15 EUR / kWh x 24 hours = 0.35 EUR per day.
5. Special settings and displays
Time program
The selected time program flashes: Days 1–5 followed by days 6–7. To change this setting, press the UP button until days 1-6
and then day 7, or all 7 days are flashing. Select the required time program by pressing the OK button.
OK
-
5-2: 4 time programs over 5 days +
}
factory setting
2 time programs over 2 days
6-1: 4 time programs over 6 days +
2 time programs over 1 day
7-0: 4 time programs over 7 days
OK
-
}
2 days
30 days
365 days
Software Version
Regulation sensor
}
Press the UP and DOWN buttons at the same time for 5 seconds. INFO is displayed. Press the UP button until the required submenu
is displayed. Select the submenu by pressing OK.
Press UP or DOWN to show
the different displays. No
changes can be made here.
Press the OK button to leave
the menu.
Function program (factory setting)
Limit sensor (only displayed when the function roLi is selected)
Function selection
The electronic comfort thermostat FRTD 902 features an integrated and an external temperature sensor.
FRTD 902 can be programmed as a floor thermostat with floor sensor or as a room thermostat with limit function.
Upon delivery the thermostat is programmed as a Flo floor thermostat.
OK
-
In this configuration the temperature is regulated by means
of a built-in room sensor and a floor sensor for limitation.
Floor sensor with 3 m connecting cable.
In this configuration the temperature is only regulated by
means of a floor temperature sensor. Floor sensor with 3 m
connecting cable.
}
Maximum and minimum permissible temperatures on floor surface
The maximum value is used to prevent the floor temperature from rising too much, e.g. in connection with wooden floors that cannot
withstand temperatures in excess of 27°C. This value can be set between 5-40°C.
The minimum value is used to prevent the temperature in for example kitchens and bathrooms from falling below the set
temperature. This value can be set between 5-40°C. The value can be deactivated (ON/OFF) by setting the temperature to 5°C and
pressing the DOWN button again.
Please note that the maximum value must be higher than the minimum value.
OK
-
Max. permissible temperature. Press the UP or DOWN
button to increase or lower the value. Press OK to
confirm the setting.
LSLO is then displayed. Press the OK button to
continue.
Min. permissible temperature. Press the UP or DOWN
button to increase or lower the value. Press OK to
confirm the setting.
Temperature range limitation
The temperature range from +5°C to 35°C can be limited in order to prevent the selection of a temperature that is either too high or
too low.
Max. temperature setting
Press the UP or DOWN button to increase or lower the
value. Press the OK button to accept the setting.
LoLi is then displayed. Press the OK button to continue.
Min. temperature setting
Press the UP or DOWN button to increase or lower the
value. Press OK to accept the setting.
OK
-
OK
-
OK
-
OK
-
OK
-
OK
-
OK
-
OK
-
OK
-
OK
-
OK
-
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

AEG-FRTD-902

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG FRTD 902 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG FRTD 902 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van AEG FRTD 902

AEG FRTD 902 Gebruiksaanwijzing - Nederlands - 8 pagina's

AEG FRTD 902 Installatiehandleiding - Nederlands, Deutsch, English, Français - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info