49525
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
AUG 05, 2002 4 of 8 PD99025-1
jump to “set minutes” minute.
Press ‘FF’ or ‘RW’ to select minutes Prompt at each selection.
Press ‘Time’ button to accept setting. Prompt the days, hours and minute then back to
standby or off mode.
Note: If no confirmation within 10 second or the STOP button is pressed during each setting step, the
A/M will keep the old setting.
2.3 Set number of rings to answer, default rings – 3 rings
Press and hold the ‘Ring’ button for 2 seconds A short beep to start set rings, prompt ‘Please set
ring’, pause then prompt & display current rings
number.
Press ‘FF’ or ‘RW’ to select 2 - 9 rings or toll saver Prompt at each selection.
Press ‘Ring’ button to accept setting Prompt setting then back to standby or off mode.
Note: If no confirmation within 10 second or the STOP button is pressed during each setting step, the
A/M will keep the old setting.
2.4 Set security code, default codes - 321
Press and hold the ‘Code’ button for 2 seconds A short beep to start set code, prompt ‘Set security
code’, pause then prompt the first code, display
symbol ‘S1’.
Press ‘FF’ or ‘RW’ to select the 1 st digit Prompt at each selection.
Press ‘Code’ button to accept setting and jump to set
the next digit
Prompt first digit selected and a short beep then
prompt second code, display symbol ‘S2’.
Press ‘FF’ or ‘RW’ to select the 2 nd digit Prompt at each selection.
Press ‘Code’ button to accept setting and jump to set
the next digit
Prompt second digit selected and a short beep then
prompt third code, display symbol ‘S3’.
Press ‘FF’ or ‘RW’ to select 3 rd digit Prompt at each selection.
Press ‘Code’ button to accept setting Prompt the third digit selected and a long beep then
prompt the three selected codes. Then back to standby
or off mode.
Note: Press ‘Stop’ button at any time or the A/M wait for the code key press more than the “10 seconds
time out” limit, the A/M will quit setting and back to standby or off mode. All setting will be unchanged.
3. Message play back
3.1 No message
Press ‘Play’ button Prompt ‘You have no message’
3.2 There is(are) message(s.)
Press ‘Play’ button Prompt number of message and number of new
message, then a short beep + day/time stamp and play
message, then a short beep + day/time stamp and next
message. If there is no more message, a long beep,
prompt ‘End of message’ to end play back
During play back press ‘RW’ button Replay the current message again start from begin
During play back press ‘RW’ twice in a second Backward to the previous message
During play back press ‘FF’ button Skip the current message and go to next message
During play back press ‘Pause’ button The message is pause and lasts for 30 sec. To
continue the playback, press ‘Play/Pause’ button
again. Otherwise, after 30 sec. pause, it stops the
playback mode automatically. During “pause” the
display symbol is ‘| |’.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw AEG AB300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van AEG AB300 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van AEG AB300

AEG AB300 Gebruiksaanwijzing - Nederlands, Deutsch - 25 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info