620410
65
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
en
65
System Control - ACVMax: 660Y2800 • B
EN
FR
NL
ES
IT
DE
PL
RU
BLOCKAGE AND ERROR CODES
BLOCKAGE AND ERROR CODES
Codes Description of the fault Solution for the fault
E 01 Failed ignition: The burner failed to light after 5 ignition attempts.
1. Check gas supply to boiler.
2. Check Ignition cable connection in control box.
3. Check electrode for defects, and distance between the pins.
4. Check gas valve and electrical connections to gas valve.
E 02 False ame: Flame detected prior to ignition.
1. Check good electrical ground connection to unit.
2. Check electrode for pollution and deposition of dirt.
E 03 High Boiler temp. : The boiler temperature exceeds 105°C
Correct condition which caused high temperature or limit to open.
1. Check water ow in the system (radiator valves).
2. Check Pump and pump electrical connections.
E 05 Blower speed: Blower speed not correct or speed signal is not received by ACVMax.
1. Check blower and wiring harness.
2. Under normal condition if actual fan speed is 1000 rpm dierent from set fan speed an error is displayed (after 60sec in
running and after 30 sec. at startup).
3. Only exception when actual fan speed > 3000 rpm at max. PWM.
E 07 High Flue temp.: Flue temperature exceeds high limit.
1. Heat exchanger may require cleaning.
2. Boiler will automatically reset once flue temperature returns to normal range.
E 08 Flame Circuit Error: Flame circuit test failed
1. Turn boiler o.
2. Check and clean the electrode.
3. Check ignition and grounding cables are rmly connected.
E 09 Gas valve circuit error: Gas valve circuit test failed.
1. Check the gas valve and wiring harness.
2. If the problem persists replace the ACVMax circuit board.
E 12 Internal Fault: EEPROM misconguration
1. Turn unit o and on to resume normal operation.
2. If the problem persists replace the ACVMax circuit board.
E 13 Reset limit reached: Resets are limited to 5 every 15 minutes.
1. Turn unit o and on to resume normal operation.
2. If the problem persists replace the ACVMax circuit board.
E 15 Sensor Drift: Supply or return sensor reading has drifted. Check supply and return temperature sensors and wiring harness.
E 16 Supply Sensor Stuck: Supply sensor reading is not changing.
1. Check supply temperature sensor and wiring harness for shortcuts or other defects.
2. Check waterow and the temperature balance in the system, because CH supply temperature does not change.
E 17 Return Sensor Stuck: Return sensor reading is not changing.
1. Check return temperature sensor and its position, check wiring harness for shortcuts or other defects.
2. Check waterow and the temperature balance in the system, because CH return temperature does not change.
3. Failure may happen at low output capacity when supplying from a big tank !
E 18 Sensor Failure: Supply or return sensor reading changed very rapidly. Check supply and return temperature sensors and wiring harness.
E 21 Internal Control Fault: A / D conversion error. Turn unit o and on then press OK to resume normal operation.
E 25 Internal Control Fault: CRC check error. Turn unit o and on to resume normal operation.
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ACV Prestige bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ACV Prestige in de taal/talen: Engels als bijlage per email.

De handleiding is 13,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info