495463
23
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
3M Super Close Projection System SCP712 Operator’s Guide
© 3M 2008. All Rights Reserved. 23
Troubleshooting
Common Problems and Solutions
Symptom Cause Solution
No power. The power cord is disconnected. Insert the power cord into AC socket.
The desired input source is not selected.
Press the remote control Input button to
select a desired input source.
The cables from the input source are not
connected.
Connect the cable to correct input
source.
No picture or sound.
The input source is not turned on or not
displaying an image. (e.g. If a notebook
computer, the external monitor port is
not turned on).
Turn on input source.
The internal temperature is too high. Check exhaust for obstructions.
The lamp will not ignite or has turned
off.
The lamp has reached maximum life or
has prematurely failed.
Replace lamp.
The VGA/Video cables are not
connected.
Connect the cables to the correct input
source.
Sound is heard with no picture.
The VGA/Video/Audio cables are
connected to the wrong input.
Change Input Menu to correct video
input setting.
The audio cables are connected to the
wrong input.
Connect the cables to the correct input
source.
Check the audio/video configuration.
Set proper configuration through the
menu.
The volume is set to Minimum. Turn up Volume.
Picture is displayed with no sound
The Mute is on. Turn off Mute.
The brightness setting is too low. Adjust the brightness
Picture is dark or dim.
The lamp needs to be replaced. Replace lamp.
The input source is not active. A signal
must be present for the input to be
selected.
Connect an active input source to unit.
Desired input source cannot be
detected.
The input device (e.g. computer, DVD
player, etc.) is not turned on.
Turn on input source.
The remote control is not facing the
remote control sensor.
Face the remote control toward the
remote control sensor.
The remote control is too far from the
sensor.
Operate the remote control within 5
meters.
An obstruction is between the remote
control and the sensor.
Remove obstacle.
The remote control does not work.
The remote control’s batteries are
exhausted or inserted wrong.
Correctly insert batteries.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw 3m SCP712 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van 3m SCP712 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info