534678
5
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
UP Plus
3D Printer User Manual
1. I
ntroduction
1.1 How
to use this
This User Manual
is divided into four sections which cover
and Troubleshooting.
Please
according to these
instructions
1.2 Precautions
Please read this section
carefully before using the printer
1.2.1 Safety
The printer can only be
used with
may be damage
d, with a risk of
To avoid burning,
or model deformation, d
or any other
part of the body
printing.
Protective glasses should always be worn when removin
The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please
do not hold the extruder block with the gloves.
There is a slight smell from ABS when it is being extruded. The smell is,
pleasant. Operate in a
well ventilated room
prints. When ABS is burnt is releases toxic fumes.
Do not use ABS plastic or its printed parts near any kind of heat source, flames,
incense, light bulbs, rockets
etc. ABS will catch fire and burn a thick black smoke.
Always have adult supervision when children are present. Please keep all small printed parts away
from young children, choking hazards! There are sever
HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose
clothing. Keep fingers away from moving parts.
Tools and parts should
be stored at a suitable height away from sm
Tools should be used in conjunction with safety gloves
2.
3D Printer User Manual
v 2013.6.10
ntroduction
to use this
manual
is divided into four sections which cover
the
Introduction, Overview, Operation,
Please
study this manual carefully before installation,
and
instructions
. Keep this manual handy and refer
to it when necessary.
carefully before using the printer
.
used with
the power adapters
supplied by this company, or
d, with a risk of
fire.
or model deformation, d
o not touch the model, nozzle, or the platform by hand
part of the body
, while the printer is working or
immediately after it has
Protective glasses should always be worn when removin
g support material, especially PLA.
The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please
do not hold the extruder block with the gloves.
There is a slight smell from ABS when it is being extruded. The smell is,
however, not too u
well ventilated room
but draught free. D
raughts can affect warping of ABS
prints. When ABS is burnt is releases toxic fumes.
Do not use ABS plastic or its printed parts near any kind of heat source, flames,
fireworks, candles,
etc. ABS will catch fire and burn a thick black smoke.
Always have adult supervision when children are present. Please keep all small printed parts away
from young children, choking hazards! There are sever
al safety issues, small tools, sharp tools and
HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose
clothing. Keep fingers away from moving parts.
be stored at a suitable height away from sm
all children.
Tools should be used in conjunction with safety gloves
and glasses.
2.
Overview
Introduction, Overview, Operation,
and
use the printer
to it when necessary.
supplied by this company, or
the product
o not touch the model, nozzle, or the platform by hand
,
immediately after it has
finished
g support material, especially PLA.
The brown sections of the currently supplied gloves melt at around 200 degrees, therefore please
however, not too u
n-
raughts can affect warping of ABS
fireworks, candles,
etc. ABS will catch fire and burn a thick black smoke.
Always have adult supervision when children are present. Please keep all small printed parts away
al safety issues, small tools, sharp tools and
HOT objects and most parts used in connection with the 3D Printer. Tie back long hair and loose
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw 3Dprintingsystems UP Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van 3Dprintingsystems UP Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 7,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info