691438
1
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
PANOPTIX
LIVESCOPE
INSTALLATION
INSTRUCTIONS
Important Safety Information
WARNING
See the Important Safety and Product Information guide in the
chartplotter product box for product warnings and other
important information.
You are responsible for the safe and prudent operation of your
vessel. Sonar is a tool that enhances your awareness of the
water beneath your boat. It does not relieve you of the
responsibility of observing the water around your boat as you
navigate.
CAUTION
Failure to install and maintain this equipment in accordance with
these instructions could result in damage or injury.
Always wear safety goggles, ear protection, and a dust mask
when drilling, cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite
side of the surface.
To obtain the best performance and to avoid damage to your
boat, you must install the Garmin
®
device according to these
instructions.
Read all installation instructions before proceeding with the
installation. If you experience difficulty during the installation, go
to support.garmin.com for more information.
Registering Your Device
Help us better support you by completing our online registration
today. Keep the original sales receipt, or a photocopy, in a safe
place.
1
Go to my.garmin.com/registration.
2
Sign in to your Garmin account.
Software Update
You must update the software when you install this device.
If your Garmin chartplotter has WiFi
®
technology, you should
update the software using the ActiveCaptain
app on a
compatible Android
or Apple
®
device. If your chartplotter does
not have has WiFi technology, you should update the software
using a memory card and a Windows
®
computer.
For more information, go to support.garmin.com.
Tools Needed
Drill
4 mm (
5
/
32
in.) and 3.2 mm (
1
/
8
in.) drill bits
Masking tape
#2 Phillips screwdriver
Marine sealant
32 mm (1
1
/
4
in.) hole saw (optional)
Cable ties (optional)
Mounting Considerations
You must angle the transducer correctly for your selected
mode to work properly.
You must install the sonar module in a location with adequate
ventilation where it will not be exposed to extreme
temperatures.
You should mount the transducer in a location where it will
not be jarred when launching, hauling, or storing.
You should mount the transducer in a location where it is not
behind strakes, struts, fittings, water intake or discharge
ports, thru-hull transducers, or anything that creates air
bubbles or causes the water to become turbulent. Turbulent
water may interfere with the sonar beam.
You should mount the transducer as close to the center line
of the boat as possible.
When mounted farther from the center of the transom, a
greater deadrise can cause the boat hull to interfere with
the sonar beam , and can cause inconsistent detection on
the opposite side of the boat
. The transducer is shown
from behind.
On single-drive vessels, you must not mount the transducer
in the path of the propeller.
On twin-drive vessels, you should mount the transducer
between the drives, if possible.
You should mount the sonar module in a location where the
LEDs are visible.
You should mount the sonar module in a location where the
cables can be easily connected.
Cable Considerations
NOTICE
Separating the Siamese cables near the rotating joint on a
cable-steered trolling motor reduces stress and extends the life
of the cables.
Zip ties and cable clamps can over-tighten and damage or break
the cable, or cause cable fatigue due to repeated rotation of the
motor.
You should use black electrical tape to secure the cables above
and below the rotating joint. If you secure the cables with zip
ties, do not over-tighten the zip ties.
You should secure the cables above and below the pivot joint of
your trolling motor.
You should create a service loop at least 25 cm (10 in.) long in
the cables, with the rotating joint centered on the loop.
You should use the included tool, a flathead screwdriver, or a
blunt knife to separate the cables.
May 2019
190-02210-90_0C
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin Panoptix Livescope bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin Panoptix Livescope in de taal/talen: Engels als bijlage per email.

De handleiding is 2,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Garmin Panoptix Livescope

Garmin Panoptix Livescope Installatiehandleiding - Nederlands - 6 pagina's

Garmin Panoptix Livescope Installatiehandleiding - Deutsch - 6 pagina's

Garmin Panoptix Livescope Installatiehandleiding - Français - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info