624831
4
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
Operation Guide 5325
E-30
To change the current day setting manually
1. Pull out the crown.
This will cause the x
Second Hand to move to the city code of
the currently selected Home City.
2. Hold down C for about one second until the watch beeps and the
x
Second Hand moves to 12 o’clock.
This indicates the manual time setting mode.
3. Press C twice. This will enter the day setting mode.
The n
Day Indicator will move slightly to indicate the setting
mode.
4. Rotate the crown to adjust the day setting.
5. After the n
Day Indicator stops moving, press C. This will enter
the month setting mode.
The x
Second Hand will move to the currently selected month.
6. Rotate the crown to adjust the month setting.
7. Press C. This will enter the year setting mode.
The z
Hour Hand will move to the number that represents the
tens digit of the year and the c
Minute Hand will move to the
number that represents the ones digit. The x
Second Hand will
move to 12 o’clock and stop there.

6
@
@
Dec
Nov
Feb
Mar
Apr
Oct
Sep
Aug
Jan
Jul May
Jun
Setting the month
E-25
Confi guring Home City Settings
The Home City is location where you will normally use the watch. You can choose from a selection of city
codes that represent 29 cities around the globe.
To confi gure Home City settings
Note
This watch does not have a city code that corresponds to Newfoundland.
1. Pull out the crown.
This will cause the x
Second Hand to move to the city code of the
currently selected Home City.
This indicates the city code setting mode.
If you do not perform any operation with the crown for about two
minutes after pulling it out, crown operations will become disabled and
the hand will not move if you rotate the crown. If this happens, push the
crown back in and then pull it out again.
For details about city codes, see the “City Code Table” at the back of
this manual.
2. Rotate the crown to move the x
Second Hand to the city code you want to
select as your Home City.
Each time you select a city code, the z
Hour Hand, c Minute Hand
and n
Day Indicator move to the current time and day for that city
code.
3. Push the crown back in to return to the Timekeeping Mode.

@
TYO (TOKYO)

+
6@
B
E-24
Timekeeping
To enter the Timekeeping Mode, hold down C at least two seconds.
Hand Functions
z Hour Hand
x Second Hand
c Minute Hand
v Upper Dial Hand: Indicates the current hour in the Home City time in
24-hour format.
b Lower Dial Hand: Points to the day of the week.
n Day Indicator

+
6*
@>B
E-26
STD/DST Switching
You can select summer time or standard time independently for each city. The initial default setting for all
cities is AUTO.
Normally you should use the AUTO setting because it automatically switches between summer time
and standard time. You should change the setting to STD (standard time) or DST (summer time) in the
following cases.
When using a time of a location that is not included in the watch’s list of 29 cities
When the preset AUTO standard time/summer time timing is incorrect for some reason
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard Time.
Remember that not all countries or even local areas use Daylight Saving Time.
Note that you cannot switch between STD (standard time) and DST (daylight saving time) while UTC*
is selected as your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The reference point for
UTC is Greenwich, England.
E-27
To switch between standard time and summer time manually
1. Perform steps 1 and 2 under “To confi gure Home City settings” (page E-25).
Selecting a city code will cause the z
Hour Hand, c Minute Hand, and v Upper Dial Hand to
move automatically to the current time for the selected city code.
If you will use the watch in a city that is not included in the city code list, select a city code that is in
the same time zone as your city.
Displaying the Home City Settings screen will cause the b
Lower Dial Hand to move to AUTO (auto
switching), STD (standard time), or DST (daylight saving time).
AUTO
The watch automatically switches between standard time and daylight saving time in accordance
with its calendar.
STD The watch always shows standard time.
DST The watch always shows daylight saving time.
2. Hold down A for about one second to cycle through the summer time settings
as shown below.
A A
AUTO STD DST
A
3. After the setting is way you want, push the crown back in.
*
E-28
Confi guring Current Time and Day Settings Manually
You can confi gure current time and day settings manually when the watch is unable to receive a time
calibration signal.
To change the current time setting manually
1. Pull out the crown.
This will cause the x
Second Hand to move to the city code of the
currently selected Home City.
If you do not perform any operation with the crown for about two
minutes after pulling it out, crown operations will become disabled and
the hand will not move if you rotate the crown. If this happens, push the
crown back in and then pull it out again.
2. Change the Home City settings, if you want.
For details about these settings, see step 2 under “To confi gure Home
City settings” (page E-25).
3. Hold down C for about one second until the watch beeps and the
x
Second Hand moves to 12 o’clock.
This indicates the manual time setting mode.
In the following steps, each press of C cycles between settings as
shown below.

@
TYO (TOKYO)

+@>B
E-29
Home city/DST
Hour/Minute Hour
Year DayMonth
C
C C
C
CC
4. Rotate the crown to adjust the time (hour and minute) setting.
See “Using the Crown” (page E-3) for information about high-speed hand movement.
The v
Upper Dial Hand is synchronized with the z Hour Hand.
When adjusting the setting, check to make sure that the v
Upper Dial Hand correctly indicates an
a.m. time or p.m. time.
If you want to change the day setting at this time, press C and perform the procedure starting from
step 3 under “To change the current day setting manually” (page E-30).
5. After the settings are the way you want, push the crown back in to return to the Timekeeping Mode.
This causes timekeeping to resume with the x
Second Hand starting from 12 o’clock.
E-31
8. Rotate the crown to adjust the year setting.
If you want to change the time setting at this time, press C and then perform the procedure starting
from step 4 under “To change the current time setting manually” (page E-28).
+
Year setting (ones digit)
0
1
2
3
4
9
8
6
57
B
Year setting (tens digit)
00
10
20
30
40
90
80
60
5070
9. After the settings are the way you want, push the crown back in to return to the Timekeeping Mode.
This causes timekeeping to resume with the x Second Hand starting from 12 o’clock.
Note
The watch’s built-in full automatic calendar makes allowances for different month lengths and leap
years. Once you set the day, there should be no reason to change it except after you have the watch’s
rechargeable battery replaced or after power drops to Level 3.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Casio 5325 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Casio 5325 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Casio 5325

Casio 5325 Gebruiksaanwijzing - Deutsch - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info