479837
3
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
Recapitulatory table of the programmable functions through the two -channels transmitter.
Function Manufacturer function Programmable function
1
Additional siren outlet Continuous sound Alternate sound
2
Acoustic signalling De-activated Activated
3
Boot opening with alarm disarmed De-activated Activated
4
Boot opening with alarm armed
With alarm disarmed if the 3
functions has been activated
Both functions
(Panic excluded)
5
Vehicle’s check De-activated Activated
6
Central door locking short period 0,5 seconds 1 second
7
Automatic arming Activated De-activated
8
Comfort While closing the doors After the blinker flashing
WORKING DESCRIPTION
- ALARM ARMING: press on the transmitter’s button N. 1. One pulse of the direction indicator lights signals
the arming.
- EXCLUSION OF THE VOLUMETRIC SENSOR, EXTERNAL SENSORS AND COMFORT CONTROL
AFTER THE ALARM ARMING: while alarm armed (even if the boot opening function with alarm armed is
activated), during the inhibit time (Led lightning fix) press on the transmitter 2 button. The exclusion is
signalled by one pulse of the direction indicator lights, the comfort function and the sensors are excluded.
This function de-activates at the first arming of the alarm.
- ALARM DISARMING: press on the transmitter’s button N. 1.
The disarming is signalled through 3 pulses of the direction indicator lights or 5 pulses if an alarm condition
has occurred.
SPECIAL FUNCTIONS
SELF-LEARNING OF THE CODE OF A NEW TRANSMITTER.
The self-learning of a new transmitter can be obtained with two different ways:
1. While alarm disarmed set the dip switch N.3 to ON and turn the ignition key to ON. The Led and the direction
indicator lights activate. Turning the ignition key to OFF the Led and the direction indicator lights switch off.
Press on the new transmitter button N. 1 within 8 seconds.
For each new code it is necessary to turn the ignition key to ON for one second and then to OFF.
At the end of the self-learning operation set the dip switch N.3 to OFF.
2. While alarm disarmed, open the driver’s door, turn the ignition key to ON and press on the coded transmitter
button N. 2. The Led and the direction indicator lights activate. Turning the ignition key to OFF the Led and
the direction indicator lights switch off. Press on the new transmitter’ s button N. 2 within 10 seconds.
For each new code it is necessary to turn the ignition key to ON for one second and then to OFF.
At the end of the self-learning operation, after 10 seconds the system works normally.
NOTE: the system is supplied with a maximum number of 3 transmitters.
AUTOMATIC ARMING
To obtain this function set the dip switch N. 2 to ON. 60 seconds after the disarming of the alarm, if the doors
and the boot are not opened and the ignition key is not turned to ON, the system will arm with or without closing
the vehicles doors (according to setting of the set-up 7 function).
REMOTE CONTROLLED BOOT OPENING.
The alarm unit 7060 allows opening the vehicle boot if the control is electric to negative. To obtain this function
select the set-up 3 function and press on the transmitter button N. 2 with the alarm disarmed.
If the boot opening is carried out pressing on the transmitter 2 button with the alarm armed (after selecting the
set-up 4 function), the panic function will de-activate and all the inlets inhibit for 60 seconds. If the boot is not
closed within this delay time the alarm will trigger. The opening of the boot through the transmitter is signalled
by one pulse of the direction indicator lights.
PANIC FUNCTION
To obtain this function with the alarm armed after the neutral time, press on the transmitter button N. 2 (if the 4
function- boot opening with alarm armed is de-activated). The siren, the klaxon and the direction indicator lights
activate. To de-activate this function within the 10 seconds of the alarm cycle, press on the transmitter button
N. 2.
LEDS MEMORY.
While disarming the alarm, turn the ignition key to ON to check if an attempted break-in has occurred.
Following the Led flashing it is possible to know the alarm triggering’s cause. The signalisation is repeated for
5 times.
Signalling LED Alarm triggering Alarm cycle
¬¬l¬¬ Door and boot/bonnet pin switches. 10
¬¬¬l¬¬¬ Ignition live Unlimited
¬¬¬¬l¬¬¬¬ External sensors 10
l LED OFF (2 seconds) ¬ LED ON (1 second)
Each alarm cycle is 30 seconds
The inhibit time is 30 seconds for all alarm triggering’s cause.
TRANSMITTERS BATTERY DISCHARGING
The discharging of the battery is signalled through the LED of the
transmitter. If the LED flashes while pressing one of the transmitter’s
buttons it is necessary to replace the batteries.
BATTERIES: CR1616
Note: put the batteries in the appropriate container.
TECHNICAL DATA
Power supply 10.5-14.5 V dc.
Working temperature -40° C + 85°C
Max. Current drawn alarm OFF 15 mA (with self-powered siren connected)
Transmitters frequency 433.92 MHz
Direction indicator lights relay contact capability 8A dc
Engine immobilisation relay contact capability 8A dc
Outlet horn relay contact capability 8A dc
Central door locking relay contact capability 8A dc
GEMINI 7147
DESCRIPTION.
GEMINI 7147 is 2 wires, high power electronic siren designed to be installed quickly and simply in the engine compartment.
WIRING CONNECTIONS (for the installer)
Disconnect the negative terminal of the battery and only re-connect after the installation is complete.
WIRE COLOUR FUNCTION
RED é Battery positive terminal (12V)
BLACK é To the alarm YELLOW -BLACK wire.
NOTE: connect the BLACK wire of the unit to earth.
INSTALLATION.
Install the siren in the engine compartment using the bracket and the screws supplied with the kit. Install the siren away from
areas of intense heat and turn to low the siren ear trumpet to avoid water infiltration.
Protect the wires from water and humidity and to avoid any damaging do not steam clean directly to the siren.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gemini 7060 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gemini 7060 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info