479837
2
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
DESCRIPTION
GEMINI 7060
The system 7060 is an alarm unit that can be installed on vehicles with 12 volts battery (negative earth).
FUNCTIONS
- Remote controlled alarm unit with dynamic code.
- Blinker, universal central door locking control, electric windows and sunroof closure for selected vehicles
equipped with “Pack Comfort” system.
- Perimetric protection and outlet for additional modules.
- Controls for self-powered siren, additional siren (continuous or alternate sound) and horn.
- LED’s Memory.
- Acoustic activation/de-activation (through siren or horn).
- Remote controlled panic function and / or boot opening.
- Electric engine immobilisation.
- Alarm unit functions programmable through the transmitter.
The unit is equipped with two 2-channel transmitters (art. 7208E), frequency 433.92 Mhz.
USEFUL SUGGESTIONS FOR THE INSTALLATION
- Connect the positive and negative feeding wire of the alarm system to the battery.
- Connect always the alarm Green-Brown wire to the door pin switch.
- On catalysed vehicles the engine immobilisation must be carried out on the fuel pump and the starter motor.
- Avoid routing connection wires next to interference sources.
- The ultrasonic heads must be positioned at the top of each windscreen pillar and must be pointing at each
opposite diagonal corner away from the facia outlets.
WIRING CONNECTIONS
Disconnect the negative terminal of the battery and only re-connect after the installation is complete.
FUNCTION WIRE COLOR
Earth ðð BROWN
Battery positive terminal ðð RED
Engine immobilisation (max. 10 A) ðð 2 X GREY
Ignition live ðð YELLOW
Direction indicator lights ðð 2 x ORANGE
Door pin switch ðð GREEN-BROWN
Boot/bonnet pin switches ðð GREEN
Positive alarm armed ðð PINK
External sensors inlet ðð GREEN-BLACK
Self-powered siren control ðð BLUE
Common +/- siren or klaxon ðð BLACK
Additional siren or horn control ðð YELLOW-BLACK
Negative control boot opening ðð GREY-BLACK
Comfort ðð WHITE-BLACK
Central door locking ðð
YELLOW-BLUE, RED-BLUE, YELLOW-GREY,
RED-GREY, YELLOW-BROWN, RED-BROWN
Note: The wiring harness has 2 connectors: connect the 2-pin connector to the LED and the 4-pin
connector to an additional module (shock, ultrasonic or super-high frequency module).
"DIP SWITCHES PROGRAMMING TABLE"
1 OFF Comfort POSITIVE
2 ON Comfort NEGATIVE
2 OFF Automatic arming OFF
2 ON Automatic arming ON
3 OFF Self-learning of a new code OFF (normal use)
3 ON Self-learning of a new code ON
4 OFF Closure short * period
4 ON Closure 6 seconds
* THE SHORT TIME IS SET FROM THE PROGRAMMING WITH THE TWO-CHANNELS TRANSMITTER
BETWEEN 0,5 SECONDS AND 1 SECOND.
ATTENTION: SET THE DIP SWITCHES BEVOR FEEDING THE 7060 UNIT.
TABLE OF PROGRAMMABLE FUNCTIONS THROUGH THE TWO-CHANNELS TRANSMITTER.
ACTIONS
ALARM CONDITION
VISIBLE
ACTIONS
LED FLASHING AND
SELECTED FUNCTIONS
ALTERNATIVE
ACTIONS
POWER OFF Alarm OFF - - -
Turn the ignition
key to ON
Alarm OFF
-
-
-
FEED THE UNIT
7060
Alarm ON
-
-
-
Press on the
transmitter 1 button
within 10 seconds
Access to the Set-up 1 function:
Supplementary siren
One blinker
flashing
One flashing = continuous
Two flashing = intermittent
Press on the
transmitter 1 button
Access to the Set-up 2 function:
acoustic signalling with
supplementary siren 725
Two blinker
flashing
One flashing = de-activated
Two flashing = activated
Press on the
transmitter 1 button
Access to the Set-up 3 function:
Panic and boot opening through
the transmitter
Three
blinker
flashing
One flashing = Panic and
additional siren
Two flashing = Boot opening
Press on the
transmitter 1 button
Access to the Set-up 4 function:
boot opening while alarm armed
(Panic excluded)
Four blinker
flashing
One flashing =
While alarm disarmed
Two flashing =
For both functions
Press on the
transmitter 1 button
Access to the Set-up 5 function:
vehicle check while arming the
system
Five blinker
flashing
One flashing = de-activated
Two flashing = activated
Press on the
transmitter 1 button
Access to the Set-up 6 function:
closure control period
Six blinker
flashing
One flashing = 0,5 seconds
Two flashing = 1 seconds
Press on the
transmitter 1 button
Access to the Set-up 7 function:
Automatic arming with door
closure
Seven
blinker
flashing
One flashing = activated
Two flashing = de-activated
Press on the
transmitter 1 button
Access to the Set-up 8 function:
Comfort
Eight
blinker
flashing
One flashing = while closing
Two flashing = after the
closure
Press on the
transmitter
button N. 2 to
change the
selected option.
De-activate the
+15 to memorise
the selected
options and to
exit from User
set-up.
Turn the ignition
key to OFF
Set-up exit, normal working
of the alarm
- - -
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gemini 7060 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gemini 7060 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info