58957
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Setting Up the Printer Hardware
1. Unpack 2. Remove protective materials 3. Attach the printer parts
c
Caution:
If the printer comes on when you plug in the power cord, turn off the
printer by pressing down the P power button until the printer lights
go out.
4. Connect the printer
Connect the printer cable to the ports on the computer and the printer.
Installing the Printer Software and the Ink Cartridges
For Windows
1. Make sure that printer is off, then turn on your computer.
2. Insert the printer software CD in the CD-ROM drive. If the Installer dialog
box does not appear, double-click SETUP.EXE in the CD-ROM.
3. Select Install Printer
Driver/Utility, and click .
4. Click OK in the dialog box that
appears.
5. When a message appears
prompting you to turn on the
printer, press the P power
button. The print head moves
to the ink cartridge installation
position and the Setup utility
starts automatically.
c
Caution:
Do not move the print
head by hand, as this may damage the printer.
6. Follow the Setup utility’s on-screen instructions to install the ink
cartridges.
Note:
If the Setup utility does not start, follow the instructions in the Macintosh
section of this sheet, beginning from “3. Install the ink cartridges.
When ink cartridge installation is complete, proceed to "Load paper and
check the print head nozzles" on this sheet.
For Macintosh
1. Install the printer software
c
Caution:
Turn off all virus protection programs before you install the printer
software.
1. Make sure that printer is off, then turn on your Macintosh and insert the
software CD in the CD-ROM drive.
2. Double-click the Install Software
folder, then double-click the Installer
icon inside it.
3. Click Continue.
4. Make sure that the Install Location
box displays the correct drive,
then click Install.
5. Follow the on-screen instructions
to install the printer software.
2. Select the printer
After you have installed the printer software, you need to select your printer.
1. Press the P power button to turn on the printer. The print head moves
to the ink cartridge installation position.
2. Choose Chooser from the Apple
menu. Then, select the icon for
your printer and the port that your
printer is connected to.
3. Close the Chooser.
3. Install the ink cartridges
1. Open the output tray and the printer cover, then lift up the ink cartridge
clamps, as shown in the illustrations.
c
Caution:
Do not move the print head by hand, as this may damage the printer.
2. Remove only the yellow
tape from the new ink
cartridges.
3. Position the tabs on each
ink cartridge so that they are resting
on top of the tabs protruding from the
base of the ink cartridge clamps. Do
not apply excessive force to the
cartridges.
Note:
Install both ink cartridges. The printer will not work with only one
cartridge.
4. Lower the ink cartridge clamps until they lock into place.
5. Close the printer cover.
6. Press the e ink cartridge replacement
button. The printer moves the print head
and begins charging the ink delivery
system. This process takes about one
and a half minutes. While the ink is
charging, the P power light flashes and
the printer produces a variety of
mechanical sounds. These sounds are
normal.
c
Caution:
Do not turn the power off during the ink charging process.
Do not load paper until ink charging is complete.
When the ink charging process is finished, the P power light stops flashing
and remains on.
When ink cartridge installation is complete, proceed to "Load paper and
check the print head nozzles" on this sheet.
Load paper and check the print
head nozzles
Before checking the print head nozzles, you need to load paper as shown
below. When loading the paper, make sure that the paper stack fits under
the tabs inside the edge guides and does not exceed the loading limit
indicated by the arrow mark on the left edge guide. To adjust the left edge
guide, hold down the locking tab and slide the guide against the paper stack.
Make sure that the position of the edge guide allows the paper to move up
and down freely.
Once paper is loaded, follow these steps to check the print head nozzles.
For Windows users
1. Click the Start button, point to Settings, and click Printers.
2. Select the icon for your printer, then
click Properties on the File menu.
Then click the Utility tab.
3. Click the Nozzle Check button, and
follow the on-screen instructions.
4. When you are finished, click OK to
close the Properties dialog box.
Your printer is now set up and ready to
use.
For Macintosh users
1. Select Page Setup in the Finder’s File menu.
2.
Click the utility icon.
3. Click the Nozzle Check
button, and follow the
on-screen instructions.
4. When you are finished,
click OK to close the utility
dialog box. Then click OK
to close the Page Setup
dialog box.
Your printer is now set up and ready to use.
The contents may vary in certain locations.
Power cord may come
attached in some countries.
Setup
Quick Guide
Store the protective materials in
case you want to ship the printer
in the future.
paper support
printer cover
output tray
ink cartridge clamps
Do not touch this part.
left edge guide
locking tab
output tray extension
tab
printable side up
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for
use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other
printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as
a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to
this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION's operating
and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any
options or any consumable products other than those designated as Original EPSON Products or EPSON
Approved Products by SEIKO EPSON CORPORATION. SEIKO EPSON CORPORATION shall not be held
liable for any damage resulting from electromagnetic interference that occurs from the use of any interface
cables other than those designated as EPSON Approved Products by SEIKO EPSON CORPORATION.
EPSON is a registered trademark and EPSON Stylus is a trademark of SEIKO EPSON CORPORATION.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. EPSON disclaims any and all rights in those marks.
Print quality is determined by the driver settings and the paper. See the online Reference Guide for details on driver settings and available media. Also visit the EPSON Web Site for the latest information.
Read this side first!
Setup
Read the Safety Instructions on the back of this sheet when setting up and
using this printer.
English
Color Ink Jet Printer
w
Warnings must be followed
carefully to avoid bodily injury.
c
Cautions must be observed to
avoid damage to your
equipment.
Notes contain important information
and useful tips on the operation of your
printer.
Warnings, Cautions, and Notes
4014094-00
X00
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson STYLUS C60 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson STYLUS C60 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info