708667
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
directly above a heat source, (e.g. fire, radiator, boiler, etc). Where possible, mount the detector in the
corner of the room so that the logical path of an intruder would cut across the fan detection pattern.
PIR detectors respond more effectively to movement across the device than to movement directly
towards it. Where possible, mount the detector in the corner of the room so that the logical path of an
intruder would cut across the fan detection pattern.
A
Less Sensitive More Sensitive A 1=6, 2=9,3=12m
Carefully drill out the required mounting holes in the rear cover; A. Using the rear cover as a template,
mark the positions of the fixing holes on the wall. Fix the rear cover to the wall. Detection area is
adjustable up to 12 meter; you can move the PCB up or down. Check again if Dip 4 of SW3(dipswitch
1-5) in Off. In test mode the PIR will send after every trigger a signal. In the regular mode the PIR will
pause 2 minutes, and then send again a signal after being triggered, to save batteries.
Programming the Alarm Panel:
We advise to do the programming before mounting the Alarm Panel. First we change from the Walk Test
mode to the Program/Install mode. Press until you see in the display: DISARM READYand the
time! Now we go into the Program/Install mode; mentioned further Inst. mode:
Press , 1 2 3 4 (1 2 3 4 standard Master Password), display show 1.USER SETUP.
First we will change the Master Password! Press : 1-1 USER 1 SETUP. Press
display: 1-7 MASTER SETUP, Press , display: :1 Password 1234 , Press , display:
Enter Password Code: NOW PRESS YOUR NEW CODE! and , display: :1 Password ???? .
Check if ???? is the password you entered. If ok, press 2x ,display: 1. USER SETUP, Press
display: 1-1 USER 1 SETUP, Press , display: :1 Password. Press , display: Enter
Password Code: NOW PRESS THE CODE FOR USER 1 and , display : will show the
Password you entered, CHECK! After the password
Next step is that we define some standard settings, per sensor ; press until you see in the
display:
1. USER SETUP. Press ,until in display: 3. ZONE SETTING. No we can choose:
Zone Setup (Z1-10) ; fill in the Zone Number you defined in the sensors!
Select all the zones you defined in the sensors!
Name
No Name
You can select a room name, or leave ‘no name’
Type
Intruder
Normal sensor will be ‘intruder’.
Final Exit
OFF
‘OFF’
Chime
OFF
‘OFF’
Entry Delay Zone 1
Zone 2-10
ON, 30s
OFF
Depends if you have to pass the
when you leave, or come back!
Part-Arm 1
OFF
Do you want switch this sensor on in PARM1
Part-Arm 2
OFF
Do you want switch this sensor on in PARM2
Walk Through
OFF
‘OFF’
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Elro-AP5500---Pro-Alarm-System

Zoeken resetten

  • alarm memory lampje brand en piept, hoe kan ik dit oplossen?? Gesteld op 16-4-2024 om 17:14

    Reageer op deze vraag Misbruik melden
  • Het betreft de Elro AP5500, het alarm memory lichtje blijft knipperen en het apparaat geeft regelmatig een piep toon, Het apparaat al gereset , via de sleutel, code, rondje en kruisje. Dan verdwijnt het ongeveer 5 minuten en het begint daarna weer te knipperen enz,. Wat is de oplossing? Gesteld op 29-1-2022 om 11:27

    Reageer op deze vraag Misbruik melden
  • Op mijn installatie knippert regelmatig het Led Status lampje. Weet iemand hoe ik dit uit kan zetten of wat dit betekent?. Het systeem functioneert overigens prima. Gesteld op 17-12-2021 om 16:11

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro AP5500 - Pro Alarm System bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro AP5500 - Pro Alarm System in de taal/talen: Engels als bijlage per email.

De handleiding is 1,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Elro AP5500 - Pro Alarm System

Elro AP5500 - Pro Alarm System Snelstart handleiding - Nederlands - 8 pagina's

Elro AP5500 - Pro Alarm System Gebruiksaanwijzing - Nederlands - 42 pagina's

Elro AP5500 - Pro Alarm System Snelstart handleiding - Deutsch - 10 pagina's

Elro AP5500 - Pro Alarm System Gebruiksaanwijzing - English - 49 pagina's

Elro AP5500 - Pro Alarm System Snelstart handleiding - Français - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info