574748
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Whirlpool is a registered trademark of Whirlpool USA
4000 107 24361
Load the laundry, close the door and add detergent as indicated
on the front page and as described in the chapter “Detergent and
Additives” in your Instructions for Use.
Turn the programme selector to the desired programme and
temperature.
The display shows the programme duration and the predefined
spin speed. The “Start/Pause” indicator blinks.
The washing machine is designed to save energy, therefore, if
you have selected a programme but do not start it within about
a quarter of an hour, it will switch off automatically.
To switch it on again, turn the programme selector toOff/O and
then to the desired programme again.
Push the button of any option desired - the indicator lights up.
If the combination programme/option or option/option is not
possible, the indicator switches off automatically.
Colours 15° button
Saves energy used for water heating while maintaining a
good wash result.
Supports colour maintenance when washing coloured laundry.
Recommendable for lightly soiled laundry without stains.
Make sure that your detergent is suitable for cold wash
temperatures (15 or 20°C).
Not selectable for Cotton 95 °C.
“Rapid” button
Enables quicker washing by shortening the programme duration.
Recommendable for only lightly soiled laundry.
Not selectable for Cotton 95 °C.
“Clean +” button
Choose this option if you use an in-wash additive for stain
removal (powder, for example “Vanish”) - it will optimize the
additives efficiency to get better wash performance and
stain removal.
Use with maximum load.
Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturers dosing instructions.
May prolong the programme by up to 15 minutes.
Appropriate for use of stain removers and bleaches on oxygen
basis. Chlorine or perborate bleaches must not be used!
“Prewash” button
Adds a prewash cycle to the wash programme selected;
prolongs the programme by about a quarter of an hour.
Recommended for heavily soiled laundry (e.g. with sand or
granular dirt).
Do not use liquid detergent for the main wash when
selecting “Prewash”.
“Intensive rinse” button
More water is added and rinse cycle is prolonged.
Particularly suitable for areas with very soft water, washing
baby linen and helping people with allergies.
“Easy ironing” button
Reduces creasing by an increased water quantity and a very
gentle spin.
CONSUMPTION DATA
Power consumption: in off-mode 0.16 W / in left-on mode 0.16 W.
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
Approximate remaining moisture
content (%) ****
without “Rapid” with “Rapid”
1000 rpm
RMC C
1200 rpm
RMC B
1400 rpm
RMC B
Mixed 40 4.0 46 0.40 1:00 68 59 55
Cotton 95 6.0 74** 2.20 2:40 68 59 55
Cotton 60 6.0 50 1.10 2:20 1:45 68 59 55
Cotton 40 6.0 64 0.70 2:05 1:15 68 59 55
Synthetics 40 3.0 42 0.40 1:20 0:55 45 40 35
Delicates 30 1.5 60 0.40 0:46
Wool/Handwash 40 1.0 45 0.55 0:40
White 60 6.0 66 1.34 2:37
Light colours 40 4.0 50 0.45 1:20
Dark 30 4.0 40 0.43 1:40 1:15
Cotton *
60 6.0 41 0.86 4:00 625353
Cotton *
60 3.0 30 0.57 3:00*** 625353
Cotton *
40 3.0 30 0.55 3:00*** 625353
Speed 15 30 3.0 20 0.15 0:15
Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual
water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.
15 °C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water
supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature.
Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options
or changing the spin speed will also change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.
*** Automatic adaptation of programme duration after detection of wash load.
**** After programme end and spinning with maximum selectable spin speed, in default programme setting.
* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.
LOAD LAUNDRY, ADD DETERGENT AND
SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
“Rinse hold” button
The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
Particularly useful if you want to postpone spinning to a later
time, or if you want to drain only.
The programme stops to “Rinse hold” at the time the “Rinse
hold” indicator on the display blinks. The “Start/Pause”
indicator blinks as well.
Terminate the “Rinse hold” option :
Press the “Start/Pause” button ; the programme will
terminate automatically with the final spin cycle for the
present wash programme.
If you do not wish to spin the clothes, turn the programme
selector to the “Drain” programme and press the “Start/
Pause” button to start draining.
“Spin” button
Every programme has a predefined spin speed; press the
button to set another spin speed.
If spin speed “0” is selected, the final spinning is cancelled
and the water is drained only. However, intermediate spin
phases remain during rinse.
With this function you can postpone your programme to
complete at a later time: press the button to select in how many
hours the programme shall be finished. Thus, it allows you to
have your laundry ready at a particular time and to profit from
more favourable energy rates during the night, for example.
Do not use liquid detergent when activating the “Cycle end”
button.
The time until the cycle end can be selected in full hour time
segments (1 to 24 h). When you press the button, the shortest
possible time will be displayed; keep on pressing the button to
loop through all the available times. To remove it again, keep
on pressing the button until you see the value “0:00”.
When you have selected the desired time until the cycle end,
press “Start/Pause” - the countdown will begin.
During the countdown, you can still modify the programme
setting (select or deselect options, change spin speed etc.).
If the modifications prolong the programme duration so that
it overruns the originally set time until the cycle end, the
programme will start immediately.
Sometimes the programme may finish before the selected
time until the cycle end has expired (e.g. for small loads).
In this case, the washing machine will tumble the laundry
regularly to keep it fresh, until the selected “Cycle end” time
has expired. During tumbling, the display will show an
animation. The tumbling phase can be stopped at any time
either by pressing any button or by rotating the programme
selector; the animation will stop and the door will unlock in
about 1 minute as indicated on the display.
The “Eco monitor” gives you a rough feedback about the power
consumption of the programme setting you selected.
As soon as you turn the programme selector to any programme,
the “Eco monitor” is on.
The indicator on the left is to show that the “Eco monitor”
is active. The four indicators next to it show the degree of
consumption: the less power your programme setting is
forecasted to consume, the less indicators will light up.
This depends on the programme, temperature and options
selected, and also on the size of the wash load. For that reason,
the forecasted degree of power consumption may adapt when
the washing machine detects the wash load.
Open the water tap and press the “Start/Pause” button .
The “Start/Pause” indicator lights up.
When the laundry load is detected or the programme duration is
updated, an animation appears on the display.
Before starting and after end of a programme, the indicator lights to
show that the door can be opened.
As long as a wash programme is running, the door remains locked
and must on no account be forced open. In case you have an urgent
need to open it during a running programme, refer to “Reset a
running programme”.
If one of the failure indicators blinks, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Water tap closed”: no or not sufficient inlet water.
“Service”: failure or malfunction of an electrical component.
“Clean pump”: waste water is not pumped out.
Spin speed blinks: unbalance during spinning.
The “Door open” indicator lights up, and the display
shows “End”. After about a quarter of an hour, the washing
machine will switch off completely to save energy.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the “Start/Pause” button to pause the
programme. The indicator blinks.
2. Select the new programme and, if you want, another spin
speed and any options.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
The “Reset” button cancels a programme before the end.
•Press and hold the “Reset” button for a few seconds.
The water is drained. It may last some time until the door
can be opened.
SET CYCLE END
ECO MONITOR
less more
PROGRAMME START
“DOOR OPEN” INDICATOR
FAILURE INDICATORS
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
RESET A RUNNING PROGRAMME
- the sensor technology adapts drum movement, water, energy and programme duration to your wash load
2

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Whirlpool-AWO-164U2---6TH-SENSE

Zoeken resetten

  • De deur staat open en ik krijg deze niet meer dicht. Waarschijnlijk heeft onze jongste in het slot gefriemeld met een schroef. Gesteld op 24-3-2023 om 14:07

    Reageer op deze vraag Misbruik melden
  • Beste. Mijn whirpool wasmachine heeft de foutmelding f18. Heb al de filter gekuist maar dit komt ernog altijd op. Iemand enig idee wat ik nog kan doen? Gesteld op 23-2-2023 om 21:38

    Reageer op deze vraag Misbruik melden
  • hoe krijg ik mijn wasmachine FFD11469EBV deur open na automatische vergrendeling Gesteld op 3-1-2023 om 07:39

    Reageer op deze vraag Misbruik melden
  • en plots is het programma "gemende was" weg en vervangen door "eco katoen",dit programma nu 2x...
    weet iemand hier raad mee? Gesteld op 1-11-2022 om 11:27

    Reageer op deze vraag Misbruik melden
  • Beste,
    Mijn startknop werkt niet meer..Jan ik deze zelf vervangen..mvg Gesteld op 29-5-2022 om 21:15

    Reageer op deze vraag Misbruik melden
  • Ik zet mijn wasmachine aan maar geeft geen water geeft dan water kraan dicht aan Gesteld op 16-1-2022 om 11:36

    Reageer op deze vraag Misbruik melden
  • 6
  • mijn wasmachine wil niet meer centrifugeren en afpompen Gesteld op 29-11-2021 om 10:31

    Reageer op deze vraag Misbruik melden
  • Ecomonitor indicatie brand op het eind.
    Moet ik resetten? Gesteld op 22-9-2021 om 16:15

    Reageer op deze vraag Misbruik melden
  • Ik krijg de gevaren driehoek en krijg dit niet weg ? Gesteld op 6-5-2021 om 20:14

    Reageer op deze vraag Misbruik melden
  • Beste,

    Gisteren weekte de machine nog, nu brandt GEEN ENKEL lampje. Stopcontact is OK, kinderbeveiliging is 3sec ingedrukt, dubbel uitgevoerd omdat ik niets kan zien, omdat er geen enkel controlelampje brandt.

    Raar. Kan er iemand een tip geven ? Alvast bedankt.
    Luc

    Gesteld op 17-10-2020 om 15:44

    Reageer op deze vraag Misbruik melden
  • Wasverzachter spoelt niet door. Ligt aan de gaatjes boven het bakje. Hoe krijg ik de gaatjes terug open? Gesteld op 10-6-2020 om 09:48

    Reageer op deze vraag Misbruik melden
  • Beste.
    In De startknop is iets afgebroken waardoor deze niet meer kan aanklikken. Hoe kan ik de machine aanzetten. De startknop zit los Gesteld op 25-5-2020 om 20:21

    Reageer op deze vraag Misbruik melden
  • 12
  • Beste,

    Hoe kan ik wasgoed instellen op 95 graden? Ik vind nergens in we gebruiksaanwijzing of op de machine zelf de keuze hiervoor.

    Mvg,
    Inge Gesteld op 13-1-2020 om 06:44

    Reageer op deze vraag Misbruik melden
  • ik krijg de startknop niet meer ingedrukt, geeft precies geen contact meer alhoewel ik het programma kan kiezen. Gesteld op 11-7-2019 om 09:26

    Reageer op deze vraag Misbruik melden
  • kan mijn programma niet aanpassen,zou op 90°willen wassen ,maar het hoogst staat ingesteld op 60°,hoe kan ik de graden aanpassen? Gesteld op 11-7-2017 om 11:30

    Reageer op deze vraag Misbruik melden
  • wasmachine stopt naar een paar minuten en dan knipperen de letters F H Gesteld op 23-10-2016 om 16:24

    Reageer op deze vraag Misbruik melden
  • Ik heb een probleempje met mijn wasmachien, als ik die opstart werkt die gewoon goed maar op een gegeven moment stopt die en dan brand er een lichtje onder het kraansymbool aan de linkerkant.
    Wat moet ik nu doen ?
    Alvast bedankt! Gesteld op 14-7-2015 om 00:10

    Reageer op deze vraag Misbruik melden
    • NL 5
      AFVOEREN VAN RESTWATER/REINIGEN VAN HET FILTER
      Controleer en reinig het ?lter regelmatig, tenminste
      twee of drie keer per jaar, vooral:
      • Als het indicatielampje “Reinig pomp” brandt.
      • Als het apparaat niet goed afpompt of als het niet
      centrifugeert.
      • Als de wasmachine in een ruimte staat waar het
      kan vriezen, moet u het restwater na elke wasbeurt
      afvoeren om schade te voorkomen.
      BELANGRIJK: laat het water afkoelen voordat u
      het afvoert uit het apparaat.
      1. Schakel de machine uit en trek de stekker uit het
      stopcontact.
      2. Openen van de plint (afhankelijk van het model):
      - Duw de lipjes rechts en links in (indien
      aanwezig) om de plint los te maken en verwijder
      deze (afb. 3).
      - Verwijder de plint met behulp van de sifon van
      de wasmiddeldispenser: duw een kant van de
      plint met de hand omlaag, duw de punt van
      de sifon in de ruimte tussen de plint en het
      voorpaneel en wrik de plint open (afb. 4).
      - Voor inbouwbare modellen: verwijder de sokkel
      van het keukenaanrecht.
      3. Zet een bak bij de wasmachine.
      4. Als uw wasmachine een noodslang heeft: Maak de
      noodslag los uit de klemmen en trek de noodslang
      uit de onderkant van de wasmachine (afhankelijk
      van het model). Als er geen noodslang is: zet een
      brede, lage bak onder het ?lter (afb. 6). Sla de
      stappen 5-8 over en ga door met 9.
      5. Houd het uiteinde van de noodslang in de bak en
      verwijder de stop (afb. 5).
      6. Wacht tot al het water in de bak is gestroomd en
      plaats de stop terug op de slang (afb. 7).
      7. Maak de noodslang weer vast aan de klem of duw
      hem terug in de onderkant van de wasmachine
      (afhankelijk van het model).
      8. Leg een absorberende katoenen doek (b.v. een
      handdoek) op de vloer voor het ?lter.
      9. Slowly open the ?lter by turning it counter-clockwise
      (afb. 8); wacht tot al het water weggestroomd is,
      draai het ?lter daarna helemaal los en haal het
      eruit.
      10. Alleen voor het wegpompen van restwater
      (vrijstaande modellen): kantel het apparaat
      voorzichtig voorover (met de hulp van een tweede
      persoon) en laat al het water naar buiten stromen.
      11. Alleen voor de ?lterreiniging: reinig het ?lter en de
      ?lterkamer; controleer of de rotor van de pomp in
      de ?lterbehuizing weer goed kan bewegen.
      12. Plaats het ?lter terug en schroef het zover mogelijk
      naar rechts.
      13. Giet ca. 1 liter water in de wasmiddellade om het
      “Eco-systeem” weer in te schakelen. Controleer of
      het ?lter goed geplaatst en aangedraaid is en er
      geen water naar buiten komt.
      14. Installeer de plint weer (afb. 9); kantel de
      wasmachine indien nodig licht naar achteren om
      dit te doen (vraag hierbij hulp aan een tweede
      persoon). Voor inbouwbare modellen: monteer de
      sokkel terug in het keukenaanrecht.
      15. Steek de stekker in het stopcontact. De
      wasmachine is nu weer klaar voor gebruik. Geantwoord op 31-7-2016 om 16:16

      Waardeer dit antwoord (2) Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool AWO 164U2 - 6TH SENSE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool AWO 164U2 - 6TH SENSE in de taal/talen: Engels als bijlage per email.

De handleiding is 2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Whirlpool AWO 164U2 - 6TH SENSE

Whirlpool AWO 164U2 - 6TH SENSE Gebruiksaanwijzing - Nederlands - 12 pagina's

Whirlpool AWO 164U2 - 6TH SENSE Snelstart handleiding - Nederlands - 2 pagina's

Whirlpool AWO 164U2 - 6TH SENSE Gebruiksaanwijzing - Deutsch - 12 pagina's

Whirlpool AWO 164U2 - 6TH SENSE Snelstart handleiding - Deutsch - 2 pagina's

Whirlpool AWO 164U2 - 6TH SENSE Gebruiksaanwijzing - English - 15 pagina's

Whirlpool AWO 164U2 - 6TH SENSE Gebruiksaanwijzing - Français - 12 pagina's

Whirlpool AWO 164U2 - 6TH SENSE Snelstart handleiding - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info