576429
1
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
-1-

TI-10
Calculator and Arithmetic Trainer
Copyright
2001, 2002 Texas Instruments Incorporated
General Information
The TI-10 has two power sources — battery and solar. It
operates in well-lit areas using the solar cell, and it operates
in other light settings using the battery.
Examples
: See the “Examples” page for problems with
keystroke sequences that demonstrate many of TI-10
functions and capabilities. Before starting each problem set,
reset and clear the TI-10 by pressing
b”
. This helps to
ensure that your displays are the same as those shown in
the examples. In Problem Solving
AUTO
mode, however,
displays will vary from those shown in the examples
because the problems presented by the TI-10 are random.
On/Off
To turn the TI-10 on, press
.
If the TI-10 is on, press
to turn it off.
If you do not press any keys for about five minutes, the
Automatic Power Down™ (APD™) feature turns off the
TI-10 automatically. After APD, press
to power up again.
The display, all pending operations, settings, and memory
(including history) are retained.
Two-Line Display and Scrolling
"!
#
$
The TI-10 has a two-line display that shows up to 11
characters at a time on each line. Entries that do not fit on
the first line wrap to the second. When the second line is
filled, the characters scroll up.
Entries can be up to 88 characters.
Exceptions
: For
Op1
(Stored Operation), the limit is 44 characters. For
(Problem Solving)
MAN
(manual) mode, entries do not
wrap; entries cannot exceed 11 characters.
When a result exceeds the capacity of the display, it is
shown in scientific notation. However, if the result is greater
than 10
99
, an
OVERFLOW ERROR
is displayed; if the result
is less than 10
L
99
, an
UNDERFLOW ERROR
is displayed.
Scroll using these keys:
"
,
!
,
#
, and
$
.
¦
Press
"
and
!
to scroll through entries or to move the
underline from one item to another within a menu.
¦
Press
#
and
$
to scroll through history or to move between
menus when the menus are displayed.
Clearing, Correcting, and Resetting
w
w
Deletes the character to the left of the
cursor.
Only clears the display and error condition.
Does not clear value from memory, mode
settings, etc.
|
|
Clears the value from memory.
b
Resets the TI-10 clearing the calculator
completely and restoring all default
settings.
MEM CLEARED
is displayed.
Press
to clear the display.
You can also reset by:
¦
Using the
RESET
menu. See
Calculator/Problem Solving menus.
¦
Pressing
and
simultaneously.
Display Indicators
Indicator Definition
TI-10 is in the Problem Solving tool.
ƒ
TI-10 is in the Place Value feature.
Fix
TI-10 is rounding results.
M
A value other than zero is in memory.
Op1
Stored operation is active.
Auto
Problem Solving (
) is in
AUTO
(automatic)
mode.
.
P
When using
W
, result will be displayed in
decimal format.
y
z
More entry history or menus are available.
Press
#
(up) or
$
(down) to access.
w
x
An entry extends beyond the capacity of the
display. Press
!
or
"
to scroll.
Calculator / Problem Solving Menus
Press Calculator Tool
$
$$
$$$
QR
Ù
(Division result format)
+ 1
?
(Show or hide
OP
)
Y
n
(Clear stored operation)
n
Y
(Reject or select
RESET
)
Press Problem Solving Tool (AUTO)
‡
‡
$
‡
$$
AUTO
MAN
(Automatic or Manual)
1
2 3
(Level of Difficulty)
+
-
Q
P
?
(Type of Operation)
Press Problem Solving Tool (MAN)
‡"®
‡"®$
AUTO MAN
(Automatic or Manual)
11 -.
- 1 -.
(Place Value feature)
Once in a menu:
¦
To underline a menu item, press
!
or
"
.
¦
To select the underlined item, press
®
.
¦
To exit a menu, press
.
Note:
To select an option from the Place Value menu, the
TI-10 must be in
(Problem Solving)
MAN
(manual)
mode.
Pressing
while in the
(Problem Solving) tool
temporarily displays the Scoreboard before the
AUTO /
MAN
menu is displayed.
Order of Operations
The TI-10 uses the Equation Operating System (EOS
é
) to
evaluate expressions.
1st Expressions inside parentheses.
2nd Functions that require a closing parenthesis ) and
precede the argument.
3rd Negation (
N
).
4th Multiplication, implied multiplication, division.
5th Addition and subtraction.
6th
Z
completes all operations.
Basic Arithmetic
T
U
V
W
r
M
X
Y
Z
q
,
h
,
i
,
j
,
k
,
l
,
m
,
n
,
o
,
p
Enters the numerals 0 through 9.
T
,
U
,
V
,
W
Adds, subtracts, multiplies, divides.
r
Inserts a decimal point.
M
Enters a negative sign. (Does not act as
an operator.)
X
,
Y
Opens, closes a parenthetical
expression.
Z
Completes all operations.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Texas-Instruments-TI-83

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Texas Instruments TI-83 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Texas Instruments TI-83 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,09 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Texas Instruments TI-83

Texas Instruments TI-83 Gebruiksaanwijzing - Deutsch - 490 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info