559631
3
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
0504
reebokfitnessequipment.com
4. During these programs the speed and incline settings are split into 20 segments. The time of each
segment depends on the overall time selected. For example a 20 minute program = 20 segments of
1 minute. Therefore the speed/incline would alter every 1 minute. Times will differ to allow for warm up
and cool down.
5. The console will count down and beep for 3 seconds each time the speed/incline is changed.
U01-U03 User Defined Programs
Within these programs the user can define the speed and incline for a personal workout.
1. From standby screen press PROGRAM button until U01, U02 or U03 is displayed.
2. Press MODE to enter the first segment of the program.
3. Press SPEED +/- to adjust the speed and INCLINE +/- to adjust incline for this segment and press
MODE to continue.
4. Repeat above for all 20 segments of the program.
5. Once the data is entered for all segments press START to begin.
When inputted the program will be saved within the selected user number (U01, U02 or U03).
Body Fat Function
1. Press PROGRAM button until Body Fat Function is displayed.
2. The SPEED window will display the preset program (F1-F5),TIME window will display the input data.
3. Press mode to select the required program.
4. The PULSE/INCLINE window will display the program parameters, press SPEED + or – to change this
and press MODE to confirm.
5. F1 – gender will be displayed. Press SPEED +/- to switch between 1 (male) and 2 (female).
Press MODE to confirm.
6. F2 – age will be displayed. Press INCLINE +/- to adjust (preset is 25 years, preset range 10-99years)).
Press MODE to confirm.
7. F3 – Height will be displayed. Press INCLINE +/- to adjust (preset is 170cm, preset range 100-200cm).
Press mode to confirm.
8. F4 – Weight will be displayed. Press INCLINE +/- to adjust (preset is 70kg, preset range 20-150kg).
Press MODE to confirm.
9. F5 will be displayed. At this stage the user information has been stored. Place both hands on the
pulse sensors for approximately 2-3 seconds. The test results will then be displayed as below:
19 or below Underweight
20-25 Normal Weight
25-29 Overweight
30 or above Obese
Note All readings given are a guideline only and not to be used as a medical device.
Mph to kph conversion
The Speed and distance can be set to operate in MPH or KPH
To switch between these:
1. Remove the SAFETY KEY, the computer will display ”---”
2. Press and hold PROGRAM and MODE buttons together for 6 -7 seconds
3. The console will change from MPH to KPH automatically, speed window will show”0.6” stand for MPH
“1.0” stands for KPH
Console User Guide
ZR8 Treadmill
HANDLEBAR CONTROLS
Speed +/-
Located on the right hand side handlebar the SPEED + or – buttons can be pressed to
change the running speed at any time during a program.
Incline +/-
Located on the left hand side handlebar the INCLINE + or – buttons can be pressed to change the incline
level of the running deck at any time during a program.
Pulse grips
There are pulse sensors located on both handlebars. In order to monitor the users pulse rate these can be
held during workout. Please note both sensors must be held in order for the reading to be given. The pulse
monitor is a guide for reference only and not for medical use or monitoring.
COMPUTER PROGRAMS
Manual mode includes normal mode, time, calories and distance countdown mode
P0
Manual mode
M1-M3 Time, distance and calories countdown mode
P1-P24 Preset workout programs
U01-U03 User defined programs
FAT Body fat functions
P0 Manual Program
Normal mode
1. From Standby press START to begin manual mode immediately.
2. Treadmill speed and incline can be manually adjusted by using the SPEED+/- or INCLINE +/- buttons at
any time during a workout.
3. Press STOP button can stop the working of the motor.
4. Take off the safety key also can stop the working of the motor.
Time, Distance and Calories countdown mode
1. From standby press MODE to select time distance and calories, Once selected use INCLINE +/- to alter
the required setting and press START to begin.
2. The TIME, DISTANCE or CALORIES will count down from the selection.
3. Once the countdown has completed the computer will beep to indicate the end of the program and
speed window will show ”End”, after 5 seconds the computer will beep and all the setting reserve
to zero.
P01-P24 Programs
These are preset programs in which the machines speed or incline will be changed automatically
during a workout.
Note: If speed/incline is altered by the user during these programs it will revert back to the preset
speed/incline at the next segment of the program.
1. From standby screen, Press program button to select required program, or use speed+/- to choose
program during program.
2. Press START to select and begin using the preset time.
3. The default workout time for these programs is 30 minutes. This can be altered by pressing INCLINE +/-
buttons before START is selected.
Programs and Functions
ZR8 Treadmill
RFE 5073_ZR8ConsoleManual_ALL LANG.indd 4-5 10/07/2012 14:28
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Reebok ZR8 Treadmill bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Reebok ZR8 Treadmill in de taal/talen: Engels als bijlage per email.

De handleiding is 6,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Reebok ZR8 Treadmill

Reebok ZR8 Treadmill Installatiehandleiding - English - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info