593912
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
S3
S3
CHARACT E R I S T I C S
1. Analogue & d igital time displays: Hour,
Minute, Second, Month, Date and day of the
week.
2. Automatic calendar:
The calendar automati-
cally adjusts the dates and months from the
year of 2000 to 2049.
3. Daily alarm and hourly chime:
The alarm
can be set to sound at the designated time
on a 24-hour basis and the chime can be set
to sound every hour on the hour with a single
beep.
4. Second time zone: Time in a different time
zone can be displayed.
5. Countdown timer:
The countdown timer can
be set up to 23 hours 59 minutes and 59 sec-
onds.
6. St o pwa tch:
The sto pwatch c an measure
up to 23 hours 59 minutes and 59 seconds in
1/100-second increments. Split time measure-
ment is available.
7. Selection of 12 or 24-hour format: The time
display format in either 12-hour indication or
24-hour indication can be selected.
8. Animation dots are displayed:
Animation
dots are displayed in both 12 and 24-hour for-
mat and can be selected in either fast flashing
or slow flashing.
9. EL backlight: The built-in electro-luminescent
(EL) backlight illuminates the display for easy
viewing in darkness.
L C D D I S P L AY A N D B U T T O N S
F U N C T I O N
H O W T O S E T N O R M A L T I M E /
C A L E N D A R
H O W T O S E T A L A R M T I M E
* P r e s s S 1 o r S 2 t o
switch from fast to
slow flashing.
(fast
 
slow)
* Press any key to
switch
from slow to
fast flashing.
(slow
 
fast)
1.
Press S3 button to show the NORMAL TIME
mode.
2. Press S4 button to begin setting procedure.
The seconds digit starts flashing.
3. Press S1 button to set SECONDS setting.
4. Press S3 button to move on to HOURS setting.
* Selection of the digits to be adjusted is made
in the following order by pressing S3 button
and then pressing S1 button.
5. Press S3 button after completing the setting.
NREZ012
10-2010
CAL. Z012 (R23 SERIES)
H O W T O C H A N G E T H E D I S P L A Y
M O D E
* Animation dots are displayed in both 12 and
24-hour format.
S E T T I N G T H E T I M E ( A N A L O G U E )
1. Pull the crown out one step, the second hand
will stop.
2. Set the correct time by turning the crown.
3. Push the crown back to the original position.
The watch will start running again.
* The analogue indication and digital display of
the time setting can be adjusted separately.
- Multi-function digital watch with 12 or 24
animation dots.
S T m e a n s
Stopwatch”
1. From NORMAL TIME mode,
press S3 button
once into ALARM mode.
2. Press S4 button to begin setting procedure.
The hours digit starts flashing.
3. Press S1 button to set HOURS setting.
4. Press S3 button to move on to MINUTES setting.
* Selection of the digits to be adjusted is made
in the following order by pressing S3 button
and then pressing S1 button.
5.
Press S3 button after completing the setting.
*
Press S3 button to show the
NORMAL TIME
mode.
* If the NORMAL TIME mode is shown already on
the display, skip the above operation.
*
Press S3 button to change the display mode in
the following order.
SECONDS
DATE
YEAR
12/ 2 4 -H O U R
FORMAT
MONTH
MINUTESHOURS
S3
S3
S3
S2
S3S3
* Day of week will change automatically based on
date changing.
----- means
Daily Alarm”
DATE
MONTH
MINUTES
HOURS
S3
S3
S3
S3
S4 (SET)
HOURS
DAY O F
WEEK
CHIME
SIGNAL
DATE
MINUTES
SECONDS
24HOUR
FORMAT
ALARM
SIGNAL
S3 (MODE)
S2 (RESET/
LIGHT)
ANIMAT I O N D OT S
MONTH
S1 (STA R T / S TO P )
S2
S1
S4
S3 S2
S1
CROWN
NORMAL TIME
MINUTES SETTING BY
PRESSING S1
HOURS SETTING BY
PRESSING S1
SECONDS SETTING
BY PRESSING S1
S4
S3
S3
S3
YEAR SETTING BY
PRESSING S1
S3
MONTH SETTING BY
PRESSING S1
DATE SETTING BY
PRESSING S1
S3
12/24-HOUR
FORMAT
S3
NORMAL TIME
DT”means
“Dual Time”
S3
AL means
“Daily Alarm
TR” means
Timer”
S3
S3
S3
S3
ALARM MODE
S4
HOURS SETTING BY
PRESSING S1
MINUTES SETTING BY
PRESSING S1
S3
MONTH SETTING BY
PRESSING S1
DATE SETTING BY
PRESSING S1
Engagement/Disengagement of ALARM &
CHIME
* With each press of S2 button, the ALARM and
CHIME can be engaged or disengaged in
the following order. The ALARM signal and/or
CHIME signal appear or disappear on the dis-
play accordingly.
* The ALARM can be set only in one time zone.
* If month and date are set, it will alarm once.
S2
S2
S3
S3
S2
PRESS S3
1 T I M E
NORMAL TIME
The time display format in either 12-hour indi-
cation or in 24-hour indication can be selected
by pressing S2 button. Under the 12-hour indi-
cation format, no mark appears on the display.
Under the 24-hour indication format, -” mark
appears under the date indicator.
The calendar automatically adjusts the dates
and months from the year of 2000 up to 2049.
S3
PRESS S3
1 T I M E
NORMAL TIME
S2
ALARM ON
CHIME ON
ALARM/
CHIME ON
S2
RESET
12-hour 24-hour
S2
24-hour format indication
Selection of 12-hour/24-hour format
ALARM MODE
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Lorus-Z012

Zoeken resetten

  • Ik ben eens van de trap gevallen en na dat ik was gevallen is de analoge klok gestopt met werken. Nu vraag ik mij af of er een manier is dat ik hem terug kan laten werken of dat ik hem moet binnen doen.

    Mvg
    C. Gesteld op 3-1-2020 om 17:33

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lorus Z012 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lorus Z012 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info