593793
1
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
CHARACTERISTICS
1. Time:
Analogue display: Hour, minute and
second hands.
Digital display: Hour and minutes.
The digital time is displayed in the 24-
hour indication.
* Digital display is located at the 4 o’clock
side of the watch to provide easy view
when the watch is worn on the wrist.
2. Calendar: Month and date are shown in
the digital display.
The calendar adjusts automatically for odd
and even months except February of leap
years.
3. Dual time: Besides the time of your
area, time of an area in a different time
zone can be set. The calendar changes
correspondingly with the digital time.
4. Countdown timer: Up to 12 hours can
be set in minute increments.
As soon as the time is set for the timer, it
automatically starts counting down.
INSTRUCTION MANUAL
CAL. V52H (R23 SERIES)
06-98
NREV52H
DISPLAY AND CROWN/BUTTONS
Button B
Digital display
Button A
Hour hand Minute hand
Second
hand
Crown
Extended
position
Normal
position
The selection of the mode is made in the
following order with each press of button
“B”.
CALENDAR mode TIME mode
TIMER mode
B
B
B
HOW TO SET THE TIME
Note: The analogue hands move independently
of the digital time. When using the
watch, therefore, be sure to set both
the analogue time and digital time.
1. Pull out the crown when the second hand
is at the 12 o’clock position. The second
hand will stop on the spot.
2. Turn the crown to set the hour and minute
hands to the desired time.
* When setting the minute hand, first advance
it 4 to 5 minutes ahead of the desired
time and then turn it back to the exact
minute.
3. Push the crown back in to the normal position
in accordance with a time signal.
Normal
position
Extended
position
Crown
Analogue time setting
Hour
Minutes
1. Press button “B” to show the TIME mode.
2. Press button “A” for 2 seconds to show
the TIME SETTING display. The hour
digits start flashing.
3. Press button “B” to set the hour digits.
* The digital time is displayed only in the
24-hour indication.
4. Press button “A” to select the minute digits
(flashing).
5. Press button “B” to set the minute digits.
6. Press button “A” in accordance with a
time signal to return to the TIME mode.
The seconds are reset to “0” and start
immediately.
Note: The flashing digits move quickly by
keeping button “B” pressed.
Digital time setting
How to use the dual time
Equipped with two time displays, namely,
analogue and digital displays, the watch
can show the time of an area in a different
time zone besides the time of your area.
Method I :
Set the time of your area on the analogue
display while setting the time of an area in a
different time zone on the digital display.
Method II:
Set the time of your area on the digital display
while setting the time of an area in a different
time zone on the analogue display.
* For setting the analogue and digital times,
see “Analogue time setting” and “Digital
time setting”, respectively.
Note: The calendar changes correspondingly
with the digital time.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lorus V52H bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lorus V52H in de taal/talen: Engels als bijlage per email.

De handleiding is 0,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info