593765
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
CHARACTERISTICS
1. Analogue time display: Hour, minute and
second hands.
2. Digital time display: Hour, minute and
seconds.
3. Calendar display: Month, date and day
of the week.
Automatic calendar: Calendar adjusts
automatically for odd and even months
except February of leap years.
4. Time indication: Changeover between 12-
and 24-hour indications is possible.
5. Alarm: The alarm rings at the designated
time for 20 seconds.
6. Hourly time signal: Can be set to ring every
hour on the hour with a single “beep”.
7. Stopwatch: Measures up to 59 minutes and
59 seconds 99 in 1/100 second increments.
Split time measurement
8. Illuminating light: The light illuminates the
display for easy viewing in the dark.
4. Press button “A” to set the flashing digits.
One digit is advanced with each press of
button “A”. The flashing digits except the
seconds and 12-/24-hour indication move
quickly by keeping button “A” pressed.
5. After all the adjustments are completed,
press button “B” to return to the TIME mode.
Seconds setting
Press button “A” in accordance with a time
signal. The seconds are reset to “00” and
start immediately.
When the seconds count any number from
“30” to “59” and button “A” is pressed, one
minute is added and the seconds are
immediately reset to “00”.
Notes:
1. When setting the hour digits, check that
AM/PM is properly set. Only “PM” mark is
displayed. For the AM setting, there is no
indication.
2. When the time function is displayed in the
24-hour indication, the alarm will also be
displayed in the 24-hour indication.
3. If the watch is left untouched in the TIME
SETTING display with the digits flashing, it
will automatically return to the TIME mode
in 1 to 2 minutes.
HOW TO SET THE ANALOGUE TIME
Before setting the analogue time, be sure
to set the digital time.
(Refer to “HOW TO SET THE DIGITAL TIME”.)
1. Pull out the crown when the second hand
is at the 12 o’clock position. The second
hand will stop on the spot.
2. Turn the crown to set the hour and minute
hands to the desired time.
* When setting the minute hand, advance
it 4 to 5 minutes ahead of the time and
then turn it back to the exact minute.
3. Push the crown back in to the normal
position when the second digits count “00”
in the digital time display.
1. Press button “B” to show the ALARM mode.
2. Press button “C” to show the ALARM
SETTING display. The hour digits start
flashing.
3. Selection of the digits to be adjusted
(flashing) is made in the following order by
pressing button “C”.
Minutes
Hour ALARM mode
4. Press button “A” to set the flashing digits.
One digit is advanced with each press of
button “A”. The flashing digits move quickly
by keeping button “A” pressed.
5. After all the adjustments are completed,
press button “B” to return to the ALARM
mode.
1. Press button “B” to show the TIME mode.
2. Press button “C” for 2 to 3 seconds to show
the TIME SETTING display. The second digits
start flashing.
3. Selection of the digits to be adjusted
(flashing) is made in the following order by
pressing button “C”.
NREV071C
8-2011
CAL. V071 (RVR SERIES)
CAL. V072 (RBK SERIES)
Hour hand
Normal
position
Extended
position
Crown
Second hand
ALARM CHRONOGRAPH
PM
Minute hand
CALENDAR mode
ALARM mode
STOPWATCH mode
B
B
B
B
TIME mode
The selection of the mode is made in the
following order with each press of button “B”.
4. Press button “A” to set the flashing digits.
One digit is advanced with each press of
button “A”. They move quickly by keeping
button “A” pressed.
5. After all the adjustments are completed,
press button “B” to return to the CALENDAR
mode.
* If the watch is left untouched in the
CALENDAR SETTING display with the digits
flashing, it will automatically return to the
CALENDAR mode in 1 to 2 minutes.
Press for 2 to 3
seconds.
( )
Date
Month
Day
CALENDAR mode
P
M
HOW TO SET THE CALENDAR
A
Day of the week
C
B
Month
Date
1. Press button “B” to show the CALENDAR
mode.
2. Press button “C” for 2 to 3 seconds to show
the CALENDAR SETTING display. The date
digits start flashing.
3. Selection of the digits to be adjusted
(flashing) is made in the following order by
pressing button “C”.
HOW TO SET THE DIGITAL TIME
Hour
Minutes
Seconds
P
M
C
B
A
“PM” mark is displayed in the
12-hour indication.
“AM” mark is not displayed.
Seconds
( )
HOW TO SET THE ALARM
PM
C
B
A
Hour
Minutes
Alarm mark
“PM” mark is displayed in the
12-hour indication.
“AM” mark is not displayed.
Hourly time
signal mark
ALARM CHRONOGRAPH
P
M
Hour hand
Minute hand
Normal
position
Crown
Second
hand
Hour
Minutes
Seconds
“PM” mark is displayed in the
12-hour indication.
“AM” mark is not displayed.
Extended
position
C
B
A
DISPLAY AND CROWN / BUTTONS
Minutes
Hour
12- or 24-hour
indication
TIME mode
Press for 2 to 3
seconds.
P
M
PM
PM
PM
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lorus V071 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lorus V071 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Lorus V071

Lorus V071 Gebruiksaanwijzing - Nederlands - 18 pagina's

Lorus V071 Gebruiksaanwijzing - Deutsch - 18 pagina's

Lorus V071 Gebruiksaanwijzing - Français - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info