654775
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
CHARACTERISTICS
1. Time/Calendar Display: Hour, minute, second,
month, date and day of the week.
2. Time Indication: Choice of 12-hour display
format with PM indicator or 24-hour display
format is available.
3. Stopwatch: The stopwatch can measure up
to 23 hours 59 minutes and 59 seconds in 1/100-
second increments. Lap time measurement is
available.
4. Timer: The countdown timer can be set up to 23
hours 59 minutes and 59 seconds.
5. Daily Alarm: The alarm can be set to sound at
the designated time on a 24-hour basis.
6. Second Time Zone: Time in a different time zone
can be displayed.
7. Chime: The chime can be set to sound every
hour on the hour with a single beep.
8. Illuminating Light: The built-in electro-
luminescent (EL) light evenly illuminates the
display for easy viewing in darkness.
BUTTONS AND DISPLAYS
HOW TO SET THE TIME/CALENDAR
HOW TO USE THE STOPWATCH
1. From the NORMAL TIME mode, press
S2
once
to change the display to the TIME/CALENDAR
SETTING mode. (The second digits start flashing.)
2. <Second setting>
Press
S1
in accordance with a time signal.
The second digits are reset to“00” and start
counting immediately.
When the second digits count any number
from “30” to “59” and
S1
is pressed, one
minute is added and the seconds are
immediately reset to “00.
3. Press
S3
to confirm the second setting and move
on to the next item.
Selection of the item to be adjusted (flashing) is
made in the following order when
S3
is pressed.
*Choice of 12-Hour/24-Hour format
The time display format in either 12-hour
indication or in 24-hour indication can be
selected alternately by pressing
S1
. Under the
12-hour indication format, “PM” mark appears in
the afternoon, but no AM mark appears in the
morning. Under the 24-hour indication format,
no mark appears on the display.
* Measurement and release of lap times can be
repeated when
S2
is pressed.
* When
S2
is pressed, the display changes to show
the current lap time and total time from START for 3
seconds, and then it automatically returns to show
the ongoing measurement.
From the NORMAL TIME mode, press
S3
to go to the
STOPWATCH mode. The STOPWATCH mode indicator
“SP” appears on the display.
STOPWATCH OPERATION
Standard Measurement
Lap Time Measurement
Start
Lap 1
Last lap
Stop
S1
S2
S2
S2
S1
Lap 2
Reset
S2
S1
Start
Stop
Reset
S1
S2
(to its starting value)
NREZ017
3-2012
CAL. Z017 (R23 SERIES)
Press
S2
to reset the stopwatch.
Press
S3
to return to the NORMAL TIME mode.
4. To set the digits for each item, press
S1
. One digit
(flashing) is increased with each pressing of
S1
.
To move the digits quickly, keep
S1
pressed.
5. After all the adjustments are completed, press
S2
to return to the NORMAL TIME mode.
How to stop the alarm while sounding
The alarm sounds for 20 seconds at the designated
time. To stop it manually while sounding, press
S1
,
S2
or
S3.
Note: The alarm can be set only in one time
zone.
STOPWATCH
STOPWATCH mode indicator
STOP
LAP TIME DISPLAY
**Calendar display
To view the calendar (month and date), keep
pressing down
S1
in the NORMAL TIME mode.
*
“PM” mark
PM
SECOND
DAY OF THE WEEK
12/24-HOUR FORMAT
DATE
HOUR
MINUTE
S3
S3
S3
S3
S3
S3
MONTH
S3
HOW TO USE THE ALARM
From the NORMAL TIME mode, press
S3
twice to go
to the ALARM mode. The ALARM mode indicator
AL appears on the display.
1. Press
S2
to change the display to the ALARM
SETTING mode. The hour digits start flashing.
2. Press
S1
to set the hour digits. One digit (flashing)
is increased with each press of
S1
. To move the
digits quickly, keep
S1
pressed.
3. Press
S3
to confirm the hour setting and move
on to the minute setting. The minute digits start
flashing.
4. Press
S1
to set the minute digits. One digit
(flashing) is increased with each press of
S1
. To
move the digits quickly, keep
S1
pressed.
5. Press
S3
to confirm the minute setting and move
on to the time zone setting.
6. Press
S1
to select the time zone. Select “t1” for
alarm in the time zone 1, select “t2” for alarm in
the time zone 2. The alarm is available only in
one time zone.
7. Press
S2
to complete the alarm setting.
8. Press
S3
to return to the NORMAL TIME mode.
ENGAGEMENT/DISENGAGEMENT OF
THE ALARM & CHIME
1. From the NORMAL TIME mode, press
S3
twice to
go to the ALARM mode.
2. With each press of
S1
, the alarm and chime
can be engaged or disengaged in the following
order. The ALARM signal and/or CHIME signal
appear on the display accordingly.
3. Press
S3
to return to the NORMAL TIME mode.
ALARM mode indicator
CHIME signal
ALARM signal
**
To change the display mode, press S3. The display
mode changes in the following order.
STOPWATCH
NREZ017.indd 1 12/01/31 10:07
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Lorus R2353KX9 - CAL Z017 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Lorus R2353KX9 - CAL Z017 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Lorus R2353KX9 - CAL Z017

Lorus R2353KX9 - CAL Z017 Gebruiksaanwijzing - Nederlands - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info