Starting the machine
Before starting the machine for the
first time:
• The incoming power line must be
fitted with a 13 amp fuse.
• Insert the mains plug into the so-
cket.
• Check that the hygrostat (3) is set to
the required value.
You can adjust the drying level by chan-
ging the hygrostat (3) setting.
Each time before you start drying:
• Close doors and windows
• Switch the appliance on at the push-
button switch (1), the pushbutton
switch will illuminate blue.
The clothes drier works automatically,
i.e. as long as the humidity in the room
remains above the preset value, it
continues to operate. As soon as the
desired level of humidity is reached,
the dehumidifying function of the
dehumidifier stops. If the humidity level
in the room rises again, it automatically
begins to work again.
Each time after you have finished
drying:
• Switch the appliance off at the push-
button switch (1).
Cleaning
The refrigeration unit is hermetically
sealed and the fan bearings are pro-
vided with lifetime lubrication. These
parts are therefore maintenance-free.
• Wipe the housing with a damp
cloth.
• Take hold of the filter grips (2) at the
top of the front grill (4). Pull the filter
upward and remove.
• Remove dust from air filter using a
brush and replace
If it becomes particularly dirty, the inside
of the machine will need to be cleaned.
This must be performed by a refrigerati-
on specialist.
