464668
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
A. PROGRAMMING THE REMOTE CONTROL
Look up the relevant device codes in the code list included in these
operating instructions.
Press the SET button (9) and simultaneously one of the device
buttons (TV, VCR, DVD, AUD, CAB, SAT). Release both buttons
when the LED lights up.
Enter the four-digit number of your brand or model (indicated on
the code list).
Press the POWER button (2) on the remote control. If the code
was entered correctly, all functions can now be controlled with the
remote.
Note:
Some brands have more than just one code. If the device does not
respond to the first code, repeat steps 1-3 using another code. Test
all codes indicated for your brand or model. Select the code to which
the remote control responds correctly.
Press any button to finish programming.
Legend description:
Keep button pressed
Release button
NOTE:
a) Make sure that no step takes longer than 10 seconds. Otherwise
the programming will stop automatically.
b) There may also be codes which permit to control only some
commands using the remote (limited use). Therefore, it is
advisable to look up the code with which most or even all possible
functions can be controlled.
c) If no code from the code list leads to satisfying results, try using
the manual search run (see chapter B).
B. MANUAL SEARCH RUN
Start a manual search run if your device does not respond to the
remote, even though you have tried out all codes specified for your type
of device and brand.
1. Switch on the device that you want to operate. If you are looking for a
code for a VCR/CD/LD/DVD device, insert a videotape or a DVD/CD
and press “Play” before starting the search run.
2. Press the SET button and simultaneously one of the device
buttons (TV, VCR, DVD, AUDIO, CABLE, SAT) until the LED lights
up. Then release both buttons.
3. Press briefly the SET button once again. The LED starts to flash
and the manual search run is enabled.
4. On the remote control, press several times the POWER button
until the device that you want to operate is switched off (with VCR,
DVD, AUD: press the PLAY button instead of the POWER button).
If the device responds, proceed with the next step. If not, repeat
this step.
5. Check the functions of the device.
6. Press any device button to finish programming. The LED goes
out.
Legend description:
Keep button pressed
Release button
1.
2.
3.
4.
Note:
a) Make sure that no step takes longer than 30 seconds. Otherwise
the manual search run will stop.
b) You need to switch on the device manually, if it device cannot be
switched on or off using the remote. Insert a video tape or a DVD/CD
if you are looking for a VCR/CD/LD/DVD code. During the manual
search run, press the PLAY button to check whether the device
responds.
C. AUTOMATIC SEARCH RUN
This function permits to perform an automatic code search.
1. Switch on the device that you want to operate. VCR/CD/LD/DVD:
insert a video tape or a DVD/CD and press “Play”.
2. Select the device that you want to use on the remote control (TV,
VCR, DVD, AUDIO, CABLE, SAT).
3. Point the remote control directly at the desired device. Press the
SET and POWER button simultaneously for approx. 3 seconds.
Then release both buttons. The automatic search run starts.
4. The remote control will then try to switch off the device. Once that
happens, immediately press the button of the desired device on
the remote.
5. Press any button to finish programming.
D. SELECTING DEVICES
When setting your devices, it is recommended to perform the steps of
chapters A, B and C in the following order: TV, VCR, DVD, AUDIO,
CABLE, SAT .
Just select the device that you want to control and press the
appropriate device button.
DISPOSAL
Your universal remote control is delivered in a separate package to
protect it against damage during transport. All materials used are
valuable raw materials and can be collected for recycling.
Do not dispose of the remote control in the domestic waste.
Use to the collection points provided for the disposal. Please
inquire with your local authority about your local recycling
centre or collection point.
Used batteries do not belong in household waste! Return them
to a collection point for used batteries.
7
8
1
2
3
4
3
4-DIGIT NUMBER
SET
DEVICE
POWER
KEEP BUTTON
PRESSED
LED ON
PRESS
SET
DEVICE
DEVICE
KEEP BUTTON
PRESSED
LED ON
SET
POWER
PLAY
VCR/AUX
[DIRECTION]
ALL DEVICES
DEVICE
BUTTON
POWER-
BUTTON
DEVICE
BUTTON
POWER
+ SET
LED FLASHES
> 3 sec
UNTIL DEVICES
SWITCHES
OFF
DEVICE ON
Legend description:
Keep button pressed
Release button
SET
1
2
3
4
Legend description:
Keep button pressed
Release button
Maximex GmbH & Co. KG
LED OFF
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jumbo XXL-Universal-Fernbedienung bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jumbo XXL-Universal-Fernbedienung in de taal/talen: Duits als bijlage per email.

De handleiding is 0,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info