520196
7
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
23
OPTION: The telephone can be equipped with a SANIK 2.4V
650mAh Ni-MH battery, model 2SN-AAA65H-S-J1. which
enables the telephone to operate for a short period in case
of power failure. The battery is optional and not included.
Caution
Risk of explosion if the battery is replaced by an
incorrect type. Use only the SANIK 2.4V 650mAh Ni-MH
rechargeable battery pack, model 2SN-AAA65H-S-J1.
Contact your local supplier for the back-up rechargeable
battery.
You must disconnect the power supply unit and the
telephone line cord before installing the back-up
battery.
Do not dispose of the battery in fire. It may explode.
Dispose of used batteries according to the instructions.
Use only the Ktec Model KSLFB0750035W1EU (for the
European market except UK) / KSLFB0750035W1UK
(for the UK market)
power adaptor with red RJ11 plug
that came with the unit. Using other power adaptors
may damage the unit and invalidate your warranty.
Plug the adaptor to a socket outlet that is close to the
equipment and easily accessible.
1. Install the back-up battery (optional) following the
procedure in section A.4.
2. Connect one end of the coiled cord to the handset and
plug the other end into the RJ9 jack of the base station.
Note:
If desktop placement is preferred, please mount the
table stand first.
3. Connect the combo cord to the RJ45 jack of the combo
jack. Connect the line jack to the RJ11 line jack on the
base (16) and connect the DC jack to the base (17).
4. Plug the power supply unit into the main wall outlet and
connect the other end to the RED jack of the combo jack.
5. Connect one end of the telephone line cord to the
BLACK jack of the combo jack; connect the other end of
the telephone line cord to the country telephone plug
adaptor (optional).
6. Connect the country telephone plug adaptor to the wall
outlet for telephone.
A.1. Wall mounting
1. Pull the Combo cord downwards through the groove
(as shown above) in order to let it out at the bottom and
connect it to the Combo jack.
2. Mount the base station by the enclosed screws and plugs
for 6 mm drill.
A.2. Desktop placement - table stand
Slide the canals of the table stand into the tracks of the back
side on the base station. The table stand is mounted when
you hear a click.
The table stand can easily be removed again:
- Push the button inside the square hole at the bottom
of the base station, using a pen or a finger, and pull the
bracket away from the base station at the same time.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Jacob-Jensen-50-DECT

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jacob Jensen 50 DECT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jacob Jensen 50 DECT in de taal/talen: Engels als bijlage per email.

De handleiding is 2,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info