554792
2
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
JA-82K control panel installation manual - 2 - MKH51103
Contents:
1 Control panel architecture.................................. 3
1.1 Required system configuration 3
2 Preparing the control panel for installation ........ 3
3 Control panel main board................................... 3
3.1 Main board terminal description: 3
3.2 Hard-wired inputs on the main board 4
3.3 Installation of additional hard-wire input modules 4
3.4 Radio module installation 4
3.5 Y,X,V communicator module installation 4
3.6 Control panel memory chip 4
3.7 Wired keypad connection 4
3.8 Control panel resetting 5
4 Control panel power supply ............................... 5
4.1 Backup battery connection 5
4.2 Power supply connection 5
4.3 Powering-up the control panel for the first time 5
5 OASiS wireless devices .....................................6
5.1 Enrolling wireless devices to the control panel 6
5.2 Testing enrolled wireless devices 6
5.3 Signal strength measuring 6
5.4 Erasing enrolled devices 6
5.5 Enrolling the control panel to UC and AC modules 6
6 Control panel programming ............................... 6
6.1 Exit delay time 7
6.2 Entrance delay time 7
6.3 Alarm duration time 7
6.4 PGX and PGY functions 7
6.5 Changing telephone numbers in maintenance mode 7
6.6 Radio interference indication 7
6.7 Radio communications supervision 7
6.8 RESET enabled 7
6.9 Enrollment to a sub control panel for setting control 7
6.10 Master code reset 8
6.11 Enrollment to other devices (UC, AC) 8
6.12 Setting (Arming) without an access code 8
6.13 Triggered-detector indication 8
6.14 Confirmation of intruder alarms 8
6.15 Exit delay beeps 8
6.16 Exit delay beeps while partially setting (arming) 8
6.17 Entrance delay beeps 8
6.18 Setting (arming) confirmed by wired-siren chirp 8
6.19 Sirens always sound during audible alarms 8
6.20 Wireless siren alarm enabled (IW and EW) 9
6.21 Bypass user approval 9
6.22 Final-door detectors 9
6.23 Partial setting (arming) or system splitting 9
6.24 Automatic summer time (daylight saving time) 10
6.25 Pulse reaction of tamper sensors 10
6.26 Operating the PG outputs using 8 and 9 10
6.27 Permanent alarm status display 10
6.28 Tamper alarm if unset 10
6.29 Recording PG output activation to memory 10
6.30 Engineer reset 10
6.31 Social alarm feature 10
6.32 Annual check notification 10
6.33 Only single alarm indication 11
6.34 Setting (arming) by service code 11
6.35 Audible panic alarm 11
6.36 Higher control-panel receiver-sensitivity 11
6.37 Access by code plus card 11
6.38 Audible 24 hour intruder alarm 11
6.39 Service mode only with service and user code 11
6.40 Device reactions and section assignment 11
6.41 Code/card reactions and section assignment 12
6.42 Enrollment by keying in production codes 12
6.43 Automatic setting / unsetting schedule 12
6.44 Changing the service code. 12
6.45 Go to maintenance mode 12
6.46 Setting the internal clock 12
6.47 Editing keypad text 13
6.48 Recommended settings 13
7 Operating the system.......................................13
7.1 The system keypad 13
7.1.1 Keypad indicators: ..................................................13
7.1.2 LCD display.............................................................13
7.1.3 Keypad display sleep-mode....................................13
7.1.4 Keys ........................................................................13
7.1.5 Functions beginning with the key........................13
7.2 Programming access codes and cards 13
7.3 Setting and unsetting (arming/disarming) the system 14
7.4 Maintenance Mode 14
7.4.1 Displaying which user/card positions are occupied 14
7.4.2 Bypassing devices ..................................................14
7.4.3 Protecting a car near the system ............................14
8 Operating/programming the system by PC...... 14
9 Basic guidance for installers ............................ 14
10 Trouble-shooting ..............................................15
11 Control panel technical specifications.............. 16
12 Control panel programming sequences........... 17
13 Programming access codes and cards............ 20
This manual is valid for control panel JA-82K
The control panel can be configured by a PC running OLink software.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-82K OASIS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-82K OASIS in de taal/talen: Engels als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron JA-82K OASIS

Jablotron JA-82K OASIS Installatiehandleiding - Deutsch - 23 pagina's

Jablotron JA-82K OASIS Gebruiksaanwijzing - English - 23 pagina's

Jablotron JA-82K OASIS Aanvulling / aanpassing - English - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info