555058
3
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
The JA-80Y GSM communicator - 3 - MFJ55304
if it is desired that the events be reported to the SMS phone connected
to the communicator then program tel. number 001 into the memory
SMS report text consists of: installation name, event name, number and
name of the event source (device or code), date and time. Example:
“Report from your alarm: setting 47: device Time 01.08. 11:27
if other events or texts should be reported to a particular number,
change the communicator settings (see 5.4 and 5.5)
when storing tel. numbers, if you key in 7 after the last digit of the
phone number (the symbol is also stored) and continue with one
more digit (1, 2, 3, 8 or 9), then if this tel. number calls the system, the
system will behave as if ” digit“ had been keyed in just after the first
ring, i.e. as if it had been entered manually on the system keypad –
see section 3.5. Example: entering 81 5 777 777 777
79
0
authorizes calls from tel. number 777777777 to trigger output PGY for
2 seconds (after the first ringing signal from this number the 9
command will be executed. The PGY output should be programmed for
a 2 sec. pulse function. This setting is suitable for opening an electric
door lock, automatic gate etc.
4.1. Programming
The most convenient programming is best done by a PC running
Comlink software or via the Internet and website: www.GSMLink.cz
or by
programming SMS – PRG sequence
Programming is also possible via the system keypad:
The control panel must be in Service mode - if it is not, enter 0 Service
code (factory default: 8080) while the system is unset.
Enter the relevant programming sequences – see the following description
To exit service mode press the # key
5. Programming sequences
Function Sequence Options Factory default
Language setting 981 xx
xx=01 to 17 where:
01=EN,02=CZ,03=SK,04=NL,05=DE,06=PL,07
=DA,08=IT,09=PT,10=FI,11=NO,12=SV,
13=FR, 14=HU, 15=RU, 16=TR, 17=SP
English
GSM signal strength
measurement
922
On keypad or in ComLink software range 0/4 to 4/4
In reply to STATUS SMS: range 0/9 to 9/9
exit by pressing #
-
Tel. number programming for
reporting to telephones
81 M xx..x 0
M = memory 1 to 8
xx..x = tel. number (max.20 digits)
keying in 9 = + and 7 =
81 M 0 erases the number in memory M
all M1 to M8 erased
Selection of events to report by
SMS
82 M ec x
Selection of events to report by
phone call
83 M ec x
M = tel. number memory from 1 to 8
ec = event code (see 5.4)
x=1 report, x=0 no report
M1 & 2 alarms by SMS
M3 & 4 alarms by SMS and call
M5 & 6 alarms by SMS and call +
Set/Unset by SMS
M7 alarms by call
M8 technical faults by SMS (to installer)
SMS text editing*
Texts can be edited by Comlink software or by SMS instruction:
code TXT n,text,n,text... or by www.GSMLink.cz
via Internet
see 5.5
Enable reporting to phones 80 x
x=0 disabled
x=1 enabled (all programmed by 82.. & 83..)
x=2 enabled without reporting
setting/unsetting by users 41 to 50 (codes,
cards & key-fobs) and master code
setting/unsetting
enabled
Remote access 903 x
x=0 disabled
x=1 enabled (by phone and Internet)
enabled
Forwarding of incoming SMSes 926 x
x=0 no, x=1 yes = if the incoming text is not an
SMS instruction it will be forwarded to the first
programmed number in memories M1 to M8
yes
SMS instruction confirmation 927 x x=0 no, x=1 yes (by SMS reply) yes
Reaction to incoming calls 904 x
x=0: no reaction
x=1 to 8: answers after 1 to 8 rings
x=9: answers after the 2
nd
call
answers after 5 rings (25s)
Simulated phone line function 951 x
x=0 tel. line (GSM gateway)
x=1 alarm system keypad
x=2 off
x=3 automatically calls an emergency tel.
number when the tel. receiver is picked up
tel. line
Emergency tel. number
952 xx..x 0
xx..x = tel. number (max.20 digits) erased
GSM signal dropout indication 921 x x=0 no, x=1 yes (15min. dropout =Fault) no
Phone microphone sensitivity 953 x
Phone speaker loudness 954 x
x=1 to 9 (9 = maximum) 5
Number to be periodically called
to maintain SIM card validity
924 xx..x 0 xx..x = tel. number (max.20 digits), 9240=erase
erased
Using an SMS instruction to
configure automatic SIM card
credit interrogation *
Via an SMS instruction to the alarm system: code CREDIT uu..u xx yyy zz where code = master or service
code, uu..u = GSM network command string to ascertain the credit (e.g. 104#) , xx=auto-interrogation
frequency in days, yyy=minimum acceptable balance, zz= the textual position at which the number showing the
balance starts in the reply message from the GSM provider. If the credit is lower than the minimum, the
provider’s SMS will be auto-forwarded to numbers M1 and M8 for someone to top up the pre-paid SIM card.
Getting your www.GSMLink.cz
registration code sent to your
mobile phone
910 xx...x 0
xx..x = your mobile phone number -
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-80Y bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-80Y in de taal/talen: Engels als bijlage per email.

De handleiding is 0,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron JA-80Y

Jablotron JA-80Y Gebruiksaanwijzing - English - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info