555056
7
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
The JA-80V LAN/PSTN line communicator - 7 - MKA51202
5.10. Initialization of GSMLink communication
After successfully connecting the communicator to the LAN network
913 should be entered to initialise communication to the
www.GSMLink.cz
server (the server will register the IP address of the
communicator).
To access the system remotely via the Internet it is necessary to
register it on www.GSMLink.cz
(after communication has been
initialised). To register the system (see 7.5) you will need the
communicator registration code, which is printed on the label which
you will find on the communicator board.
Note:
the communicator reports regularly to the GSMLink server to update
the communicator’s IP address in the server database (the period of
the regular reports is more frequent the more frequently GSMLink
access is used). If you try to access the alarm system via GSMLink
after the communicator’s dynamic IP address has changed, you can
be notified by GSMLink that it is necessary to wait for the next
regular communication from the system. To shorten this waiting time
you can enter the above sequence (913) on the system keypad
while in service mode or you can do it remotely by calling the
communicator from a phone, whose number was programmed for
this purpose (see the following text).
5.10.1. Tel. number to initialise GSMLink communication
GSMLink communication can be initialised remotely by calling (ringing)
from a phone number which can be programmed by:
914 xx...x 0 where xx...x = phone number (max. 20 digits)
Notes:
After the first ring from the above programmed number the
communicator will report to GSMLink to update its IP address,
this remote way of initialisation is only possible if the phone line
used by the communicator supports CLIP caller ID recognition).
Factory default setting: erased
5.11. Tx SMS center telephone number
To send SMS by CLIP protocol via the telephone line it is necessary to
program the Tx SMS center telephone number by:
942 xx...x 0 where xx...x = Tx SMS center tel. number
Note:
Contact your telephone line provider to learn the Tx SMS center tel.
number.
Factory default setting: erased
5.12. Rx SMS center telephone number
To receive SMS by CLIP protocol via the telephone line it is necessary
to program the Rx SMS center telephone number by:
942 xx...x 0 where xx...x = Rx SMS center tel. number
Note:
Contact your telephone line provider to learn the Rx SMS center tel.
number,
check also how to activate delivery of the SMSes in text form (some
providers convert SMS text into voice messages).
Factory default setting: erased
5.13. Testing reporting to an ARC
To test reporting to an ARC enter:
961a where a = ARC number (1 or 2)
Note:
The event code “Communication test” (ec=31) will be sent to the ARC.
The green LED flashes while the report is being sent, if the red LED
goes off it indicates that the report to the ARC was unsuccessful.
5.14. Testing calls to a phone number
To test that the communicator is capable of calling the phone numbers
programmed into its memories enter:
962M where M is the phone number memory 1 to 8
If memory M contains a phone number, this number will be called and
if the phone call is answered, there will be an acoustic signal.
5.15. Remote programming by the SMS instruction
Instruction PRG can be used to send programming and operating
sequences to the alarm system:
code_PRG_seq,seq,seq...
where:
code is valid access or service code (e.g. 8080 or 1234)
_ space
seq programming sequence usually set via the keypad
Note:
In the sequence can be used characters 0 to 9, and #)
When the valid instruction is received, communicator simulates
entering the keys on the keypad, comma in the SMS is taken as a
pause in the sequence entering
System must be unset and switched to the service mode
The number of sequences in one SMS is limited by the maximum size of
the SMS in the GSM network.
Example: by sending SMS 8080 PRG
08080,201,# the exit delay will
be set to 10s
5.16. Triggering LAN re-login
After entering
935 the communicator will log out of the LAN network and
then re-log in (DHCP updates).
5.17. Communicator reset
Entering 98080 returns the communicator to its factory default settings and
texts, erases all telephone numbers and disables reporting.
5.18. Automatic DHCP
The factory default settings in the communicator expect automatic
DHCP in the LAN network. If you need to enter the network
parameters manually, the automatic DHCP should be disabled with
this sequence and network parameters should be entered manually by
the following sequences before the communicator is connected to the
LAN network.
9300 DHCP disabled
9301 DHCP enabled
Factory default setting: enabled
5.19. Communicator IP address
If DHCP is disabled (see 5.18) program the communicator IP address
by:
931 xxx xxx xxx xxx
where:
xxx…x is IP address
Example: if the IP address is 192.168.1.23 enter:
931 192 168 001 023
Factory default setting: 192.168.001.211
5.20. Network mask
If DHCP is disabled (see 5.18) program the network mask by:
932 xxx xxx xxx xxx
where:
xxx…x is the network mask
Example: if the network mask is 255.255.255.0 enter:
932 255 255 255 000
Factory default setting: 255.255.255.000
5.21. Network gateway address
If DHCP is disabled (see 5.18) program the network gateway by:
933 xxx xxx xxx xxx
where:
xxx…x is the gateway address
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Jablotron JA-80V bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Jablotron JA-80V in de taal/talen: Engels als bijlage per email.

De handleiding is 0,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Jablotron JA-80V

Jablotron JA-80V Gebruiksaanwijzing - Nederlands - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info