700431
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Limited Warranty – Amplifiers (USA)
JL Audio warrants this product to be free of defects in materials and workmanship
for a period of two (2) years from the original date of purchase. This warranty is
not transferable and applies only to the original purchaser from an authorized
JLAudio dealer. Should service be necessary under this warranty for any reason due
to manufacturing defect or malfunction, JL Audio will (at its discretion), repair or
replace the defective product with new or remanufactured product at no charge.
Damage caused by the following is not covered under warranty: accident, misuse,
abuse, product modification or neglect, failure to follow installation instructions,
unauthorized repair attempts, misrepresentations by the seller. This warranty does
not cover incidental or consequential damages and does not cover the cost of
removing or reinstalling the unit(s). Cosmetic damage due to accident or normal
wear and tear is not covered under warranty.
Warranty is void if the product’s serial number has been removed or defaced.
Any applicable implied warranties are limited in duration to the period of the
express warranty as provided herein beginning with the date of the original
purchase at retail, and no warranties, whether express or implied, shall apply to
this product thereafter. Some states do not allow limitations on implied warranties,
therefore these exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights, which vary from state to state.
If you need service on your JL AUDIO product:
All warranty returns should be sent to JL Audio ’s Amplifier Service Facility
freight-prepaid through an authorized JL Audio dealer and must be accompanied
by proof of purchase (a copy of the original sales receipt). Direct returns from
consumers or non-authorized dealers will be refused unless specifically authorized
by JL Audio with a valid return authorization number. Warranty expiration on
products returned without proof of purchase will be determined from the
manufacturing date code. Coverage may be invalidated as this date is previous
to purchase date. Non-defective items received will be returned freight-collect.
Customer is responsible for shipping charges and insurance in sending the
product to JL Audio. Freight damage on returns is not covered under warranty.
For Service Information in the U.S.A. please call
JL Audio Customer Service:
(954) 443-1100 9:00 AM – 5:30 PM (Eastern Time Zone)
JL Audio, Inc.
10369 North Commerce Pkwy. Miramar, FL 33025
(Do not send product for repair to this address)
International Warranties:
Products purchased outside the United States of America are covered
only by that country’s distributor and not by JL Audio, Inc.
V X10 0 0/5i _ M AN _ 0 41118
Connections
Power Connector
Connection Wire Capacity Description
+12 VDC (+) 2 AWG Positive (+12V) Power Connection to Battery
Ground (–) 2 AWG Negative (GND) Chassis Ground Connection
Remote 18 to 10 AWG Positive (+12V) Remote Turn-On Input from Source Unit
Analog Input Harness
Label
Plug/Wire
Color
Description
Input 1 White RCA Channel 1 Signal Input
Input 2 Red RCA Channel 2 Signal Input
Input 3 White RCA Channel 3 Signal Input
Input 4 Red RCA Channel 4 Signal Input
Pre-Out Left White RCA Preamp Signal Output 1
Pre-Out Right Red RCA Preamp Signal Output 2
Remote Blue Positive (+12V) Turn-On Output (475 mA limit)
Valet Green Negative (GND) Ground Input (activates the Valet Mode Preset)
Speaker Output Harness
Label Wire Color Description
A
White
Ch. 1
(+) Positive Speaker Output Ch. 1&2 Bridged (+)
White/Black (–) Negative Speaker Output
B
Gray
Ch. 2
(+) Positive Speaker Output
Gray/Black (–) Negative Speaker Output Ch. 1&2 Bridged (–)
C
Green
Ch. 3
(+) Positive Speaker Output Ch. 3&4 Bridged (+)
Green/Black (–) Negative Speaker Output
D
Purple
Ch. 4
(+) Positive Speaker Output
Purple/Black (–) Negative Speaker Output Ch. 3&4 Bridged (–)
Subwoofer Output Connector
Connection Wire Capacity Description
SUB + 14 to 10 AWG (+) Positive Subwoofer Output
SUB – 14 to 10 AWG (–) Negative Subwoofer Output
Data Connections
Label Type Description/Use
JLid-COMM RJ45 Jack Optional accessory connections (VXi-BTC, VXi-HUB, etc)
JLid-CTRL RJ45 Jack Optional DRC (Digital Remote Controller) connection
USB USB A/B Port Computer connection to congure TüN™ Software Interface
DIGITAL-In S/PDIF Port 2-channel, optical (Toslink) digital input
DIGITAL-Out S/PDIF Port 2-channel, optical (Toslink) digital output
SD + Reset
Reset Buttons Multifunction use (Reboot/Reset/Device Firmware Update mode)
Micro SD Slot Used for future expansion
Specifications
Amplier Specications
Amplier Topology 2nd-Gen NexD™ High Speed Class D
Power Supply Type Unregulated MOSFET Switching
Operating Voltage 10 - 15V DC
Min. Copper Power/GND Wire 4 AWG
Recommended Fuse 80 A
Standby Current Draw 2.1 mA
Input Voltage Range 200 mV - 16 V RMS
Rated RMS Power @ 14.4V,
<1% THD+N
Main @ 4 Ω
75W x 4
Main @ 2 Ω
100W x 4
Main @ 4 Ω Bridged
200W x 2
Sub @ 4 Ω
400W x 1
Sub @ 3 Ω
500W x 1
Sub @ 2 Ω
600W x 1
Rated RMS Power @ 12.5V,
<1% THD+N
Main @ 4 Ω
60W x 4
Main @ 2 Ω
90W x 4
Main @ 4 Ω Bridged
180W x 2
Sub @ 4 Ω
360W x 1
Sub @ 3 Ω
480W x 1
Sub @ 2 Ω
600W x 1
Frequency Response
Main: 12 Hz - 24 kHz (+0, -1dB)
Sub: 12 Hz - 1 kHz (+0, -1dB)
Analog
Inputs
S/N Ratio
(A-weighted, 20 kHz
noise bandwidth)
Main: 99 dB (Referred to rated power),
80 dB (Referred to 1 W)
Sub: 99 dB (Referred to rated power),
72 dB (Referred to 1 W)
Digital
Input
S/N Ratio
(A-weighted, 20 kHz
noise bandwidth)
Main: 100 dB (Referred to rated power),
81 dB (Referred to 1 W)
Sub: 99 dB (Referred to rated power),
73 dB (Referred to 1 W)
Damping Factor
Main: >100 / 50 Hz @ 4 Ω, >50 / 50 Hz @ 2 Ω
Sub: >100 / 50 Hz @ 4 Ω, >50 / 50 Hz @ 2 Ω
DSP Specications
Processor AKM AK7738, processing at 24 bit/96 kHz
Analog
Inputs
Type Line-Level, Dierential-Balanced
Number of Channels 6, via harness-mounted female RCA jacks
Digital
Input
Type S/PDIF Optical via chassis-mounted Toslink port
Bit Depth/Sample Rate
Up to 24 bit/192 kHz
Analog
Outputs
Type 2 Line-Level, via harness-mounted female RCA jacks
Max Output Level 4 V RMS
Digital
Output
Type S/PDIF Optical via chassis-mounted Toslink port
Bit Depth/Sample Rate 24 bit/96 kHz
Dimensions
L x W x H 11.32 in x 6.62 in x 2.12 in / 287 mm x 168 mm x 54 mm
What is TüN?
TüN™ is software that you use to configure, tune and control your VXi
amplifier, and other JL Audio DSP products. TüN™ automatically recognizes
what it is connected to, and allows you to make adjustments with a
clear interface specifically set up for that product. TüN™ is available for
download for free in a variety of applications, for computers and most
handheld devices. For more information, visit: jlaudio.com/tun
For Windows® PC or Mac® computers, TüN™ connects via
USB and offers complete control and command of the entire
VXi feature set from the comfort of your desk or driver’s seat.
Software also runs in demo mode, without connected amplifiers,
for offline setup or demo purposes. Test drive it for free!
For iPad or Android tablets. Enjoy the full-featured TüN™ software
experience on your tablet, with the freedom of a wireless connection
via Bluetooth®. Requires VXi-BTC Bluetooth® Communicator.
Wireless connection and streamlined options, for fast and simple
amplifier setup. Download TüN™ Express for iPhone, iPad and Android
phones & tablets. Requires VXi-BTC Bluetooth® Communicator.
+12 VDC - Positive (+12V) Battery Connection
Ground - Negative (–) Ground Connection
Remote - Positive (+12V) Turn-On Input From Source Unit
JLid-COMM - Optional Network Hub or
Bluetooth® Communicator Connection (Sold Separately)
JLid-CTRL - Optional Digital Remote Controller
(DRC) Connection (Sold Separately)
SUB - To Subwoofer(s): (+ and –)
Input 6 - Ch. 6 Input
Input 5 - Ch. 5 Input
Input 2 - Ch. 2 Input
Input 1 - Ch. 1 Input
Pre-Out Right - Analog Preamp Output
Pre-Out Left - Analog Preamp Output
Remote - Turn-On Output (+12V)
Valet - Valet Preset Toggle (–)
Input 4 - Ch. 4 Input
Input 3 - Ch. 3 Input
D - To Speaker(s): (+ and –)
C - To Speaker(s): (+ and –)
B - To Speaker(s): (+ and –)
A - To Speaker(s): (+ and –)
DIGITAL-In - From Optical Digital (S/PDIF) Source
DIGITAL-Out -
To Optical Digital (S/PDIF) Input on Next Device
USB A/B Cable -
To Computer with TüN™ software installed
SPEAKER
OUTPUTS
ABCD
+
SUB
Wiring Diagram - VX1000/5i
Standard CAT5 Network Cables
Optical Audio Cables
Included
Not Included
ANALOG INPUTS / PRE-OUTS
LED Status/Condition Reporting
LEDs located on the chassis top and connection panel are used to
communicate amplier status and condition. Refer to the table below for
the location and meaning for each behavior.
LED / Location Behavior Status/Condition›
LED Ring /
Amplier Top
Flashing Blue Critical Voltage
Flashing Red Critical Temperature
Flashing Yellow Excessive Current
Upper Left LED /
JLid-COMM Port
and
JLid-CTRL Port
Green Detecting JLid™ Device
Blue JLid™ Connection Success
Yellow Invalid JLid™ Device
Flashing Red Excessive Current
Upper Right LED /
JLid-COMM Port
Flashing Red
Critical Voltage/Temperature
Excessive Remote Output Current
Upper Right LED /
JLid-CTRL Port
Green Active TüN™ Connection
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw JL Audio 5i bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van JL Audio 5i in de taal/talen: Engels als bijlage per email.

De handleiding is 0,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info