784024
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
V1.1
305503000600
Support email: support@foscam.com
Quick Setup Guide
Video Doorbell
Physical Description
Camera Micro SD Card Slot
Reset
Light sensor
Microphone
Front Panel Rear Panel
Doorbell button
Power Input Port
Type-C Port
Mounting slots
Speaker
Bottom Panel
Security screw hole
2
Add Device: Connection via the Foscam
App (Recommended)
It is strongly recommended that you complete the "add devices"
process on the Foscam app before the doorbell hardware is installed.
To ensure a smoother video experience on your smart phone, it is recommended that your smart
phone meet the following specications:
iOS: version 11 or higher.
Android: 4.1 or higher, using a device with a Graphics Processing
Unit (GPU).
Before You Get Started
Scan the QR code below to download and install the Foscam APP, and learn how to add the
doorbell to the APP.
Note: For the best experience, please update the APP to the latest version! 3
1. Plug the smaller end of the USB cable into the Type-C port on the back of the Video Doorbell,
and the larger end into a USB wall charger such as your smartphone charger (DC5V 1.0A power
output recommended for faster charging). Please wait for a few seconds until you hear Ready
for WiFi conguration.
WiFi connection
Conrm
WiFi connection
WiFi
2. Make sure that your smart phone is connected to your WiFi router.
Foscam_1
Foscam_2
xxxxx_2.4G
xxxxx_5G
Tips: If you didn’t hear the voice prompt, press and hold reset for about 10 seconds to reset the
camera.
Please note that it is forbidden to connect the doorbell to AC and Type -C power
supply at the same time.
4
Tips: The camera supports dual-band 2.4GHz and 5GHz WiFi networks, so you can choose the
channel with the stronger signal to use. For example, choose your SSID: XXXXX_2.4G or XXXXX_5G.
3. Open the foscam APP and please sign up for a Foscam account, or sign in if you have one already.
4. After logging into Foscam APP, select Tap to add a camera or "+" icon on the upper right
corner, then select "Scan the QR code" and scan the QR code that labeled at the bottom of your
camera.
Scan the QR code, located at
the bottom of your camera
Tap + icon Select ”Scan the QR code”
Tap to add a camera
Add Device
<
Scan the QR code
Search in LAN
Manually add
Scan QR Code
<
Model: XXX
MAC ID:000000000000
Username(default):admin
Password(default):(blank)
DDNS:XXXXXX.
myfoscam.org
FCC ID:XXXXX
IC:12558A-XX
S/N:FIAI1403000001
UID:XXXXXXXXXXX
FHD Wireless IP Camera
5. In Add Device, if you hear "Hello Foscam", select the checkbox and tap ”Next”, continue to
conrm that the device is in the blue ashing state and tap ”Next”. In “WiFi connection, enter
your WiFi's password and tap "Conrm" (see illustrations on next page).
5
Heard "Hello Foscam"
and tap "Next"
Conrm
device
ashes blue
I have heard “Hello Foscam”
Add Device
Next
Power the device on until
the device voice prompts
"Hello foscam"
<
Device flashes blue
Add Device
Next
Conrm that the device is
in the blue ashing state
Enter your WiFi's password
and tap "Conrm"
Wi-Fi connection
The device will added by scanning the QR
code and sound waves.
Foscam_2.4G
<
2.4GHz / 5.0GHz
WiFi Password
Conrm
6. Please scan the QR code on the doorbell with the smartphone camera, then you will hear a
voice prompt say ”WiFi connecting. Select the checkbox and tap ”Next”.
Place the QR code directly
in front of the camera
For WiFi configuration, please point the
QR code to the camera directly.
WiFi connection
<
I have heard the voice prompt
“WiFi connecting”
Next
Tick the checkbox and tap “Next”
10~15cm
3.94~5.9in
Tips: Please place the QR code on the phone screen about 10 to 15cm (3.94 to 5.9in) away, and if
you encounter diculties you can try to move the screen slowly around 10 – 15cm (3.94 - 5.9in).
6
13
12
Remove the existing doorbell button near the front door. Pull the two wires out carefully when
removing the old doorbell. Straighten the wire ends if necessary.
What's required: Dual-purpose screwdriver
Dual-purpose screwdriver
(Phillips screwdriver side)
Step 4
11
After removing the cover of the mechanical chime or digital chime, use the wire connection
terminal with the Power Kit as pictured. After wiring is completed, replace the cover.
You can scan the QR code below to search and watch the power kit installation video.
9
Video Doorbell Installation
Note:
1. Make sure you have installed the Foscam App, and have scanned the doorbell QR code and
completed the "add device" process in the app before beginning the hardware installation
process.
2. If you choose to use AC power to power the video doorbell, you need to ensure that the
specication of the transformer in your home is 8V~24V AC, the minimum power requirement
is 8VA.
3. If you use DC power to power the video doorbell, you need to prepare a DC12V~30V power
adapter, the minimum power requirement is 6W.
4. If you use Type-C interface to power the video doorbell, you need to prepare a DC5/1A power
adapter, the minimum power requirement is 5W.
Step 1
Ring the existing doorbell, make sure it’s working and locate the place of your existing chimes in
the house.
Step 2
Shut o the master circuit breaker in your house. Turn the lights in your home on / o to make
sure the electricity in your house is properly shut o.
OFF
If you're not comfortable doing it yourself, consult a qualied electrician.
8
Note: If the process of adding a camera fails, please reset your camera and try adding again
according to the above method.
Camera added successfully
and the name has been set
7. Wait a few seconds until the camera noties you that the Wireless connection succeeded”,
which means your camera has connected to your WiFi successfully. After, you can set the
camera name and tap Save in "Set name" interface.
Reset
Set name
Save
Camera added successfully
Please set the camera name:
My Camera
<
Device white light flashes
Add Device
Next
The Wi-Fi conguration is
complete, and the white
light of the device ashes
Conrm device white light ashes
7
10
YouTube
Step 3
Indoor chimes are generally of two types: mechanical, or digital. If you need to use the existing
mechanical chime or digital chime in your home, please install the Power Kit in parallel to the
chime. Power Kit is generally used to solve the problem of abnormal ringing of the chime after the
video doorbell replaces the traditional doorbell buttons.
How to distinguish between Digital Chime and mechanical Chime, please scan the following QR
code to view.
What's required: Dual-purpose screwdriver
Dual-purpose screwdriver
(Phillips screwdriver side)
YouTube
10. After completing the above steps, you can begin installing your camera.
9. Tapping on the play button in the video box will jump to the “Camera Login” setting interface.
For your security, please set a new username and password for your camera before viewing live
video.
Set a new username and password
Camera Login
New camera username
Re-enter new camera
password
New camera password
Tap “ ”
Foscam_camera
On
Submit
8. In “Select Chime Type, tap ”Select Chime Type”, and tap ”Next”. In “Select Chime Type”, Select
Chime Type and tap "Mechanical chime" or "Digital chime" or "None" (Please select the type of
your existing chime).
Tap Select Chime Type
Select Chime Type
Select Chime Type
The video doorbell can work
with your existing Mechanical
chime or Digital chime. Please
select the type of your existing
chime after watching the video
with a description on this
subject.
Mechanical chime
Select Chime Type
Mechanica Chimel Digtal Chimel
OR
Digital chime
None
Select the type of
your existing chime
Note: Please carefully conrm the existing chime type in your home. If the chime type is selected
incorrectly, the transformer and chime at home will be damaged, causing the doorbell and chime
to not work properly. Generally, a mechanical chime refers to the ringing sound made by striking a
metal with a metal striker, while digital chime refers to the ringing sound made by playing music
through a speaker.
If you are still not sure, please watch the chime type description video carefully, or consult our
customer service sta.
Bypass Model: If you don’t want to use the existing chime, you can switch the cable on the Power
kit to the bypass interface, and then connect it in parallel to the existing chime. This will
short-circuit the chime at your home. You can choose to add WiFi chime,realize the function
of chime. If you choose to use the Power Kit by pass mode, be sure to set the chime type to
"None" in your APP to avoid damaging the transformer.
14
15
FRONT
TRANS
REAR
Remove the cover
Replace the cover
Bypass Mode
Bypass Mode
Bypass Mode
APP add doorbell
instruction video
YouTube
Download the
Foscam APP
1
Whats in the Box
1 x
Type-c cable
1 x 5° Vertical angle bracket
1 x 15° Horizontal angle bracket
1 x
Power Kit
1 x Video Doorbell
1 x Mounting bracket
2 x
Wire Nuts
1 x
Silicone Plug
1 x
Dual-purpose screwdriver
1 x
Drill Hole
Position Template
1 x Thick mounting bracket
2 x
Wire Extenders
1 x Quick Setup Guide
1 x
Expansion Screws
Quick Setup Guide
Video Doorbell
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Foscam VD1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Foscam VD1 in de taal/talen: Engels als bijlage per email.

De handleiding is 17.26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info