603534
3
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
3
D
S
GB
F
Operating the heater via the numeric
keys on the telephone
You first have to set up a connection between the
telephone and the
CALLTRONIC
.
To do this, dial the number assigned to you by
your network operator.
The
CALLTRONIC
signals the following text:
“Eberspächer heater – Input PIN“.
Now enter the 4-digit PIN No.
(The PIN is set to 0000 in the works).
The following 3 operating modes
are available
Note:
If malfunctions occur in the heater during operation
(e.g. due to a lack of fuel), these can be interro-
gated after the malfunction has occurred using
Function 6 (where the diagnosis cable is connected).
The malfunction is corrected with the aid of the
operating instructions for the heater.
1. Stand-alone operation
The function keys 0 to 7 are active at the telephone
(see the following table).
The push-button installed can be used to switch the
heater on or off. If the heater is switched on using
the push-button, the heating function is activated
with a duration of 40 mins. The push-button also
functions without a SIM card. The push-button
flashes if an error occurs in the heater.
2. Combination with mini clock
The function keys 0 to 3 and 5 to 7 are active (see
following table).
The functions of the function key 4 (Select operating
mode) are taken over by the mini clock (see installa-
tion and operating instructions for the mini clock).
When switching on the heater via the mini clock, the
operating mode last set with the mobile phone is
always activated. If a malfunction occurs in the
heater, the reading in the mini clock display changes
between the time and --.
If the
CALLTRONIC
is connected with the mobile
phone, -- appears in the mini-clock display.
3. Combination with mini controller
When combined with the
CALLTRONIC
, the mini
controller only serves to specify the set value.
Select heating mode at the mini controller. The red
LED in the mini controller only serves as an operat-
ing display not as an operating mode display the
operating mode is selected via the remote control.
If the PIN No. is wrong, the following message
appears:
“PIN invalid“.
You now have the opportunity to enter the correct
PIN No.
If the PIN No. is correct, the following message
appears:
“PIN OK – Input command“.
You can now enter your settings for the heater via
the
CALLTRONIC
.
The following table on Pages 4 and 5 shows which
functions are available to you.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eberspacher CALLTRONIC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eberspacher CALLTRONIC in de taal/talen: Engels als bijlage per email.

De handleiding is 0,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Eberspacher CALLTRONIC

Eberspacher CALLTRONIC Gebruiksaanwijzing - Deutsch - 8 pagina's

Eberspacher CALLTRONIC Gebruiksaanwijzing - Deutsch - 14 pagina's

Eberspacher CALLTRONIC Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info