701129
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Eberspächer Climate Control Systems GmbH & Co. KG | Eberspächerstraße 24 | 73730 Esslingen
info@eberspaecher.com | www.eberspaecher.com
Setting heating mode preselection at the mini controller:
Press the
button to select heating mode – the preselection
is saved. You can set the setpoint temperature default with the
temperature preselection controller. To confirm, the red LED lights up
for approx. 3 sec, but the heater is not started.
Setting ventilation mode preselection at the mini controller:
Press the
button to select ventilation mode – the preselection is
saved. The temperature preselection controller has no function in
ventilation mode. To confirm, the blue LED lights up for approx. 3 sec,
but the heater is not started.
B) Heater is switched on (mini timer is active)
The ON / OFF button on the mini timer is used to switch the heater
on in the saved mode (heating / ventilation - as preselected using
the mini controller) mode). If the heater is in heating mode the red
LED lights up; in ventilation mode the blue LED lights up as a check
signal.
Using the mini controller to switch between heating and
ventilation modes:
Press the
button to switch to heating mode. You can set the
setpoint temperature default with the temperature preselection
controller. If the heater is in heating mode the red LED lights up as a
check signal.
The preselection of the mode is updated.
Press the
button to switch to ventilation mode. The temperature
preselection controller has no function in ventilation mode. If the
heater is in ventilation mode the blue LED lights up as a check signal.
The preselection of the mode is updated.
Heating mode is ended with an after-run.
Using the mini controller to change the setpoint temperature
default:
The temperature preselection controller can be used to set the
temperature default at any time during heating mode.
Emergency operation – error when preselecting the operating
mode:
Unable to save the mode preselection.
The red LED flashes for approx. 10 sec. The mini controller then
switches to emergency mode (operating mode preselection: heating).
The heater remains switched off. Emergency mode can be reset by
renewed preselection or by a voltage reset (remove the fuse).
If the heater is switched on by the mini timer in emergency mode, the
red LED lights up and flashes. The heater is in heating mode with set
setpoint temperature default.
It is not possible to change modes in emergency operation.
The heater can only be switched off via the mini timer.
Service
Technical Support
If you have any technical questions or problems with the heater, the
control unit or the operating software, please contact the following
service address:
support-UK@eberspaecher.com
22 1000 90 96 70 EN 12.2016 Subject to change without notice © Eberspächer Climate Control Systems GmbH & Co. KG
EN | Operating Instructions | Airtronic Mini-Controller
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Eberspacher Airtronic Mini-Controller bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Eberspacher Airtronic Mini-Controller in de taal/talen: Engels als bijlage per email.

De handleiding is 0,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Eberspacher Airtronic Mini-Controller

Eberspacher Airtronic Mini-Controller Gebruiksaanwijzing - Nederlands - 2 pagina's

Eberspacher Airtronic Mini-Controller Gebruiksaanwijzing - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info