Pagina terug
Pagina verder
NOTE: The software cannot initialize when the device is plugged in
and running slide show.
1. Disconnect device USB cable from PC if it is connected.
2. Insert CD and follow the on-screen instruction to install “Photo
3. After the application software has been successfully installed,
you could connect device to PC with the provided USB cable.
4. Windows OS will set up hardware driver automatically.
5. Launch “Photo Viewer” and enjoy.
Windows 98 / 2000 / ME / XP / Vista
** Important: Install application software before connect device to PC. **
Microsoft OS User Manual
Read First
Quick Installation Guide
Important Safety Instructions
This Digital Photo Viewer is a stand-alone device that is designed
to transfer and store images from a PC and then display the images.
Using the application software supplied with this device, you can
organize,edit, enhance and download the image in your PC to this
device using USB.
IMPORTANT: You must install the software to your computer
before connecting the device to your computer for the first
1. Insert the CD-ROM and run the file SETUP_UT1.02.EXE;
Follow the onscreen instructions.
Installing the Software / Hardware
The user should not attempt to service the device beyond those
means described in these operating instructions.
All other servicing should be referred to qualified service
This device will be fully charged after two hours.
Do not leave the device connected to the USB for longer than 12
consecutive hours otherwise damage and overheating of the device
may occur.
Do not expose this to water or moisture.
Do not remove cover. No user serviceable parts inside. Refer
servicing to qualified personnel.
The device should be away from sources of high heat such as
radiators or stoves.
The device should be connected to a power supply
only of the type described in the operating instructions or as marked
on the unit.
Care should be taken so that objects are not placed on, nor liquids
spilled on or inside the device.
2. The application Photo Viewer will be installed on your computer
and a shortcut to the application will appear on your desktop.
3. After the software is installed, connect the device to the computer
with the USB cable supplied. The hardware drivers will be
installed automatically. Follow the on-screen instructions and
accept the installation screens that appear.
4. After hardware installation is complete, launch the PhotoViewer
application from the shortcut on your PC desktop.
NOTE: If you are unable to launch the software or connect to your
Photo Viewer, go to the Troubleshooting of this manual for
more information.
The internal battery of the device may be charged using the USB
cable when connected to a powered USB port(such as USB port on
your computer) or hub.It will be fully charged after two hours. At full
charge, the device can provide up to 3 hours of run time.
Charging the Battery
Editing Images
1. Select an Image to Edit
2. Edit Image
In the Edit Image Window you can
do the following:
Crop: click and drag the smaller
boxes (at the corners of the large
box)to increase or decrease the
area to be cropped.
Reposition: click and drag in the
center of the large box to change
the position of the crop.
Brightness / Contrast: click and
drag the slider bars.
NOTE: Images that are brighter and more contrast will look better on
the smaller monitor of the device.
Rotate: Use to rotate the image clockwise or counterclockwise.
3.Click DONE
The edited image will be added to the collection panel.
USB Cable
Mini B on Photo Viewer
USB on computer
View Photos
Arrange Sequence
Crop Photo
Transfer collection to Device
1. Connect to PC
Use the USB cable provided. Connect the large end to the computer
and the small end to the device.
2. Launch the Software
Photo Viewer
Double-click the shortcut on your desktop.Photo Viewer
4. Browse Images on Your PC
5. Select Images and Transfer to Collection Panel
The Image Preview area will display a thumbnail preview of all
of the images that are located in the
directory you have selected.
Use the File Manager to browse photos on your PC.
NOTE: The device reads JPG/ BMP/ TIF/ GIF/ PNG images.
Select the thumbnail image and click
to transfer the image as-is.
Select the thumbnail image and click to edit the
image before transferring (see Editing Images).
Using the Photo Viewer Software
3. View Photos Stored in the Photo Viewer
To view the photos: click " "
To delete a photo : select the photo and click " "
To delete all photos: click " "
Important !!
Do not disconnect the device until the download process is complete
and you have exited successfully from the Photo Viewer program.
To delete a photo: select the photo and click " "
To delete all photos: click " "
To change the order of the photo, select the photo then click " "
to move to the back and click " " to move to the front.
6. Organize Collection Panel
7. Save and Restore Collection Panel
To save the photos on the Collection Panel to your PC, click " "
To retrieve the the saved Collection Panel, click " " .
8. Download Collection Panel to Digital Photo Viewer
Click " " to download all images on the collection panel to
Digital Photo Viewer.
Crop Photo
Start Menu/ Control Panels/ Add Hardware.
2. When the Dialog box comes up, click the option that says “Yes,
I have already connected the hardware”.
3. In the list of Devices-Find “Photo Viewer” click NEXT and this will
give the status of the device. If a warning icon appears next to
the Photo Viewer then double click the icon and select the
option to “Reinstall the software”.
Deleting single photo
Turn off the slide show, select the photo you want to delete, press and hold
UP until “ DELETE” appears on the screen, and press MODE to delete.
Deleting all photos
Turn off the slide show, press and hold DOWN until “ DELETE ALL ” appears
on the screen, press MODE to delete.
Using the Function Keys
1. Monitor
2. Power / Play & Pause
3. Previous Image / Delete images
4. Next Image / Delete all Images.
5. Mini USB Connection
Using the Photo Viewer
Turning power on/off
To turn on power, press and hold MODE/ until the screen turns on.
To turn off power, you must turn off the slide show first, then press and hold
MODE until the screen turns off.
Manual viewing of photos
Upon powering up, the device is in browse mode, or manual viewing mode,
press to view the next photo, and press to view the previous photo.
NOTE: In browse viewing mode, the screen turns off automatically when
there is no key pressed in two minutes.
Slide show
Press MODE to change to slide show from browse mode, the screen displays
“Auto Play On”. Toturn off slide show,press MODE again and the screen
displays “Auto Play Off”.
Troubleshooting for lnstallation
If the device displays error messageDevice not connected
during installation, follow these steps to resolve:
A.For Software issues (Photo Viewer software can not launch)
1. Re-insert and launch the installation CD and choose “Remove”
or “Uninstall” from the Installer Menu.
2. Disconnect the USB cable and device from the computer and
3. After computer has restarted, launch the installer again and
reinstall the software.
NOTE: DO NOT connect the USB cable until after the software is
B.For Hardware installation issues (Device not recognized)
1. With the Viewer connected to the computer via USB go to the
Corrosion, oxidation, battery-leakage and any other gradually acidic defect of this
nature will invalidate the guarantee.
Disposal of Used Electrical & Electronic Equipment
The meaning of the symbol on the product, its accessory
or packaging indicates that this product shall not be
treated as household waste. Please, dispose of this
equipment at your applicable collection point for the recycling of
electrical & electronic equipments waste. In the European Union and
Other European countries which there are separate collection systems
for used electrical and electronic product. By ensuring the correct
disposal of this product, you will help prevent potentially hazardous to
the environment and to human health, which could otherwise be caused
by unsuitable waste handling of this product. The recycling of materials
will help conserve natural resources. Please do not therefore dispose
of your old electrical and electronic equipment with your household
waste. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
For more information and warranty conditions, please visit :
Power consumption 0.25W
Corrosion, oxidation, battery-leakage and any other gradually
acidic defect of this nature will invalidate the guarantee.

Hulp nodig? Stel uw vraag in het forum



Zoeken resetten

Misbruik melden neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.


Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.


Abonneer u voor het ontvangen van emails voor uw Akai ABF15S bij:

U ontvangt een email met instructies om u voor één of beide opties in te schrijven.

Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Akai ABF15S in de taal/talen: English als bijlage per email.

De handleiding is 0,54 mb groot.


U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.