496631
8
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
8
ENGLISH
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an optional outdoor antenna is
recommended.
Connect the outdoor antenna to FM 75 (COAXIAL) jack.
MOUNTING THE FRONT AND SURROUND
SPEAKERS
You can mount the front and/or the surround speakers,if you want
to do so.
Using wall mounting screws (not supplied)
Select a spot that will hold the weight of the speakers and carefully
mount the surround speakers so that they are firmly secured.
Using a speaker mounting kit (not supplied)
The front and surround speakers are equipped with a 5 mm
threaded insert on their back side. Use it to attach the ball shaft
of a speaker mounting kit on the market.
Refer to the instructions of the mounting kit for further information.
You can attach the speakers to the pedestal on the market with
the 5 supplies screws. Refer to the instructions of the pedestal
for further information.
AIWA disclaims any responsibility for injury to persons or
other accidents caused by not fitting the front and/or surround
speakers properly or if the place of the installation is not
suitable.
OPTICAL IN VIDEO 1/OPTICAL IN VIDEO 2
jack / OPTICAL OUT jack
The OPTICAL IN VIDEO 1 jack and OPTICAL IN VIDEO 2 jack
accept digital audio input from connected equipment.
The OPTICAL OUT jack outputs digital audio signals to the
connected equipment.
Connect digital audio playback/recording equipment, such as an
MD recorder , a DAT deck, or a CD-R deck, etc. with optional
optical fiber cables.
Connect the optical input jack of the connected equipment to the
OPTICAL OUT jack, and the optical output jack of the equipment
to the OPTICAL IN VIDEO 1 jack or the OPTICAL IN VIDEO 2
jack.
Before connecting the cable, remove the dust cap from the jacks.
Reattach them when the jacks are not to be used.
CAUTION ON CONNECTING EQUIPMENT TO THE
OPTICAL OUT JACK
When connecting digital equipment without a built-in Dolby
Digital or DTS decoder , do not play back Dolby Digital or
DTS source with multichannel surround sound. When
connecting equipment that does not comform to 96 kHz
Linear PCM source, do not play back 96 kHz Linear PCM
source. It may cause a high level of noise which could harm
your ears and damage the speakers.
The OPTICAL IN VIDEO 1 or 2 jack shares the same video
source as the VIDEO 1 or 2 jack.
SUBWOOFER jack
This jack outputs the low frequency sounds.
Your DVD system comes supplied with a passive (non-powered)
subwoofer , to be connected to the SUBWOOFER
terminals , as
described on page 6.
However , if you wish to connect an optional active (powered)
subwoofer , connect it to this
jack using an optional audio
connecting cord with RCA plugs.
PHONES jack
Connect headphones with a stereo mini plug (ø 3.5 mm,
5
/32 in.).
The jack is located at the front of this unit.
No sound is output from the speakers while the headphones
are plugged in.
When the headphones are plugged in, the Dolby Pro Logic
surround system is canceled. The Dolby Digital or the DTS
surround system automatically switches to the 2ch STEREO
mode.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Aiwa HT-DV90 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Aiwa HT-DV90 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info