Safety Precautions
Please observe the following safety tips and precautions
to ensure hazard-free use of the 1010.
Power requirements
The 1010 is powered by the supplied AC adapter .
To prevent malfunction and safety hazards, Do not
use any other kind of AC adapter.
When using the 1010 in an area with a different line
voltage, please consult your local ZOOM distributor
about acquiring a proper AC adapter.
Environment
Avoid using your 1010 in environments where it will
be exposed to:
• Extreme temperature
• High humidity or moisture
• Excessive dust or sand
• Excessive vibration or shock
Handling
Since the 1010 is a precision electronic device, avoid
applying excessive force to the switches and buttons.
Also take care not to drop the unit, and do not
subject it to shock or excessive pressure.
Alterations
Never open the case of the 1010 or attempt to
modify the product in any way since this can result
in damage to the unit.
Connecting cables to input and output jacks
You should always turn off the power to the 1010
and all other equipment before connecting or
disconnecting any cables. Also make sure to
disconnect all cables and the AC adapter before
moving the 1010.
Usage Precautions
Electrical interference
The 1010 uses digital circuitry that may cause
interference and noise if placed too close to other
electrical equipment, such as TV sets and radio
receivers. If such problems occur, move the 1010
further away from the affected equipment. Also,
when fluorescent lights or devices with built-in
motors are close to the 1010, the unit may not
function properly.
Cleaning
Use a soft, dry cloth to clean the 1010. If necessary,
slightly moisten the cloth. Do not use abrasive
cleanser, wax, or solvents (such as paint thinner or
cleaning alcohol), since these may dull the finish or
damage the surface.
Please keep this manual in a convenient place
for future reference.
ZOOM CORPORATION
NOAH Bldg., 2-10-2, Miyanishi-cho, Fuchu-shi, Tokyo 183, Japan
PHONE: 0423-69-7111 FAX: 0423-69-7115
Printed in Japan 1010-5000
