650492
11
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
EN
11
To cancel the delay
either press Start/Pause to cancel the delay; to start the selected
programme immediately, press Start/Pause again
or press and hold On/O to cancel the complete programme
setting.
Key lock
To lock the buttons and keys of the control panel against
unwanted operation.
To lock:
The washing machine must be switched on.
Press and hold the option button until the display
indicates that the keys are locked. The buttons and keys
are locked now; only On/O works.
If you switch the washing machine o and on again, the key
lock remains active until you unlock it.
To unlock: press and hold the option button again for at least 3
seconds, until the display indicates that the keys are unlocked.
INDICATORS
Door can be opened
Energy / Water monitor
Gives feedback about the energy and water
consumption of your programme setting.
The less indicators light up, the more economic
is your programme setting. Can still adapt after
sensing phase of laundry load.
Failure: Observe the display message.
For any failures , refer to section Troubleshooting in the
“Use and Care Guide.
Descaling
A display message will remind you regularly to descale the washing
machine. Find descaler appropriate for the washing machine on
www.whirlpool.eu.
To cancel the display reminder, press the OK key.
Connection status
If your washing machine has been already connected to
the Internet (see 6th Sense Live Remote Control / Setup
Procedure section in the Use and Care Guide) this indicator
provides a feedback about the status of the Internet connection
through your WiFi router.
When you switch on the washing machine, the connection status
indicator blinks: the washing machine is looking for a connection.
When it becomes solidly lit, it means that the appliance is properly
connected to the Internet.
The strength of the wireless signal is shown by the indicator (when
all the elements of the indicator are lit, the signal strength is strong).
6th Sense Live Remote Control
The 6th Sense Live feature allows to remotely monitor and
control your washing machine using a smartphone or a
tablet. To use this feature you have to successfully connect
the machine to your home wireless network and to the Internet by
following the set-up procedure described in the Use and Care Guide
(6th Sense Live Feature / Setup Procedure section).
You can monitor the status of your washing machine at any time
using the 6th Sense Live app. If you want to control the appliance
remotely (for example: to set and start a programme), the Remote
Control has to be enabled.
To enable Remote Control:
Make sure the router is on and connected to the Internet.
Switch on the washing machine.
Load your laundry, close the door, add the detergent and
make sure the water tap is open.
Make sure the Connection Status indicator is solidly lit.
Press the Remote Control button, the door locks and the
buttons and keys on the control panel are disabled. The
only controls still active are “Remote Control”, “ON/OFF”
and “Key Lock.
The washing machine is now in Remote Control mode and is
ready to be controlled via 6th Sense Live app.
If you start a programme remotely, at the end of the programme
the washing machine will automatically exit the Remote Control
mode and will switch o.
To manually exit Remote Control:
With the machine in Remote Control, press again the Remote
Control button. You will regain local control over the control panel
of the washing machine.
Rinse hold (selectable with Spin button)
Avoids automatic spinning of the laundry at the end of the
programme. The laundry remains in the last rinse water, the
display indicates the rinse hold and the programme does not
continue.
Suitable for delicate laundry which is not appropriate for spinning,
or which should be spun with a low spin speed. Not suitable for silk.
To select “Rinse hold”:
Press the spin button; select Rinse hold. The Rinse hold symbol on
the display lights up.
The display indicates when the programme has reached the Rinse
hold. Choose to:
drain the water, no spin:
press the Spin button, or the UP or DOWN key, to select
spin speed “0”. Or select programme Drain. Afterwards
press Start/Pause: the water will be drained and the
programme ended.
spin the laundry:
the default spin speed blinks - start the spin cycle by
pressing Start/Pause. Or select a dierent spin speed by
pressing the Spin button and the UP or DOWN key, and
press Start/Pause.
Finish in
Enables to have the laundry ready at a particular time by
setting a delay until end of the programme.
Choose a delay up to 23:30 hours. Only if you add detergent
manually: use powder - and not liquid - detergent with this function
to ll the detergent compartment for manual dosing.
Select programme, temperature and options.
Press the “Finish in button – the button lights up.
Press UP or DOWN key to select a delay up to 23:30 hours.
Press “Start / Pause - the countdown of the delay starts. The
display indicates the Finish in period (= time until end of
programme), as well as the default programme duration.
The programme starts automatically, in time to be nished at the
end of the delay period. On programme start, the delay on the
display is replaced by the current programme status.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool FSCR12441 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool FSCR12441 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Whirlpool FSCR12441

Whirlpool FSCR12441 Gebruiksaanwijzing en installatiehandleiding - English - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info