607070
3
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
3
EN
See Use and Care Guide for more details on functions / see last page for
information on how to obtain the Use and Care Guide
1. LOAD LAUNDRY
Prepare your laundry according to the recommendations in
section “HINTS AND TIPS”.
Make sure that fasteners are closed and ribbons tied together.
Open the door and load the laundry.
Observe the maximum load sizes given in the
programme chart
2. CLOSE DOOR
Make sure that no laundry gets stuck
between door glass and rubber seal.
Close the door so that you can hear it click
shut.
3. OPEN THE WATER TAP
Make sure that the washing machine is connected
to the mains.
Open the water tap
4. SWITCH ON WASHING MACHINE
Press the On/O button. An animation appears, and there
is a sound. The programme which was used last lights up.
Afterwards the washing machine is ready to be operated.
5. SET THE DESIRED PROGRAMME
Select programme:
Press the programme symbol on the control panel. Programme
name, default duration, temperature and spin speed as well as
maximum laundry load appear on the display.
Change temperature, if needed
Press the temperature button; the display indicates that the
temperature can be set.
Press the temperature button repeatedly
OR
press the UP or DOWN key until the needed temperature appears
on the display.
Change spin speed, if needed
Press the Spin button; the display indicates that the spin
speed can be set.
Press the Spin button repeatedly
OR
press the UP or DOWN key
until the needed spin speed, or Rinse hold, appears on the display.
DAILY USE
Select options, if needed
Press the options button. The options which are selectable
for the programme appear on the display.
Press the UP or DOWN key to navigate through the list of options.
Press the OK key to select an option; the option symbol lights up on
the control panel.
To deselect a selected option, press the OK key again.
Some options / functions can be selected by directly pressing the
button:
1 2
If such an option is not selectable for the programme, it switches o
automatically when the button is pressed.
Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more
information.
6. ADD DETERGENT
If you want to add the detergent manually, carefully pull
out the detergent dispenser and add detergent (and
additives) now, as indicated in section DETERGENT
DISPENSER.
Do not pull hard when opening the dispenser.
Observe the dosing recommendations on the detergent pack. If
you have selected PREWASH or FINISH IN, observe the instructions
in section PROGRAMMES AND OPTIONS, and FUNCTIONS.
Afterwards carefully close the detergent dispenser.
If you want the washing machine to dose the detergent
automatically, simply make sure the Auto Dosing function is
activated (refer to section OPTIONS, FUNCTIONS AND INDICATORS
/ Auto dosing). The detergent is added by the auto
dosing system after programme start.
7. START PROGRAMME
Press and hold Start/Pause” until the button lights up
solidly; the programme starts.
If you have selected Auto dosing, the display indicates
dispensing of the detergent after programme start. Observe the
instructions in section OPTIONS, FUNCTIONS AND INDICATORS /
Auto dosing function.
8. CHANGE A RUNNING PROGRAMME, IF NEEDED
You can still change the settings while a programme is running. The
changes will be applied, provided the respective programme phase
has not nished yet.
Before using this function, follow the instructions in the USE AND
CARE GUIDE/AUTO DOSING – FIRST USE to:
1. Set the correct water hardness level
2. Set tank 2 content. By default, Tank 1 is set for a detergent (your
main detergent), and Tank 2 is set for fabric softener. If you do not use
fabric softener, set Tank 2 for another detergent.
3. Check/adjust the preset dosing quantities.
By default, the system comes with the following dosing values:
• 80 ml detergent for Tank 1
• 30 ml softener for Tank 2
You need to adjust these preset dosing values to the dosing values
reported on the detergent and softener package that you intend to
use.
After the Auto Dosing function is set for use, ll the tanks with the
appropriate content and install the labels on the tanks accordingly, as
explained in the USE AND CARE GUIDE / AUTO DOSING – FIRST USE.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool FSCR 10433 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool FSCR 10433 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Whirlpool FSCR 10433

Whirlpool FSCR 10433 Snelstart handleiding - Français - 8 pagina's

Whirlpool FSCR 10433 Gebruiksaanwijzing - Français - 55 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info