655490

Whirlpool AWO 9687 Green Handleiding

2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
5019 301 06486/A
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as described in
the chapter “Detergent and Additives” in your Instructions for Use.
Turn the programme selector to the desired programme; the light
of the “Start/Pause” button blinks. The temperature and
spin speed indicated on the display can be altered by pressing the
“Temperature” button or the “Spin” button .
When the combination of programme and additional option(s) is not
possible, the indication switch off automatically. Unsuitable combinations
of options are deselected automatically. For certain programmes, an
option may already be preset; if you want you can deselect it.
“Clean +” button
• Choose this option if you use an in-wash additive for stain removal
(powder, for example “Vanish”) - it will optimize the additive’s
efficiency to get better wash performance and stain removal.
• Use with maximum load.
• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
• May prolong the programme by up to 15 minutes.
• Appropriate for use of stain removers and bleaches on oxygen
basis. Chlorine or perborate bleaches must not be used!
“Rapid” button
• Enables quicker washing by shortening the programme duration.
• Recommendable for only lightly soiled laundry.
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt).
Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when activating
the “Prewash” option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft water or
for washing baby linen, and helps people with allergies.
“Soil level” button
• Adapts the programme duration to the soil level of your
laundry. Also influences the detergent quantity
recommendation when using the “Dosing Aid” button.
= lightly soiled - = normally soiled - = heavily soiled
Not all soil levels are selectable for each programme.
“Spin” button (incl. “Rinse Hold” )
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If you select spin speed “0”, the final spinning is cancelled and
the water is drained out only. However, intermediate spin
phases remain during the rinse.
• If you select “Rinse hold” , the laundry remains in the last
rinse water without progressing to the final spin cycle, to avoid
creasing and prevent colours from changing. To activate the
“Rinse hold”, press the “Spin” button repeatedly until the “Rinse
hold” symbol on the display lights up.
- The wash programme stops to “Rinse hold” when the “Rinse
hold” light in the programme sequence indicator is on;
the light of “Start/Pause” button blinks.
- To terminate the “Rinse hold” by draining the water,
without any spinning, press the “Start/Pause” button.
- To terminate the “Rinse hold” by spinning the laundry, press
the “Spin” button to select the desired spin speed and then
“Start/Pause” to start the spin cycle.
- Do not leave the laundry to soak for too long in the “Rinse hold”.
CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
without “Rapid” with “Rapid”
Mixed 40 4.0 48 0.50 1:00 —
Cotton 95 7.0 74** 2.10 2:10 —
Cotton* 60 7.0 54 0.91 4:00 2:30
Cotton* 60 3.5 42 0.85 3:00
Cotton 40 7.0 69 0.80 2:45 1:45
Cotton* 40 3.5 42 0.60 2:30
Synthetics 60 3.0 46** 0.80 1:35 1:14
Synthetics 40 3.0 42 0.40 1:20 0:59
Delicates 30 1.5 60 0.50 0:45 —
Wool/Handwash 40 1.0 45 0.55 0:40
White 40 7.0 69 0.80 2:45 —
Light colours 40 5.0 65 0.50 1:20 —
Dark 40 5.0 45 0.60 1:40 1:15
SuperEco 60 7.0 69 0.84 4:00 —
AquaEco 40 3.0 19 0.45 1:00 —
Speed 15 30 3.0 30 0.20 0:15 —
Jeans 40 5.0 60** 0.60 1:30 1:15
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with
respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption refer
to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change
the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
* Reference programmes for Energy Label.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.
*** Automatic adaptation of programme duration after detection of wash load.
***
***
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper.
• Select programme, temperature, spin speed and options.
• Press the Start delay button to select a delay time up to 23 hours.
• Press the “Start/Pause” button .
The countdown of the delay time begins; the start delay
symbol and the colon between hours and minutes blink.
• The time delay indication disappears when the programme
starts and it is replaced by the remaining programme time.
• If you use the “Dosing Aid” button: select the delay time
BEFORE pressing the “Dosing Aid” button. The countdown
of the selected delay time begins after having pressed the
“Start/Pause” button for the second time (see separate
Instructions for Use concerning the “Dosing Aid”).
To cancel the “Start delay”
...before you press the “Start/Pause” button:
•Press the “Reset/Drain” button , or set the start delay
time to “0:00” - the delay time disappears after a few seconds.
...after having started the programme:
- Press the “Start/Pause” button - the delay time
disappears from the display. Press “Start/Pause” again if
you want to start the selected programme immediately.
With the “Dosing Aid” button, you can make your washing machine
indicate you the recommended detergent quantity for your wash
load, depending on the soil level selected and the size of the load.
• Helps to save detergent and protect the environment and also
sensitive skin by avoiding detergent overdosing.
• Before you use this function, you must adapt the washing
machine to the dosing amounts which are recommended for
the detergents you use. Also check if your region’s water
hardness corresponds with the water hardness level “soft” of
your washing machine - if not adapt it.
• Select programme, options and start delay BEFORE using the
“Dosing Aid” button.
For any details, refer to the separate “Dosing Aid” Instructions for Use.
Before starting and after end of a programme, the lamp lights to
show that the door can be opened. As long as a wash programme is
running, the door remains locked and must on no account be forced
open. In case you have an urgent need to open it during a running
programme, refer to “Reset a running programme before the end”.
Open the tap and press the “Start/Pause” button . The
indication lamp next to the “Start/Pause” button lights up.
The programme sequence indicator shows the current programme
phase, running from left to right through Wash, Rinse, Drain/Spin.
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:
• Turn the programme selector to a programme position, or run
a programme as usual.
• Press the 2 buttons marked with the key symbol
simultaneously for at least 3 seconds. A key-like symbol will shortly
appear on the display to indicate that the child lock is active.
Any time you try to change a programme setting with active child
lock, the display will briefly show the key-like symbol. The
programme setting cannot be changed anymore. The only change
possible is to switch the washer off by turning the programme
selector to the “Off/O” position. To deactivate the child lock:
• Press again the 2 buttons marked with the key symbol
simultaneously for at least 3 seconds.
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“Service”
Lighting up of the “Service” indication can be caused by a fault in an
electrical component.
“Water tap closed”
The washing machine has no or insufficient water supply; the water
tap might be closed or the water inlet hose kinked.
“Clean pump”
Waste water is not pumped out. The drain hose may be kinked or
the filter must be cleaned (see “Cleaning the filter” in your
Instructions for Use).
• All the lights of the programme sequence indicator are off
and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
The symbol will light up at the end of the programme if you used
too much detergent. Use less detergent next time. If the symbol
lights up and the display shows “Fod”, too much foam interrupted
the wash process; refer to the “Troubleshooting Guide” in your
Instructions for Use.
1. Press the “Start/Pause” button to pause the
programme. The light blinks.
2. Select the new programme, temperature, any options and
another spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
The “Reset/Drain” button cancels a programme before the end.
•Press and hold the “Reset/Drain” button for a few
seconds; an animation appears on the display. The water is
drained out; it may last some time until you can open the door.
SET A START DELAY
DETERGENT DOSING RECOMMENDATION
“DOOR OPEN” INDICATION
PROGRAMME START
CHILD LOCK
FAILURE INDICATIONS
PROGRAMME END
DETERGENT OVERDOSAGE INDICATION
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
RESET A RUNNING PROGRAMME BEFORE
THE END
30106486aGB.fm Page 2 Tuesday, June 28, 2011 2:39 PM
Black process 45,0° 150,0 LPI
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool AWO 9687 Green bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool AWO 9687 Green in de taal/talen: Engels als bijlage per email.

De handleiding is 1,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Whirlpool AWO 9687 Green

Whirlpool AWO 9687 Green Snelstart handleiding - Nederlands - 2 pagina's

Whirlpool AWO 9687 Green Gebruiksaanwijzing - Nederlands - 15 pagina's

Whirlpool AWO 9687 Green Snelstart handleiding - Deutsch - 2 pagina's

Whirlpool AWO 9687 Green Gebruiksaanwijzing - Deutsch - 15 pagina's

Whirlpool AWO 9687 Green Gebruiksaanwijzing - English - 12 pagina's

Whirlpool AWO 9687 Green Snelstart handleiding - Français - 2 pagina's

Whirlpool AWO 9687 Green Gebruiksaanwijzing - Français - 15 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info