1.
2.
3.
4.
7.
5.
6.
8.
Measuring Platform
1. Display Screen
2. Grey Delete Button
Used for erasing Graph data only
3. Orange SET Button
4. Grey Arrow Button
5. Foot Electrodes
6. Heel Electrodes
7. Personal Memory Keys
Used to store personal data
(Adult/Athlete/Child, Female/Male and
Height) for up to four individuals.
8. Weight-Only Key
Used for weight measurement only.
Display Icons
Adult Mode
Child Mode
Male
Female
Height
Athlete Mode
Accessories
9. Support Feet (4)
Only needed if unit is placed on
carpet. Do not use these feet
on hard flooring.
10. AA-Size Batteries (4)
Printed Material
This Instruction Manual
Customer Questionnaire
Product Guarantee
9.
10.
PREPARATION
Inserting the Batteries
1. Locate the battery compartment underneath the unit.
2. Open the cover, insert the batteries as shown.
3. When changing batteries, change all batteries at once. Always ensure that the
batteries are inserted correctly.
Note: Be sure that the polarily of the batteries is set properly. If the batteries
are incorrectly positioned, the fluid may leak and damage floors. If you do not
intend to use this unit for a long period of time, it is advisable to remove the
batteries before storage.
Positioning the Unit
1. Place the unit on a hard, flat surface.
2. If using on carpet, insert the support feet as shown.
Do not use on carpet more than 20mm thick. Do not use support feet on a hard,
flat surface.
Attaching the Support Feet
If (and only if) you would like to place the unit on carpet, insert the supplied
support feet into the holes at the four corners on the bottom of the measuring
platform.
Selecting kg, st-lb or lbs
1. Press and at the same time. The display will flash as shown.
2. Press to select kg, st-lb or lbs. Press to confirm.
3. The display will flash your choice. The unit will emit a short ‘beep’. The unit will
turn off.
Note: If using kg, then height is set to metres. If using st-lb, lbs, then height is
input to feet and inches.
Auto-off Function
The auto-off will function within 60 seconds if:
•
The measurement process is interrupted, or a mistake is made.
•
The platform is overloaded.
•
If you do not touch any of the keys for 60 seconds.
•
Once the measurement process is complete.
Open as shown.
Direction of the batteries.
