659113
10
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
8
en
Guest mode allows you to program the monitor for one-time use without reading a personal data
number.
Press the Guest button to activate the monitor, and then set the age, select Female or Male and
specify the height.
Step onto the monitor after “0.0” is shown on the display. The weight is displayed first. Continue
standing on the monitor until the Body Fat % reading is shown on the display. The reading is
displayed for 40 seconds.
Note: Do not step off until the Body Fat % is shown.
Note: If you step onto the monitor before “0.0” appears, “Err” appears on the display and readings
cannot be obtained.
Programming the Guest Mode
Press the Weight-only button. After 2 to 3 seconds, “0.0” appears on the display and the monitor
beeps. When “0.0” appears on the display, step onto the monitor. The body weight reading appears.
The display lights for about 20 seconds, after which the power turns off automatically.
Taking Weight Measurement Only
If the following problems occur ...then...
•Thewrongweightformatappearsfollowedbykg,lb,orst-lb
Refer to “Changing the Weighing Unit” on p.5.
•“Lo”appearsonthedisplay,orallthedataappearsandimmediatelydisappears.
Batteries are low. When this message appears, be sure to replace the batteries immediately since weak batteries affect the accuracy
of your measurements. Replace all the batteries at the same time with new AA-size batteries.
Note: Your settings are not erased from the memory when you remove the batteries.
•“Err”appearswhilemeasuring.
Please stand on the monitor and keep as still as possible.
The monitor cannot accurately measure your weight if it detects movement.
The monitor cannot take measurements if the Body Fat Percentage is higher than 75%.
•TheBodyFatPercentagereadingdoesnotappearor“-----”appearsaftertheweightismeasured.
Your personal data has not been programmed. Follow the steps on p.6.
Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned with the guides on the
measuring platform.
•“OLappearswhilemeasuring.
Reading cannot be obtained if the weight capacity is exceeded.
Troubleshooting
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tanita BCG-01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tanita BCG-01 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info