76
Operation with Bluetooth (Using Guest Mode)
1) Before activating the scale, make sure the corresponding Bluetooth device is turned on.
2) Press the to turn on the scale, as noted by a single beep.
3) Within 60 seconds, activate the communication sequence within the Bluetooth device to initiate
the pairing process with the scale.
If 60 seconds is exceeded an error message will appear, see page9 for error message codes.
*If you want to use the scale without activating Bluetooth, press the OFF key to turn off the scale,
while PCSET is displayed, Press the Guest key again (within 60 seconds) to turn the scale on,
the Bluetooth function will now be deactivated and you can measure body composition.
4) The pairing process is completed on the corresponding Bluetooth device and the scale, as noted
by a double beep.
6) All the Pre-stored personal data will be displayed one by one.
7) The unit will beep again and the display will show “ 0.0 ”.
Now step onto the platform.
5) Set Age, Select Female or Male ( Standard or Athlete ), specify the height and the select activity level.
7) The result will show after measurement is completed, noted by a double beep.
The data will then be sent to the corresponding Bluetooth device.
8) The scale will automatically shut off when ---
*The user remains on the scale for 30 seconds.
*The user get off from the scale, and then after 30 seconds.
Operation with Bluetooth (Using Personal key) continued
To See other readings, carefully step off scale, press the up button continually to display readings in the order
listed below. ( Press the down button for reverse. )
The Up / Down buttons will not function while remaining on scale.
Body Water %
Mascle Mass
Physique Rating
DCI
Body Fat %
Weight Visceral Fat
Bone Mass
Metabolic Age
