545027
3
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
GB GB
2
3
1. Set Year
Press and hold the /Down button for 3 seconds to turn on the unit.
Press the
or buttons to set year and then press SET button.
The unit will beep once to confirm.
(Applicable year: 2006-2050)
SETTING
(
RESETTING
)
DATE AND TIME
2. Set Month
Press the or buttons to set month and then press the SET button.
The unit will beep once to confirm.
3. Set Day
Press the or buttons to set day and then press the SET button.
The unit will beep once to confirm.
4. Set Hour
Press the or buttons to set hour and then press the SET button.
The unit will beep once to confirm.
5. Set Minute
Press the or buttons to set minute and then press the SET button.
The unit will beep twice to confirm the programming.
The unit will then shut down automatically.
Note :
If you change the date to a date prior to the current date, all tracking data for all users
will be lost.
After you replace the batteries, repeat step 1 – 5 on “SETTING (RESETTING) DATE AND TIME.
Replacing the batteries will cause the loss of date and time settings.
60 seconds or more of inactivity will cause automatic shut off during this process. No data will be saved
as a result.
If you make a mistake or wish to turn the unit off before you complete the programming, press
the OFF button to turn the unit off. No data will be saved as a result.
I
f you press (not press and hold) the /Down button, you can see the current date and time on
the display.
Positioning the Monitor
Place the measuring platform on a hard, flat surface where there is minimal vibration to
ensure safe and accurate measurement.
Note: To avoid possible injury, do not step on the edge of the platform.
Handling Tips
This monitor is a precision instrument utilizing state-of-the-art technology.
To keep the unit in the best condition, follow these instructions carefully:
•Do not attempt to disassemble the measuring platform.
•Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.
•Avoid excessive impact or vibration to the unit.
•Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
Never submerge in water. Use alcohol to clean the electrodes and glass cleaner (applied to a cloth first) to keep them shiny; avoid soaps.
•Do not step on the platform when wet.
•Do not drop any objects onto the platform.
•Do not carry the unit by holding the hand-electrodes.
•Do not release the hand-electrodes until the cable is completely retracted into the unit.
•Do not pull the cable more than red mark.
PREPARATIONS BEFORE USE
Inserting the Batteries
Open the battery cover on the back of the measuring platform. Insert the supplied AA-
batteries as indicated.
Note: Be sure that the polarity of the batteries is set properly. If the batteries areincorrectly
positioned the fluid may leak and damage floors. If you do not intend to use this unit for a
long period of time, it is advisable to remove the batteries before storage.
Please note that the included batteries from factory may have decreased energy levels
over time.
Heels centered on
electrodes
Toes may overhang
measuring platform
Note: An accurate reading will not be
possible if the soles of your feet are not
clean, or if your knees are bent or you are in
a sitting position.
GETTING ACCURATE READINGS
To ensure accuracy, readings should be taken without clothing and under consistent
conditions of hydration. If you do not undress, always remove your socks or stockings,
and be sure the soles of your feet are clean before stepping on the measuring platform.
Be sure that your heels are correctly aligned with the electrodes on the measuring
platform. Don't worry if your feet appear too large for the unit accurate readings can still
be obtained if your toes overhang the platform.
It is best to take readings at the same time of day. Try to wait about three hours after
rising, eating, or hard exercise before taking measurements.
While readings taken under other conditions may not have the same absolute values, they
are accurate for determining the percentage of change as long as the readings are taken in
a consistent manner. To monitor progress, compare weight and body fat percentage
taken under the same conditions over a period of time.
SWITCHING THE WEIGHT MODE Note: For use only with models containing the weight mode switch
You can switch the unit indication by using the switch on the back of the scale as shown in the figure.
Note: If weight mode is set to pounds or stone-pounds, the height programming mode will be automatically set to feet and inches. Similarly,
if kilograms is selected, height will be automatically set to centimetres.
AUTOMATIC SHUT-DOWN FUNCTION
The automatic shut-down function shuts off the power automatically in the following cases:
•If you interrupt the measurement process. The power will shut down automatically within 10 to 20 seconds,
•depending upon the type of operation.
•If an extreme weight is applied to the platform.
•During programming, if you do not touch any of the keys or buttons within 60 seconds.*
•After you have completed the measuring process.
*Note: If the power shuts off automatically, repeat the steps from “Setting and Storing Personal Data in Memory” (p.4).
BC-558-iron/取 09.10.21 3:22 PM ページ5
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tanita BC-558 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tanita BC-558 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 7,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info